Abstract:A promising high-strength Fe – 17.7Mn – 4.7Cr – 0.48C – 10Ni – 5Al – 4Cu wt.% Austenitic steel was solutionized, then aged for 3 or 10 h at 580°C producing a pronounced precipitation hardening response primarily due to the formation nanoscale NiAl precipitates. Density functional theory (DFT), molecular dynamics (MD), and discrete dislocation dynamics (DDD) calculations were combined with microstructural data from atom-probe tomography (APT), informing theoretical strengthening models to predict yield strength at different stages of precipitation as a function of NiAl size, volume fraction, and composition. These yield strength predictions were compared with experimental microhardness measurements of the various ageing conditions, including the peak microhardness of 490 HV, which corresponds to an estimated alloy yield strength of 1200 MPa. Comparing MD calculations with theoretical models showed that anti-phase boundary (APB) formation was the predominant barrier to dislocation motion posed by the NiAl precipitates. Using single dislocation particle strengthening models with NiAl APB energies calculated from DFT, good agreement was observed between DDD calculations and the 10 h peak-aged experimental measurements, while agreement with the 3 h experimental measurements required reducing the NiAl APB energy. These results demonstrate the utility of the undertaken approach integrating simulations and experiments across multiple length-scales, particularly the presented coarse-grained DDD simulation method towards modeling materials strengthened by very fine precipitates. The results further suggest that the observed NiAl precipitates may adopt an alternate crystal structure early in their formation.

A Physically Based Mean Field Model for Strain‐Induced Precipitation and Recrystallization in High‐Strength Low‐Alloy Steels

Achieving High Strength and High Ductility in Nanostructured Metals: Experiment and Modelling

Microstructures-based Constitutive Analysis for Mechanical Properties of Gradient-Nanostructured 304 Stainless Steels

An improved cellular automaton model of dynamic recrystallization and the constitutive model coupled with dynamic recrystallization kinetics for microalloyed high strength steels

Dislocation Density-Based Model for Flow Behavior of a Near-α Titanium Alloy Considering Effects of Initial Lamellar Thickness

Modeling of Strain-Induced Precipitation Kinetics and Evolution of Austenite Grains in Nb Microalloyed Steels

Modelling of Microstructure Evolution During Hot Rolling of a High-Nb HSLA Steel

Machine learning-assisted constitutive modeling of a novel powder metallurgy superalloy

Modeling of the Microstructural Evolution and Mean Flow Stress during Thin Slab Casting/Direct Rolling of Niobium Microalloyed Steels

Predicting Yield Stress in a Nano-Precipitate Strengthened Austenitic Steel by Integrating Multi Length-Scale Simulations and Experiments

A Hierarchical Theoretical Model for Mechanical Properties of Lath Martensitic Steels

Prediction of grain refinement using multiscale crystal plasticity-integrated dislocation density-based model in multiphase steel alloys

Contribution of Interphase Precipitation on Yield Strength in Thermomechanically Simulated Ti–Nb and Ti–Nb–Mo Microalloyed Steels

An Analytical Model for the Kinetics of Strain-Induced Precipitation in Titanium Micro-Alloyed Steels

A Novel Approach to Model Static Recrystallization of Austenite During Hot Rolling of Nb Microalloyed Steel. Part I: Precipitate-Free Case

Analysing the Interaction between Microscopic Deformation, Microstructure and Void Evolution of Near-α Titanium Alloys during Non-Superplastic Hot Deformation by an Integrated Crystal Plasticity Finite Element Model

Interaction of Strain Refined Precipitates and Recrystallized Grains in Nb-Ti Microalloyed Steel during Continuous Casting, Hot-Core Heavy Reduction Rolling, and Reheating Process

Constitutive Modeling and Dynamic Recrystallization Mechanisms of an Ultralow-carbon Microalloyed Steel During Hot Compression Tests

Strain Rate Dependent Plasticity Model for Precipitate Hardened Aerospace Aluminum Alloy Produced with Solid-State Additive Manufacturing

The improved physically-mechanism constitutive model for a Ni-Mo-Cr-based superalloy with the pre-precipitation of μ phase in hot forming

Modeling of Dynamic Recrystallization Kinetics of a High Strength Low Alloy Steel During Hot Rolling