Abstract:Aluminum alloys are extensively used to manufacture mechanical components. However, when exposed to alkaline environments, like lubricants, refrigerants, or detergents, they can be corroded, reducing their durability. For this reason, the aim of this study is to investigate the influence of aggressive alkaline solutions (i.e., pH and presence of chlorides) on the corrosion resistance of three aluminum alloys (AA 5083-H111, AA 6082-T6, and AA 7075-T6) with and without anodizing treatments. Open circuit potential (EOCP) and anodic polarization measurements were carried out and typical corrosion parameters such as corrosion current density (icor) and corrosion rate (CR) were determined. Morphology of the corrosion attack and samples microstructure were investigated by scanning electron microscope. Results show that corrosion behavior of the three investigated alloys is influenced by (i) the aggressiveness of the testing environments; (ii) the thickness of the anodizing treatment; (iii) the alloy chemical composition; (iv) the distribution of intermetallic phases in the aluminum matrix. Moreover, three galvanic series have been built also testing other metallic alloys commonly used in mechanical applications, i.e., carbon steel (C40), stainless-steel (AISI 304), and Cu-based alloys (Cu-Ni alloy and CW 617 N, respectively). Results clearly indicate that galvanic series play a fundamental role when it is necessary to select an alloy for a specific environment, highlighting the thermodynamic conditions for corrosion occurrence. On the other hand, kinetic measurements and microstructural studies carried out on the three aluminum alloys stress the importance of the surface treatments and relevant thickness as well as the effect of metal exposure. Future work will involve the study of other surface treatments on aluminum alloys and the evaluation of their corrosion behavior in acidic environments.

Ocimum Basilicum Seeds as a New Natural Corrosion Inhibitor for AA7075-T6 Aluminum Alloy in Nacl Solution: Electrochemical, Thermodynamic, Surface, and Theoretical Studies

Berberine As an Effective Corrosion Inhibitor for 7075 Aluminium Alloy in 3.5% Nacl Solution

Anticorrosion properties of 5,5′-dithiobis-(2-nitrobenzoic acid) and sodium sulfite compounds for aluminum alloy 2024-T3 in saline solution: Electrochemical, characterization and theoretical investigations

Plant derived cationic dye as an effective corrosion inhibitor for 7075 aluminum alloy in 3.5% NaCl solution

Novel organoselenium-based N-mealanilic acids as efficacious corrosion inhibitors for 6061 aluminum alloy in molar HCl: In-silico modeling, electrochemical, and surface morphology studies

Azwain (trachyspermum Copticum) Seed Extract As an Efficient Corrosion Inhibitor for Aluminium in NaOH Solution

Ajuga orientalis L. Extract as a Green Corrosion Inhibitor of Aluminum in an Acidic Solution: An Experimental and DFT Study

Valorizing the potential of saffron petals extract for aluminium corrosion control: An integrated approach involving extraction, experimental and computational analysis

Corrosion inhibition of aluminum under basic conditions using Medicago sativa L. extract — thermodynamic studies

Impact of Aqueous Extract Artemisia Herba-Alba Leaves as a Green Inhibitor against Acid Activation of 2024 Aluminum Alloy

Synthesis and characterization of phenolphthalein derivatives, detailed theoretical DFT computation/molecular simulation, and prevention of AA2024-T3 corrosion in medium 3.5% NaCl

Detailedexperimental and computational explorations of two heterocyclic compounds as corrosion inhibitors for aluminum alloy 2024-T3 in 3.5% NaCl: Electrochemical/surface studies, DFT/MD modeling

Corrosion Behavior of Aluminum Alloys in Different Alkaline Environments: Effect of Alloying Elements and Anodization Treatments

The Corrosion Inhibition Effect on Fatigue Behavior for Aluminum Alloy 5052 in the Saline Environment

Synergistic Effect of an Organic Hydrophobic Film Deposited on MAO Containing NaH2PO4 for Enhanced Corrosion Resistance of 6063 Aluminum Alloy

Expired Drug Theophylline as Potential Corrosion Inhibitor for 7075 Aluminium Alloy in 1M NaOH Solution

Orange peel extracts as biodegradable corrosion inhibitor for magnesium alloy in NaCl solution: Experimental and theoretical studies

Effect of native air-formed oxidation on the corrosion behavior of AA 7075 aluminum alloys

Corrosion Inhibition of 3003 Aluminum Alloy in Molar Hydrochloric Acid Solution by Olive Oil Mill Liquid By-Product

Experimental and Theoretical Investigations of the Anti-Corrosion Film Derivated from Bio-Based Melatonin on AA5052 Aluminum Alloy Surface

Corrosion Inhibition of Ammonium Molybdate for AA6061 Alloy in NaCl Solution and Its Synergistic Effect with Calcium Gluconate