Abstract:Four imidazolium-based room temperature ionic liquids containing phosphonyl functional groups, i.e. 1-(3′-O,O-diethylphosphonyl-n-propyl)-3-alkylimidazolium tetrafluoroborates and hexafluorophosphates, were synthesized. The physical properties of the resulting synthetic products were evaluated, and their tribological behaviors as the lubricants for an aluminum-on-steel sliding system were evaluated on an oscillating friction and wear tester, with the emphasis being placed on the effect of the O,O-diethylphosphonyl groups in the ionic liquid molecules on the tribological behaviors. Thus the friction and tests were conducted at a frequency of 25Hz, a sliding amplitude of 1mm, and for a duration of 30min. The worn aluminum surface was analyzed by means of scanning electron microscopy, energy dispersive X-ray analysis, and X-ray photoelectron spectroscopy. It was found that the synthesized ionic liquids had better friction-reducing and anti-wear ability for the aluminum-on-steel system than their nonfunctionalized courterparts (1-ethyl-3-hexylimidazolium tetrafluoroborate, coded as L206, and 1-propyl-3-octylimidazolium hexafluorophosphate, coded as LP308). Especially, they had much better load-carrying capacity than L206 and LP308. The tribological behaviors of the synthetic lubricants were dependent on both the anions and the side-substituted alkyl chains attached to the imidazolium cations. Moreover, physical adsorption and complicated tribochemical reactions were involved during the sliding process of the Al-on-steel system under the lubrication of the synthetic functionalized ionic liquids, which led to the generation of physically adsorbing and chemically reacting films composed of five-member-ring complex compounds, metal fluorides, nitrogen oxide, and FePO4 on the rubbed Al surface. Those physically adsorbing and chemically reacting films contributed to effectively decrease the friction and wear of the aluminum sliding against steel.

The effect of chemical structure on the tribological performance of perfluorosulfonate ILs as lubricants for Ti-6Al-4V tribopairs

The Effect of Nanoparticle Functionalization on Lubrication Performance of Nanofluids Dispersing Silica Nanoparticles in an Ionic Liquid

Molecular structure insight into the tribological behavior of sulfonate ionic liquids as lubricants for titanium alloys

Effect of two halogen-free ionic liquids with different anions on the tribological properties of TC4

Effect of Tetraalkylphosphonium Based Ionic Liquids As Lubricants on the Tribological Performance of a Steel-on-steel System

Lubrication Mechanism of TC4 Titanium Alloy Against Silicon Nitride by ILs ([Li (Synthetic Esters)] NTF2)

Tribological performance of phosphonium based ionic liquids for an aluminum-on-steel system and opinions on lubrication mechanism

Exploring the Effect Mechanism of Alkyl Chain Lengths on the Tribological Performance of Ionic Liquids

Investigation Of Tribological Behavior Of Al-Si Alloy Against Steel Lubricated With Ionic Liquids Of 1-Diethylphosphonyl-N-Propyl-3-Alkylimidazolium Tetrafluoroborate

Tribological and Mechanochemical Properties of Nanoparticle-Filled Polytetrafluoroethylene Composites under Different Loads

Investigation of Tribological Behavior of Al–Si Alloy Against Steel Lubricated with Ionic Liquids of 1-Diethylphosphonyl-n-propyl-3-alkylimidazolium Tetrafluoroborate

Tribological Properties of Cu-Sn Alloy Against Steel Under Lubrication of Phosphonium Ionic Liquids

Effect of the functional groups in ionic liquid molecules on the friction and wear behavior of aluminum alloy in lubricated aluminum-on-steel contact

Effect of Different Surface Microporous Structures on the Tribological Properties of TC4-Based Self-Lubricating Composites

Lubricity of Ionic Liquids Containing Phosphonate Functional Groups as Lubricants for Aluminum-on-Steel Contact

Comparing tribology properties of halogen-free ionic liquid, halogen-containing ionic liquid, and PAO 10 lubricants for steel–Al2024 friction contact at room temperature and high temperature

AFM Study on Superlubricity Between Ti6Al4V/Polymer Surfaces Achieved with Liposomes.

Tribological evaluation of α, ω´-diimidazoliumalkylene hexafluorophosphate ionic liquid and benzotriazole as additive

Enhanced tribological properties of sliding contacts through the synergistic effect of PTFE film and PSAIL 2280

Tribological Characterization of Several Silicon-Based Materials under Ionic-Liquids Lubrication

Regulation Mechanism of Special Functional Groups Contained in Polymer Molecular Chains on the Tribological Properties of Modified Ti6Al4V