High-Performance Bamboo Steel Derived from Natural Bamboo
You-Yong Wang,Xiang-Qian Wang,Yuan-Qing Li,Pei Huang,Bo Yang,Ning Hu,Shao-Yun Fu
DOI: https://doi.org/10.1021/acsami.0c18239
2020-12-23
Abstract:It is highly desirable to develop green and renewable structural materials from biomaterials to replace synthetic materials involved from civil engineering to aerospace industries. Herein, we put forward a facile but effective top–down strategy to convert natural bamboo into bamboo steel. The fabrication process of bamboo steel involves the removal of lignin and hemicellulose, freeze-drying followed by epoxy infiltration, and densification combined with in situ solidification. The prepared bamboo steel is a super-strong composite material with a high specific tensile strength (302 MPa g<sup>–1</sup> cm<sup>3</sup>), which is higher than that (227 MPa g<sup>–1</sup> cm<sup>3</sup>) of conventional high specific strength steel. The bamboo steel demonstrates a high tensile strength of 407.6 MPa, a record flexural strength of 513.8 MPa, and a high toughness of 14.08 MJ/m<sup>3</sup>, which is improved by 360, 290, and 380% over those of natural bamboo, respectively. Particularly, the mechanical properties of the bamboo steel are the highest among the biofiber-reinforced polymer composites reported previously. The well-preserved bamboo scaffolds assure the integrity of bamboo fibers, while the densification under high pressure results in a high-fiber volume fraction with an improved hydrogen bonding among the adjacent bamboo fibers, and the epoxy resin impregnated enhances the stress transfer because of its chemical crosslinking with cellulose molecules. These endow the bamboo steel with superior mechanical performance. Furthermore, the bamboo steel demonstrates an excellent thermal insulating capability with a low thermal conductivity (about 0.29 W/mK). In addition, the bamboo steel shows a low coefficient of thermal expansion (about 6.3 × 10<sup>–6</sup> K<sup>–1</sup>) and a very high-dimensional stability to moisture attack. The strategy of fabricating high-performance bamboo steel with green and abundant natural bamboo as raw materials is highly attractive for the sustainable development of structural engineering materials.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c18239?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c18239</a>.Fabrication process of densified delignified bamboo and bamboo steel, photograph and SEM images of the vascular bundles and parenchyma cells of natural bamboo, color change during the delignification process, color recovery of bamboo scaffolds after delignification and bleaching, photograph and SEM images of delignified bamboo, FTIR spectra of the uncured epoxy and cured epoxy, photograph of bamboo steel and nanoscale alignment of cellulose nanofibers, SEM images of densified natural bamboo, logarithm of the CVF<sub><i>D</i></sub> versus the logarithm of the length of the delignified bamboo fiber, tensile stress–strain curves of bamboo steel derived from three parts of bamboo, tensile stress–strain curves of bamboo steel in the transverse direction, crack growth of bamboo steel under the bending load, photographs of the bending and recovery process of natural bamboo and bamboo steel, weight loss in the delignification process and the weight gain in the epoxy infiltration process, bamboo fiber CVF<sub><i>D</i></sub> and tensile strength at various fiber lengths, and tensile strength of bamboo steel at various lengths (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c18239/suppl_file/am0c18239_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.
materials science, multidisciplinary,nanoscience & nanotechnology