Abstract:Solid-state lithium metal batteries attract much attention for their high theoretical specific capacity and safety. However, the poor interfacial combination between the solid electrolyte (SE) and Li anode usually results in unavoidable growth of Li dendrites and interfacial side reactions. In this work, we propose a simple and effective strategy to modify the interface of the electrolyte/Li anode by scraping a graphite layer on the electrolyte surface facing the anode. The graphite-modified solid electrolyte (G-SE) has a high electrochemical potential window exceeding 4.6 V and high ion conductivity of 3.08 × 10–4 S·cm–2 at ambient temperature. This G-SE membrane is suitable for high-voltage solid-state lithium metal batteries, the assembled NCM622/G-SE/Li cell shows an initial capacity of 160 mAh/g at 0.5 C and a retention capacity of 100 mAh/g after 200 cycles. The good electrochemical performance is attributed to the graphite interfacial modification; the graphite coating and Li can spontaneously react to form a LiC6 layer, which improves the SE/Li interfacial combination and suppresses the growth of lithium dendrites and interfacial side reactions.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c05153?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c05153</a>.EDS point analysis for the Li sheet after cycling (Figure S1); enlarged images of <a class="internalNav" href="#fig6">Figure </a><a class="internalNav" href="#fig6">6</a>a (Figure S2); battery case with test window (Figure S3); C 1s XPS spectrum of the Li sheet with graphite after cycling (Figure S4); lithium metal optical microscope image (Figure S5); digital photo of the lithium metal after 24 h of lithium/G-SE/lithium battery shelving (Figure S6); and the ion transport number calculation table (Table S1) (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c05153/suppl_file/sc0c05153_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Adjusting the interface structure of graphdiyne by H and F co-doping for enhanced capacity and stability in Li-ion battery

Enhancing Lithium-Storage Performance Via Graphdiyne/Graphene Interface by Self-Supporting Framework Synthesized.

An In-Situ Synergistic Enhancement Strategy from G-C3n4 and PDOL Composite Solid Electrolyte on the Interface Stability of Solid-State Lithium Battery

Enabling Enhanced Lithium Ion Storage Performance of Graphdiyne by Doping with Group-15 Elements: A First-Principles Study

A Superior Stable Interlayer For Dendrite-Free Solid-State Lithium Metal Batteries

A bicomponent electrolyte additive towards stabilized interface for high-performance lithium-ion batteries

Interfacial Evolution of the Solid Electrolyte Interphase and Lithium Deposition in Graphdiyne-Based Lithium-Ion Batteries

Advanced Multi‐layered Electrode with Planar Building Blocks Structure for High Performance Lithium‐ion Storage

Highly Efficient Interface Modification between Poly(Propylene Carbonate)-Based Solid Electrolytes and a Lithium Anode by Facile Graphite Coating

Hierarchical 3D Porous Hydrogen-Substituted Graphdiyne for High-Performance Electrochemical Lithium-Ion Storage

Molecular Design of Highly Li-ion Conductive Cathode-Electrolyte Interface Enabling Excellent Rate Performance for Lithium-Ion Batteries

In Situ Co-Growth Lif-Li3n Rich Dual-Protective Layers Enable High Interface Stability for Solid-State Lithium-Metal Batteries

Fabrication of Composite Gel Electrolyte and F-Doping Carbon/Silica Anode from Electro-Spun P(VDF-HFP)/Silica Composite Nanofiber Film for Advanced Lithium-Ion Batteries

Fluoride graphdiyne as a free-standing electrode displaying ultra-stable and extraordinary high Li storage performance

Functional Copolymer Derived Self‐Adapting LiF‐Rich Interphase Toward Deep Cycling Lithium Metal Batteries

Improving the cyclability performance of lithium-ion batteries by introducing lithium difluorophosphate (LiPO2F2) additive

Catalytic Strategies Enabled Rapid Formation of Homogeneous and Mechanically Robust Inorganic‐Rich Cathode Electrolyte Interface for High‐Rate and High‐Stability Lithium‐Ion Batteries

High energy density primary cathode with mixed electron/ion interface

Tailoring Acetylenic Bonds in Graphdiyne for Advanced Lithium Storage

Designing the efficient lithium diffusion and storage channels based on graphdiyne

Integrating high ionic conductive PDOL solid/gel composite electrolyte for enhancement of interface combination and lithium dentrite inhibition of solid-state lithium battery