Abstract:Superhydrophobic surfaces are imperative in flexible polymer foams for diverse applications; however, traditional surface coatings on soft skeletons are often fragile and can hardly endure severe deformation, making them unstable and highly susceptible to cyclic loadings. Therefore, it remains a great challenge to balance their mutual exclusiveness of mechanical robustness and surface water repellency on flexible substrates. Herein, we describe how robust superhydrophobic surfaces on soft poly(dimethylsiloxane) (PDMS) foams can be achieved using an extremely simple, ultrafast, and environmentally friendly flame scanning strategy. The ultrafast flame treatment (1–3 s) of PDMS foams produces microwavy and nanosilica rough structures bonded on the soft skeletons, forming robust superhydrophobic surfaces (i.e., water contact angles (WCAs) > 155° and water sliding angles (WSAs) < 5°). The rough surface can be effectively tailored by simply altering the flame scanning speed (2.5–15.0 cm/s) to adjust the thermal pyrolysis of the PDMS molecules. The optimized surfaces display reliable mechanical robustness and excellent water repellency even after 100 cycles of compression of 60% strain, stretching of 100% strain, and bending of 90° and hostile environmental conditions (including acid/salt/alkali conditions, high/low temperatures, UV aging, and harsh cyclic abrasion). Moreover, such flame-induced superhydrophobic surfaces are easily peeled off from ice and can be healable even after severe abrasion cycles. Clearly, the flame scanning strategy provides a facile and versatile approach for fabricating mechanically robust and surface superhydrophobic PDMS foam materials for applications in complex conditions.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c03272?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c03272</a>.Water repellency of SiRF samples with the FIR-treated left-half surface and the untreated right-half surface (Movie S1) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c03272/suppl_file/am1c03272_si_001.mp4">MP4</a>)Flame scanning treatment on a SiRF material and its surface temperature (Movie S2) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c03272/suppl_file/am1c03272_si_002.mp4">MP4</a>)Surface structure stability of SiRF samples after 500 °C for 10 s (Movie S3) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c03272/suppl_file/am1c03272_si_003.mp4">MP4</a>)Surface structure stability of SiRF samples flame scanning (∼1300 °C) treatment (Movie S4) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c03272/suppl_file/am1c03272_si_004.mp4">MP4</a>)Comparison of surface hydrophobicity of pure SiRF and SiRF-FT-3s samples after exposure on a water surface (Movie S5) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c03272/suppl_file/am1c03272_si_005.mp4">MP4</a>)Surface water self-sliding phenomenon of SiRF-FT-3s samples for various aqueous solutions (Movie S6) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c03272/suppl_file/am1c03272_si_006.mp4">MP4</a>)Sandpaper abrasion test of the SiRF-FT-3s sample (Movie S7) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c03272/suppl_file/am1c03272_si_007.mp4">MP4</a>)Water repellency of SiRF samples with FIR-treated left-half surface and the untreated right-half surface (Figure S1); photographs of WCA measurements of pure SiRF and SiRF-FT-3s and the water sliding behavior of SiRF-FT-3s at a sloping angle of ∼3° (Figure S2); XPS Si 2p spectra of pure SiRF, SiRF-FT-1s, SiRF-FT-3s, and SiRF-FT-6s after ultrafast flame scanning (Figure S3); Si 2p XPS results of various SiRF-FT samples and FTIR results of SiRF samples under 500 °C treatment for different treatment times (Figure S4); SEM images of the surface morphology of the control SiRF sample (Figure S5); SEM images of the surface morphology of the SiRF-FT-3s sample observed at different positions (Figure S6); schematic diagram of surface transition from the hydrophobic to the superhydrophobic state (Figure S7); SEM images of the surface morphology of the SiRF-FT-6s sample (Figure S8); surface structure stability of SiRF samples after 500 °C for 10 s and FIP treatment (Figure S9); comparison of surface hydrophobicity of pure SiRF and SiRF-FT-3s samples after exposure on a water surface (Figure S10); solvent/water separation process and continuous collection of SiRF-FT-3s samples for floating xylene on water and heavy CH<sub>2</sub>Cl<sub>2</sub> in water (Figure S11); demonstration cyclic abrasion process on the SiRF-FT-3s sample and surface water repellency (Figure S12); and typical SEM images of SiRF-FT-6s samples before and after the second flame scanning treatment (Figure S13) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c03272/suppl_file/am1c03272_si_008.pdf">PDF</a>)This article has not yet been cited by other publications.

Flame‐impingement‐induced superhydrophilicity of soda‐lime‐silica glass surface

Formation of AlOOH and Silica Composite Hierarchical Nanostructures Thin Film by Sol–gel Dip-Coating for Superhydrophobic Surface with High Adhesion Force

Heat Induced Superhydrophilic Glass Surface

Atmosphere-Mediated Superhydrophobicity of Rationally Designed Micro/Nanostructured Surfaces

High‐throughput laser‐based surface functionalization for fabrication of superhydrophobic soda‐lime glass

Fabrication of a Scratch & Heat Resistant Superhydrophobic SiO2 Surface with Self-Cleaning and Semi-Transparent Performance

One-Step Hydrothermal Creation of Hierarchical Microstructures Toward Superhydrophilic and Superhydrophobic Surfaces

Fabricating Superhydrophobic and Oleophobic Surface with Silica Nanoparticles Modified by Silanes and Environment-Friendly Fluorinated Chemicals

Enhancing glass surface hydrophobicity: the role of Perfluorooctyltriethoxysilane in advanced surface modification

Ultrafast Flame-Induced Pyrolysis of Poly(dimethylsiloxane) Foam Materials toward Exceptional Superhydrophobic Surfaces and Reliable Mechanical Robustness

Utilization of sodium silica from coal fly ash and trimethylchlorosilane as self-cleaning coating on glass

Preparation of transparent and robust superhydrophobic surfaces for self-cleaning applications

Preparation of high transparent hydrophobic glass surface and its self-cleaning property

Transparent Superhydrophobic and Self-Cleaning Coating

Study of surface wettability on fused silica by ultrafast laser-induced micro/nano-surface structures

Sustainable Manufacturing of Multifunctional Fluorine-Free Superslippery Flexible Surfaces

Nanoscale Analysis of Surface Modifications on Silanized Glass: Wettability Alteration and Long-Term Stability

Heat‐resistant Superamphiphobic Robust Surface by Self‐assembled Monolayer Surface Reaction

Superhydrophobic Optically Transparent Silica Films Formed with a Eutectic Liquid

Transparent, Superhydrophobic Surface with Varied Surface Tension Responsiveness in Wettability Based on Tunable Porous Silica Structure for Gauging Liquid Surface Tension.

Azeotropic Binary Solvent System Containing Nonfluorinated Polymer-Grafted Silica Nanoparticles for the Fabrication of a Superhydrophobic Surface