Abstract:As the most widely used sealing component in hydrogen systems, rubber seals are affected by hydrogen over long-term service. Hydrogen molecules can dissolve into rubber materials and diffuse through the material. Studies have shown that adding fillers can enhance rubber's performance, improve its compatibility with hydrogen, and reduce the damage caused by hydrogen diffusion. Therefore, this study integrates experimental hydrogen permeation research with finite element modeling for nitrile butadiene rubber (NBR). The aim is to investigate the influence of filler properties on the microstructure, hydrogen permeation behavior, and hydrogen concentration distribution within NBR. Ultimately, the study elucidates the mechanisms governing hydrogen distribution evolution and permeation in NBR under hydrogen environments. The results indicate that the crosslink density of NBR filled with carbon black (NBR-CB) and silica (NBR-SC) is directly proportional to the filler content. NBR with higher filler content exhibits a lower hydrogen permeation coefficient and superior hydrogen barrier properties. In contrast to silica fillers, carbon black fillers demonstrate strong adsorption and a more pronounced barrier effect against hydrogen molecules, thereby enhancing the hydrogen barrier efficiency. The increase in carbon black's hydrogen solubility (from 2.2 x 10-4-4 to 16.9 x 10-4-4 cc(STP)& sdot;cm-3(polymer)& sdot;cmHg- & sdot; cm-3 (polymer) & sdot; cmHg- 1 ) effectively reduces the hydrogen permeation coefficient. In contrast, the rise in carbon black's hydrogen diffusion coefficient (from 0.1 x 10-6-6 to 4.1 x 10-6-6 cm2 & sdot;s-1) 2 & sdot; s-1 ) exacerbates the overall hydrogen permeation coefficient of NBR-CB, thereby intensifying the hydrogen permeation process.

Comparison of Two Methods for Measuring the Temperature Dependence of H2 Permeation Parameters in Nitrile Butadiene Rubber Polymer Composites Blended with Fillers: The Volumetric Analysis Method and the Differential Pressure Method

Multiphase Modeling of Pressure-Dependent Hydrogen Diffusivity in Fractal Porous Structures of Acrylonitrile Butadiene Rubber–Carbon Black Composites with Different Fillers

Hydrogen Permeation Behavior and Mechanisms in Nitrile Butadiene Rubber Composites for Hydrogen Sealing

Diffusion measurements of isopentane, hexene, cyclohexane in polyethylene particles

Diffusion measurements of isopentane, 1-hexene, cyclohexane in polyethylene particles by the intelligent gravimetric analyzer

Application of Three-Dimensional Solubility Parameter in Diffusion Behavior of Rubber-Solvent System and Its Predictive Power in Calculating the Key Parameters

Molecular simulations of gas transport in hydrogenated nitrile butadiene rubber

Correlations between H2 Permeation and Physical/Mechanical Properties in Ethylene Propylene Diene Monomer Polymers Blended with Carbon Black and Silica Fillers

Characterization of Filler-rubber Interaction, Filler Network Structure, and Their Effects on Viscoelasticity for Styrene-butadiene Rubber Filled with Different Fillers

Morphological investigations on silica and carbon-black filled acrylonitrile butadiene rubber for sealings used in high-pressure H 2 applications

Quantitative exploration of the swelling response for carbon black filled hydrogenated nitrile rubber with three-dimensional solubility parameters

Investigation of Mechanical Properties and Oil Resistance of Hydrogenated-Butadiene-Acrylonitrile-Rubber-Based Composites Across Various Temperatures

Study on ablative properties and mechanisms of hydrogenated nitrile butadiene rubber (HNBR) composites containing different fillers

Sorption and diffusion of acrylonitrile monomer through crosslinked nitrile rubber

Study on the Effect of Halloysite Nanotubes on the Mechanical Properties and Swelling Resistance of Ethylene-Propylene Diene Monomer (EPDM)/Nitrile Butadiene Rubber (NBR) Blend Nanocomposites

Research on Mechanical Properties, Compatibility, Flame Retardancy, Hot-Air Ageing Resistance of Hydrogenated Nitrile-Butadiene Rubber/Chloroprene Rubber Blends

Effect of different carbon fillers on the properties of nitrile rubber composites

Review of Developed Methods for Measuring Gas Uptake and Diffusivity in Polymers Enriched by Pure Gas under High Pressure

Investigating the Effect of Nano-Crystalline Cellulose in Nitrile Butadiene Rubber Matrix for Improved Thermo-Mechanical Properties

Energy Dissipation Accompanying Mullins Effect of Nitrile Butadiene Rubber/carbon Black Nanocomposites

Evaluation of molecular transport mechanism and interfacial interactions in doped ferrite rubber composites