Abstract:The unsteady characteristic in the tip region of an axial compressor has been numerically studied with the help of the dynamic mode decomposition analysis. The characteristics of frequency and dynamic modes are compared and discussed under different operating points and different parameters, such as tip clearance and rotating speeds. For the flowfield structures in the tip region, such as tip leakage flow, separation flow and shock wave, their relationships with the unsteadiness are studied in detail. Except for the unsteadiness caused by the interaction between rotating rotor and the stationary boundaries, it is found that the unsteadiness is attributed to the moving of the low-velocity cell. Based on the generation and the development of the low-velocity cell, the unsteady characteristics in tip region are divided into 4 types: BPF-dominated, shedding-dominated, self-induced and separation-dominated. When the tip leakage flow is weak, the unsteadiness in the tip region is only triggered by the blade sweeping. As the tip leakage flow gets stronger to a certain extent, the low-velocity cell is shed into the flow passage and mixed with the main-flow. When the main-flow is weaker under the low flowrate condition, the interaction between the low-velocity cell and the pressure side occurs and generates a new low-velocity cell near the leading-edge of the neighboring blade. The frequency of the new cell generation is actually the self-induced frequency. In the zero and small clearance model, the low-velocity is shed by the separation in the leading-edge and the casing-suction corner. By understanding these unsteady characteristics, the change tendency of the leading frequency in the rotor tip is easily explained and forecasted. Furthermore, under the transonic operation condition, the low-velocity cell is decelerated and eliminated by the shock wave in the unsteadiness of the self-induced type and the separation-dominated type, respectively. Thus, the leading frequency in the tip flow field is moderated.

Circumferential propagating characteristics of tip leakage flow oscillation and its induced rotating pressure wave

Numerical simulations on circumferential propagating characteristics of tip leakage flow oscillation in compressor

Circumferential propagation of tip leakage flow unsteadiness for a low-speed axial compressor

Numerical Investigations of Rotating Instability and Unsteady Tip Vortex Structures in an Axial Compressor

Investigation of tip leakage flow unsteadiness and rotating instability in a centrifugal compressor impeller

Tip leakage flow, tip aerodynamic loading and rotating instability in a subsonic high-speed axial flow compressor rotor

A Study on the Mechanism of Tip Leakage Flow Unsteadiness in an Isolated Compressor Rotor

Analysis on the Unsteady Flow Structures in the Tip Region of Axial Compressor

Casing Pressure Measurements and Numerical Simulations of a 1.5 Stage Axial Compressor: Tip Leakage Flow and Rotating Instability

Investigations of Rotating Instability and Fluctuating Tip Clearance Flow in a Low-Speed Axial Compressor

Circumferential mode characteristic of rotating instability and its decomposition method of compressor

Investigation of Rotating Instability Characteristics in an Axial Compressor with Different Tip Clearances

Investigation on the Unsteady Pressure Fluctuation Characteristic in the Blade Tip Seal of Steam Turbine Based on Spectrum

Effect of Tip Clearance on Non-Synchronous Propagating Flow Disturbances of Compressor Rotors under High Aerodynamic Loading Conditions

Lock-in effect of over-tip shock waves and identification of the escaping vortex-shedding mode in pressure-driven tip leakage flow

Numerical Analysis of Flow Structures in the Tip Region of a Transonic Centrifugal Impeller

Modal Analysis of Axial Compressor Tip Rotating Instability under Varying Operating Conditions

Experimental study on rotating instability mode characteristics of axial compressor tip flow

Pressure and Velocity Fluctuations Characteristics of the Tip Clearance Flow in an Axial Compressor Stage at the Near-Stall Condition

A New Approach to Suppress Tip Leakage Flow Utilizing Induced Shock Wave in Tip Region of a Transonic Compressor Rotor

Effect of tip clearance flow on pressure oscillation and vortex patterns of a high-speed centrifugal pump