Detritiation of the Organic Material in the MSO Process

Vojtěch Galek,Anna Sears,Petr Pražák,Lucie Karásková-Nenadálová

DOI: https://doi.org/10.1080/15361055.2024.2305996

2024-02-28

Fusion Science & Technology

Abstract:Tritium is a radioactive isotope of hydrogen, and due to its limited supply and related high price, it is necessary to recover it from tritiated materials via detritiation technologies. The number of tritiated materials arises during fusion. Tritium from fusion reactors is deposited in the outer layer of plasma-facing materials, which must be dealt with during maintenance or decommissioning processes. A second source of waste is laboratory equipment that could be contaminated with tritium. High-temperature treatment in an oxidation environment can achieve the release of tritium from metals or organic materials. The tritiated vapor is then captured in a series of water bubblers and reprocessed into pure T 2 . One of the high-temperature methods is molten salt oxidation (MSO), which uses high temperatures, alkaline salt, and an oxidative environment for flameless oxidation of different types of waste. This work aimed to simulate the detritiation processes of tritiated organic materials in MSO technology. First, a series of experiments with D 2 O absorbed in ion resins was conducted. The organic waste was decomposed within the molten salt, and the flue gas was measured to determine the oxidation efficiency. The D 2 O was captured in a series of water bubblers, and the water was then analyzed with attenuated total reflectance (ATR)–Fourier transform infrared spectroscopy (FTIR). The results showed that all deuterium in the form of D 2 O was caught in the first water bubbler. The capture efficiency ranged from 22.32% to 61.13%. The lower efficiency capture can be explained as D 2 O in water can form a HDO molecule and its correct determination is problematic. The second type of experiment was carried out with T 2 O with an activity of 851 Bq and with tritiated oil with an activity of 2495 Bq. The T 2 O was added to the set amount of ion resins and dosed into MSO. A peristaltic pump dosed the tritiated oil. The flue gas was measured to determine oxidation efficiency, and the T 2 O was captured within the water bubblers. The water was analyzed with liquid scintillation spectroscopy. The capture efficiency ranged between 76.42% to 97.87%. The results showed that this technology is suitable for the detritiation of tritiated organic materials.

nuclear science & technology

What problem does this paper attempt to address?

The paper aims to study the application of Molten Salt Oxidation (MSO) technology in the detritiation of organic materials. The main objectives include: 1. **Simulating the detritiation process of tritiated organic materials**: The detritiation process of different types of tritiated organic waste (such as ion exchange resins and tritiated oil) in MSO technology was simulated through experiments. 2. **Evaluating oxidation efficiency**: The exhaust gases produced during the experiments were measured to determine the oxidation efficiency, and the capture efficiency of deuterium (D2O) or tritium (T2O) in water bubbles was analyzed. 3. **Optimizing the MSO process**: The MSO process was optimized to improve detritiation efficiency by adjusting reaction conditions (such as air flow rate, dosage speed, etc.). Specifically, the paper conducted the following types of experiments: - Experiments using deuterated water (D2O) absorption in ion exchange resins to simulate the decomposition of solid organic waste; - Detritiation treatment of tritiated solid organic materials; - Detritiation treatment of tritiated liquid organic materials (such as oil). The research results indicate that under certain conditions, MSO technology can effectively remove tritium isotopes from organic materials. Particularly under optimized experimental conditions, the tritium capture efficiency can reach 97.87%. However, for some liquid tritiated organic materials, further optimization of the process is still needed to improve detritiation efficiency.

Detritiation of the Organic Material in the MSO Process

Effective desorption of tritium from diverse solid matrices and its application to routine analysis of decommissioning materials

Solid phase extraction of tritiated contaminants from tritium-containing waste oils

Removal of tritiated water molecules by isotope exchange reaction between H2O vapor and tritium water

The ozone-activated peroxymonosulfate process (O3/PMS) for removal of trace organic contaminants in natural and wastewater: Effect of the (in)organic matrix composition

Demonstration of Passive Tritium Oxidation Using a Hydrophobic Catalytic Recombiner for Detritiation System

The ozone-activated peroxymonosulfate process for the removal of a mixture of TrOCs with different ozone reactivity at environmentally relevant conditions: Technical performance, radical exposure and online monitoring by spectral surrogate parameters

The conversion of organic sulfur and strontium into inorganic compounds during the molten salt oxidation of mixed resin

Influence of the structure of a mineral adsorbent on the detritization of aqueous solutions

Molten salt oxidation: A versatile and promising technology for the destruction of organic-containing wastes

Degradation of the Mixed Organic Solvents of Tributyl Phosphate and N-Dodecane by Heterogeneous Fenton-like Oxidation Using Nanoscale Zero-Valent Iron As the Catalyst

Application of an ozone-activated peroxymonosulfate process to effectively degrade tetramethylammonium hydroxide (TMAH) in semiconductor wastewater

Oxidation of Tris (2-Chloroethyl) Phosphate in Aqueous Solution by Uv-Activated Peroxymonosulfate: Kinetics, Water Matrix Effects, Degradation Products and Reaction Pathways

Destruction of chlorinated organic solvents in a two-stage molten salt oxidation reactor system

Study on the destruction process of cationic exchange resins treated by Li2CO3-Na2CO3-K2CO3 molten salt

Molten salt oxidation of organic hazardous waste with high salt content

Effect of feeding amount on tail gas and waste salt obtained from molten salt oxidation process of cation exchange resins

Orbitrap mass spectrometry for the molecular characterization of water resource recovery from polluted surface water using membrane bioreactor

Generation and Distribution of Tritium in HTGRs and Review on the Tritiated Water Treatment Technologies

Technology Development for Isotope Rebalancing and Protium Removal in the EU-DEMO Fuel Cycle

Fenton oxidative degradation of spent organic solvents from nuclear fuel reprocessing plant