Abstract:In this study, a novel low‐cost ceramic membrane was successfully produced using the extrusion method by mixing zeolite with smectite clay. This sustainable membrane exhibits excellent properties, including a favorable microstructure, high water permeability, and significant reductions in chemical oxygen demand, hardness, and color in treated pulp paper wastewater and colored solutions. The selected membrane demonstrated high mechanical resistance (65 MPa) and was regenerated using an ultrasonic process to prevent irreversible fouling after filtration. Low‐cost separation techniques are crucial for treating wastewater. Developing inexpensive membranes made from natural materials has become a popular research area in recent years. Tubular membranes were produced by adding 10% organic additives to a mixture of 80% zeolite and 10% smectite. New composite ceramic membranes from zeolite and smectite were prepared using the extrusion method to create a plastic paste and characterized using XRD, SEM, EPMA, and FTIR. The impact of sintering temperature (Tsint, 850–950 °C) on membrane properties, such as microstructure, mechanical strength (MS), water permeability, and filtration performance, was investigated. The MS and shrinkage rate increased with Tsint. At 950 °C, the resulting composite membrane exhibited a high MS of over 65 MPa, a relatively low porosity of 30%, appropriate for membrane filtration, and a water permeability of 65 L·h−1·m−2·bar−1. When applied to remove pollutants from wastewater, this membrane demonstrated a high color retention of 98.4% from an aqueous Evans blue‐colored solution (Effluent 1). For extensive application to wastewater treatment, this membrane showed a high‐efficiency level for treating real effluent produced by the pulp industry, removing 62.4% of chemical oxygen demand, 36% of hardness, and 82% of color. Finally, an ultrasonic cleaning procedure allowed the restoration of 70% of the initial permeability after four cycles for both effluents. Thanks to the exciting properties offered by these membranes and their competitive cost of less than $ 20·m−2, these membranes are appropriate for treating industrial wastewater.

Synthesis of a Hybrid Membrane of Polysulfone with Zinc Oxide for Cleaning Textile Effluents

Novel ZnO-Modified Polyethersulfone Nanocomposite Membranes for Nanofiltration of Concentrated Textile Wastewater

Hierarchical, Self-Healing and Superhydrophobic Zirconium Phosphate Hybrid Membrane Based on the Interfacial Crystal Growth of Lyotropic 2D Nanoplatelets.

Novel polysulfone hybrid ultrafiltration membrane prepared with TiO2-g-HEMA and its antifouling characteristics

Azido-group Functionalized Graphene Oxide/polysulfone Mixed Matrix Ultrafiltration Membrane with Enhanced Interfacial Compatibility for Efficient Water and Wastewater Treatment

Preparation and characterization of polysulfone-polyurethane membranes for recovery of simulated wastewater from industrial textile processes

Development of an antimicrobial and antifouling PES membrane with ZnO/poly(hexamethylene biguanide) nanocomposites incorporation

Novel ultrafiltration membrane with MXene nanosheet/zinc oxide for water purification with high performance and enhanced antifouling properties

Unveiling the relationship between MOF porosity, particle size, and polyethersulfone membranes properties for efficient decontamination of dye and organic matter

A novel synergistic effect of TiO2 and ZnO incorporation in PES-based thin-film nanocomposite nanofiltration membrane for treatment of textile wastewater

Preparation of novel zwitterionic polysulfone ultrafiltration membranes for the dual-enhanced antifouling and antibacterial properties by in-situ one pot crosslinking reaction

Fabrication of a Novel Antifouling Polysulfone Membrane with in Situ Embedment of Mxene Nanosheets

Fabrication of Polysulfone-Surface Functionalized Mesoporous Silica Nanocomposite Membranes for Removal of Heavy Metal Ions from Wastewater

Modification of polyethersulfone membranes by Polyethyleneimine (PEI) grafted Silica nanoparticles and their application for textile wastewater treatment

ZIF-67/SA@PVDF Ultrafiltration Membrane with Simultaneous Adsorption and Catalytic Oxidation for Dyes

Development of Polyethersulfone/α-Zirconium phosphate (PES/α-ZrP) flat-sheet nanocomposite ultrafiltration membranes

ZrO2 Nanoparticles Filler-Based Mixed Matrix Polyethersulfone/Cellulose Acetate Microfiltration Membrane for Oily Wastewater Separation

Facile post-treatment of PSf membranes with hexane for fractionation and concentration of alkaline textile wastewater

Preparation and characterization of ZnO/polyethersulfone (PES) hybrid membranes

Improvement of PES Nanocomposit Membrane Performance Through UV and ZNO Concentration for Refinery Waste Water Purification

Preparing Sustainable Membranes Made From Zeolite–Smectite for Treating Textile Wastewater and Pulp Industry Wastewater