Abstract:A strategy for optimizing the rolling resistance, wet skid and cut resistance of reinforced rubber simultaneously using a supramolecular filler is demonstrated. A β-alanine trimer-grafted Styrene Butadiene Rubber (A3-SBR) pristine polymer was designed and mechanically mixed with commercially available styrene butadiene rubber to help the dispersion of a β-alanine trimer (A3) supramolecular filler in the rubber matrix. To increase the miscibility of A3-SBR with other rubber components during mechanical mixing, the pristine polymer was saturated with ethanol before mixing. The mixture was vulcanized using a conventional rubber processing method. The morphology of the assembles of the A3 supramolecular filler in the rubber matrix was studied by Differential Scanning Calorimetry (DSC) and Transmission Electron Microscopy (TEM). The Differential Scanning Calorimetry study showed that the melting temperature of β-sheet crystals in the vulcanizates was around 179 °C and was broad. The melting temperature was similar to that of the pristine polymer, and the broad melting peak likely suggests that the size of the crystals is not uniform. The Transmission Electron Microscopy study revealed that after mixing the pristine polymer with SBR, some β-sheet crystals were rod-like with several tens of nanometers and some β-sheet crystals were particulate with low aspect ratios. Tensile testing with pre-cut specimens showed that the vulcanizate containing A3-SBR was more cut-resistant than the one that did not contain A3-SBR, especially at a large cut size. The rolling resistance and wet skid were predicted by dynamic mechanical analysis (DMA). DMA tests showed that the vulcanizates containing A3-SBR were significantly less hysteretic at 60 °C and more hysteretic at 0 °C based on loss factor. Overall, the "magic triangle" was expanded by optimizing the rolling resistance, wet-skid, and cut resistance simultaneously using a β-alanine trimer supramolecular filler. The Payne effect also became less severe after introducing the β-alanine trimer supramolecular filler into the system.

Application of Three-Dimensional Solubility Parameter in Diffusion Behavior of Rubber-Solvent System and Its Predictive Power in Calculating the Key Parameters

Quantitative exploration of the swelling response for carbon black filled hydrogenated nitrile rubber with three-dimensional solubility parameters

A Systematic Investigation of the Kinetic Models Applied to the Transport Behaviors of Aromatic Solvents in Unfilled Hydrogenated Nitrile Rubber/Ethylene Propylene Diene Monomer Composites

New Flory‐Huggins interaction parameter between SBR and p‐phenylenediamine antioxidants and the predictive power in molecular structure and rubber formula design

Swelling Behavior of Rubber in the Hydrocarbon Liquids

Prediction of Diffusion Coefficients in Polymer-Solvent Systems

A Group Contribution-Based Model to Predict Organic Solvent Diffusivities in Amorphous Rubbery Polymers

Linear Rheology of Natural Rubber Compounds Filled with Silica, Short Nylon Fiber or Both

A moving boundary approach of capturing diffusants penetration into rubber: FEM approximation and comparison with laboratory measurements

Diffusion Behavior of Organic Solvents in Graphene Oxide/Nano Silica Hybrid Natural Rubber Latex Nanocomposite: Experimental and Theoretical Approach

Predicting the glass transition temperature and solubility parameter between rubber/silica and rubber/resins via all‐atom molecular dynamics simulation

Systematic Investigation on the Swelling Response and Oil Resistance of NBR Using the Prediction Models Determined by the Modified Flory–Huggins Interaction Parameter

Estimation Of Solvent Diffusion Coefficient In Amorphous Polymers Using The Sanchez-Lacombe Equation-Of-State

Predicting the Glass Transition Temperature and Solubility Parameter Between Rubber/silica and Rubber/resins Via All-Atom Molecular Dynamics Simulation

Multiphase Modeling of Pressure-Dependent Hydrogen Diffusivity in Fractal Porous Structures of Acrylonitrile Butadiene Rubber–Carbon Black Composites with Different Fillers

A Modified Predicted Diffusion Coefficient Model for Polymer-Solvent Systems Using an Equation-of-State

Comparison of Two Methods for Measuring the Temperature Dependence of H2 Permeation Parameters in Nitrile Butadiene Rubber Polymer Composites Blended with Fillers: The Volumetric Analysis Method and the Differential Pressure Method

MATHEMATICAL MODEL FOR PREDICTION OF SOLVENT DIFFUSION IN AMORPHOUS GLASSY POLYMER

Understanding the Reinforcement and Dissipation of Natural Rubber Compounds Filled with Hybrid Filler Composed of Carbon Black and Silica

Prediction and Estimation of Solvent Diffusivities in Polyacrylate and Polymethacrylates

Expanding the "Magic Triangle" of Reinforced Rubber Using a Supramolecular Filler Strategy