Abstract:Furfurylation is an effective and green method for wood or bamboo modification that can significantly improve its physical and mechanical properties and the resistance against biological deterioration and the attack of subterranean termites. To elucidate the effect of furfurylation on the physical and multiscale mechanical properties of bamboo, the conditions of the furfurylation process were modified to cause an independent variation of the physical and multiscale mechanical properties in differently-treated bamboo samples. This was achieved by impregnating bamboo samples with solutions containing 15%, 30%, 50%, or 70% furfuryl alcohol (FA) by either of the two impregnation processes, vacuum pressure (V-P) and soaking (S) impregnation, while applying different curing conditions (wet- or dry-curing). The physical properties we measured included the absorption rate, weight percent gain (WPG), swelling efficiency (SE), and anti-swelling efficiency (ASE); the macro-mechanical properties involved the modulus of rupture (MOR), the modulus of elasticity (MOE), parallel-to-grain compressive strength (CS), and tensile strength (TS); the micro-mechanical properties included the tensile strength of bamboo's vascular bundle and hardness and the indentation modulus of bamboo's fiber cell walls. Finally, the correlation between the different physical and mechanical properties of the modified bamboo samples was analyzed. The results indicate that V-P impregnation made bamboo more permissible for the penetration of FA, while wet-curing was more conducive to ensuring a high curing rate. The dimensional stability of the bamboo samples treated with a high FA concentration through V-P impregnation and of those furfurylated by the S-Wet process using either medium or high FA concentrations was significantly increased. However, the dimensional stability of the bamboo samples modified with either low or medium FA concentrations decreased in both dry and wet curing. In terms of mechanical strength, furfurylation had little effect on the macro- and micro-mechanical properties of bamboo and was slightly improved in comparison to untreated samples. The results also showed a positive correlation between the macro- and micro-mechanical strength of the modified bamboo samples and a significant negative correlation between the mechanical strength and ASE. In soaking impregnation, the WPG and ASE were positively correlated, while the WPG and CS were negatively correlated. Interestingly, the correlation between the mechanical properties and ASE was not significant. Finally, both V-P-Wet and S-Wet approaches can be recommended for bamboo furfurylation, the former being time-saving and having a high curing rate in FA resin while significantly improving the moisture absorption and mechanical strength of bamboo. The advantage of the latter process is simplicity, a high utilization rate of FA, and a significant improvement in the dimensional stability of bamboo.

Preparation of functional bamboo by combining nano-copper with hemicellulose and lignin under high voltage electric field (HVEF)

Cellulose Nanowhiskers from Moso Bamboo Residues: Extraction and Characterization

ZnCl2 Pretreatment of Bamboo Chips to Produce Chemi-Thermomechanical Pulp: Saving Refining Energy and Improving Pulp Properties

Preparation and Characterization of Nanofibrillated Cellulose from Bamboo Fiber Via Ultrasonication Assisted by Repulsive Effect

The Influence of Impregnation Methods and Curing Conditions on the Physical and Multiscale Mechanical Properties of Furfurylated Bamboo

Effect of Hydrothermal Pretreatment on the Properties of Moso Bamboo Particles Reinforced Polyvinyl Chloride Composites

Experiment on pretreatment of waste water from bamboo heat treatment by combination of iron-carbon micro-electrolysis and Fenton method

Strong, Durable, and Aging-Resistant Bamboo Composites Fabricated by Silver In Situ Impregnation

Enhanced durability of round bamboo treated with copper naphthenate under heat-cold impregnation

Facilitating the Fabrication of Diverse Bio-Based Nanomaterials from Bamboo Using One-Pot Hydrated Deep Eutectic Solvent Pretreatment

Mold Resistance of Bamboo after Laccase‐Catalyzed Fixation of Lignin Nanoparticles

Choline chloride-lactic acid deep eutectic solvent for delignification and nanocellulose production of moso bamboo

Structure and Physical Properties of Conductive Bamboo Fiber Bundle Fabricated by Magnetron Sputtering

Immobilization of Cu2+ enhances the anti-mould properties of bamboo by addition of ZnO nanoparticles

Lignin-polyurea/luffa seed oil microcapsules for anti-mold modification of bamboo

Surface property enhancement of bamboo by inorganic materials coating with extended functional applications

Sustainable route to prepare functional lignin-containing cellulose nanofibrils

Anti-mildew effect and inhibition mechanism of the slightly acidic electrolyzed water treatment of bamboo

Gentle fabrication of colorful superhydrophobic bamboo based on metal-organic framework

Fine Chemicals Prepared by Bamboo Lignin Degradation through Electrocatalytic Redox between Cu Cathode and Pb/PbO2 Anode in Alkali Solution

Effect of growing CNTs onto bamboo charcoals on adsorption of copper ions in aqueous solution