Abstract:Calcium aluminate phases have a particular effect on the early heat release during setting initiation and have a substantial influence on the further workability of ordinary Portland cement. The nature of the calcium aluminate hydration products and its kinetics strongly depends on sulfate content and humidity. The effect of mineralisers on melt formation and viscosity is well described for calcium silicate systems, but information is still lacking for calcium aluminates. Therefore, the synergistic effect on the crystal structure and hydration mechanism of the tricalcium aluminate phase of the addition of mineralizers, i.e. Li 2 O, CuO, SO 3 to the raw meal is here investigated. Co-doped calcium aluminate structures were formed during high-temperature treatment. Thermal analysis (TG–DTA and heating microscopy) was used to describe the ongoing high-temperature reaction. Resulting phase composition was dependent on the concentration of the mineralizer. While phase pure system was prepared with low mineralizer concentrations, with increasing mineralizer content the secondary phases were formed. Raman spectroscopy and XPS analysis were used to investigate the cation substitution and to help describe the cations bonding in co-doped calcium aluminate system. Prepared powders have been hydrated in a controlled manner at different temperatures (288, 298, 308 K). The resulting calorimetric data have been used to investigate the hydration kinetics and determine the rate constant of hydration reaction. First-order reaction (FOR) model was here applied for the activation energy and frequency factor calculations. The metastable and stable calcium aluminate hydrates were formed according to initial phase composition. In phase pure systems with low S content, the formation of stable and metastable hydrates was depended on the reaction temperature. Conversely, in systems with secondary phases and higher S content, the hydration mechanism resembled that which appears in calcium sulfoaluminates.

Intrinsic reactivity and dissolution characteristics of tetracalcium aluminoferrite

Dissolution and early hydration of tricalcium aluminate in aqueous sulfate solutions

Molecular insight into the initial hydration of tricalcium aluminate

Influence of Fe2O3 on the hydration kinetics of tricalcium aluminate

Understanding why Alite is responsible of the main mechanical characteristics in Portland cement

Solubility of tricalcium aluminate from 10 °C to 40 °C

Hydration characteristics of tetracalcium aluminoferrite phase in mixes containing β-hemihydate and phosphogypsum

Synthesis of alite, belite and ferrite in both monophase and polyphase states and their hydration behavior

A kinetic Monte Carlo study of the C 3 S dissolution mechanism

Hydration Characteristics of Tricalcium Aluminate in the Presence of Nano-Silica

Iron in carbonate containing AFm phases

Fundamental Discrepancy of Chemical Reactivity of Tricalcium Oxy Silicate (alite), Dicalcium Silicate (Belite), and Their Polymorphs: A Density Functional Theory Study

Hydration in diluted solutions of brownmillerite extracted from SR cement and synthetic brownmillerite

Hydration kinetics of C3A: effect of lithium, copper and sulfur-based mineralizers

Early Hydration and Viscoelastic Properties of Tricalcium Aluminate Pastes Influenced by Soluble Sodium Salts

Formation, Stability, and Crystallinity of Various Tricalcium Aluminate Polymorphs

New Insights into the Dissolution Kinetics of Alite Powder and the Effects of Organic Toughening Materials

Silicate Dissolution Mechanism from Metakaolinite Using Density Functional Theory

Atomistic Insights into Silicate Dissolution of Metakaolinite under Alkaline Conditions: Ab Initio Quantum Mechanical Investigation

Dissolution of Portlandite in Pure Water: Part 2 Atomistic Kinetic Monte Carlo (KMC) Approach

Effect of Al2O3 on Sintering Reaction of Calcium Ferrite