Abstract:A facile, green and economical method for the high-efficiency utilization and functionalization of bamboo fiber could significantly improve the development of biomass industries. Here, we demonstrated a deep eutectic solvent, which formed from choline chloride (ChCl) and lactic acid (LC), as pretreating agent to delignify moso bamboo (<em class="EmphasisTypeItalic">Phyllostachys pubescens</em>) and produce nanocellulose. The results showed that most of the lignin was efficiently removed (94.39%) and 91% of the cellulose was recovered after the moso bamboo was pretreated with ChCl–LC at 120 °C for 3 h with a solid-to-liquid ratio of 1:25. Furthermore, nanofibers with widths of 20–80 nm were successfully prepared from pretreated fibers after a simple mechanical process. SEM and AFM images showed that they have excellent aspect ratio. In addition, the obtained nanofibers could be used to fabricate strong films which feature a high tensile strength ranged from 163 to 213 MPa.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to develop an efficient, green and economical method to utilize and functionalize bamboo fibers, especially Phyllostachys pubescens. Specifically, the research aims to use a deep eutectic solvent (DES) composed of choline chloride (ChCl) and lactic acid (LC) as a pretreatment agent to remove lignin from Phyllostachys pubescens and produce nanocellulose. Through this method, the development of the biomass industry can be significantly promoted, especially in the efficient utilization of Phyllostachys pubescens. The paper mentions that although traditional pretreatment methods are effective, they have problems such as environmental pollution, poor biodegradability and high production costs, which limit their industrial applications. Therefore, developing new, green and inexpensive solvents as pretreatment agents has become an important current topic. The ChCl - LC - based DES pretreatment method proposed in this paper can not only efficiently remove lignin, but also maintain a high cellulose recovery rate, and successfully prepare nanofibers with an excellent aspect ratio. These nanofibers can be used to manufacture high - strength films, showing a high tensile strength ranging from 163 to 213 MPa. In summary, this paper mainly solves the following problems: 1. **Efficient lignin removal**: Through ChCl - LC DES pretreatment, the lignin removal rate in Phyllostachys pubescens reached 94.39%. 2. **High cellulose recovery rate**: After pretreatment, the cellulose recovery rate exceeds 91%. 3. **Preparation of nanofibers**: Nanofibers with a width of 20 - 80 nm were successfully prepared from the pretreated fibers. 4. **Environment - friendly**: This method avoids the environmental pollution problems caused by traditional methods and reduces the cost of liquid waste treatment. 5. **High - value - added products**: The prepared nanofibers can be used to manufacture high - strength films and have potential high - value application prospects. These achievements not only contribute to the high - value utilization of Phyllostachys pubescens, but also provide new ideas and technical support for the sustainable development of the biomass industry.

Choline chloride-lactic acid deep eutectic solvent for delignification and nanocellulose production of moso bamboo

Cellulose Nanowhiskers from Moso Bamboo Residues: Extraction and Characterization

Promoting the Disassemble and Enzymatic Saccharification of Bamboo Shoot Shells Via Efficient Hydrated Alkaline Deep Eutectic Solvent Pretreatment

Effect of deep eutectic solvent pretreatment on the structure and physicochemical properties of lignin from bamboo shoot shell

Efficient extraction of lignin from moso bamboo by microwave-assisted ternary deep eutectic solvent pretreatment for enhanced enzymatic hydrolysis

Efficient preparation of high-purity cellulose from moso bamboo by p-toluenesulfonic acid pretreatment

Facilitating the Fabrication of Diverse Bio-Based Nanomaterials from Bamboo Using One-Pot Hydrated Deep Eutectic Solvent Pretreatment

Metal Salt-Based Deep Eutectic Solvent Pretreatment of Moso Bamboo to Improve Enzymatic Hydrolysis

Biphasic 2-methyltetrahydrofuran/oxalic acid/water pretreatment to enhance cellulose enzymatic hydrolysis and lignin valorization.

Extraction of High-Quality Moso Bamboo Fibers by Enzyme/alkali Synergistic Mechanism

Ultrasonic Nanofibrillation of Bamboo Cellulose Fibers Enhanced by Pretreatment Using DMAc/LiCl

Efficient Delignification of Sugarcane Bagasse by Fenton Oxidation Coupled with Ultrasound-Assisted NaOH for Biotransformation from Agaricus Sinodeliciosus Var. Chaidam

Natural arginine-based deep eutectic solvents for rapid microwave-assisted pretreatment on crystalline bamboo cellulose with boosting enzymatic conversion performance

Integrating Benzenesulfonic Acid Pretreatment and Bio-Based Lignin-Shielding Agent for Robust Enzymatic Conversion of Cellulose in Bamboo

Unlocking full potential of bamboo waster: Efficient co-production of xylooligosaccharides, lignin, and glucose through low-dosage mandelic acid hydrolysis with alkaline processing

Efficient fractionation of bamboo residue by autohydrolysis and deep eutectic solvents pretreatment

Choline chloride - oxalic acid dihydrate deep eutectic solvent pretreatment of Barley straw for production of cellulose nanofibers

Effects of Different Delignification and Drying Methods on Fiber Properties of Moso Bamboo

Direct Carboxymethylation of Cellulose Fibers by Ternary Reactive Deep Eutectic Solvents for the Preparation of High-Yield Cellulose Nanofibrils

Biphasic lignocellulose fractionation for staged production of cellulose nanofibers and reactive lignin nanospheres: A comparative study on their microstructures and effects as chitosan film reinforcing

Coproduction of Furfural, Phenolated Lignin and Fermentable Sugars from Bamboo with One-Pot Fractionation Using Phenol-Acidic 1,4-Dioxane