Abstract:The adsorption is widely used to remove certain classes of pollutants from water, especially those that are hardly biodegradable and dyes represent one of these problematic groups. The removal of bromothymol blue (BTB) from wastewater using TiO 2 was studied in batch system. The adsorbent TiO 2 has a specific surface area of 400 m 2 /g, a mean crystallites sizes (5–10 nm), and pH pzc equal to 6.5. TiO 2 is stable over the whole pH range and constitutes a good compromise between efficiency and stability (in both acidic and basic media), therefore, the use of other additives is not necessary. Its non-toxicity and low energy required for its activation ( E ~ 3 eV) as well as its low cost for most of the applications envisaged make it advantageous. The influence of effective variables such as solution pH (1–10), contact time (0–60 min), initial BTB concentration (5–40 mg/l), adsorbent dose of TiO 2 (0.2–2 g/l), and temperature (20–60 °C) on the adsorption efficiency was examined, while the BTB content was determined by UV–Vis spectrophotometry. The optimal pH, adsorbent dose, and contact time for the efficient removal were found to be 10, 0.2 g/l, and 30 min, respectively, and the adsorbent was characterized by the BET analysis and point of zero charge (pH pzc ). Among the different kinetic models, the experimental data of the BTB removal are well fitted with the pseudo-first-order kinetic model with a high determination coefficient. The evaluation of the fitness of equilibrium data by various conventional isotherm models, based on the R 2 value as criterion, show the successful applicability of the Langmuir model for the interpretation of experimental data with a maximum adsorption capacity ( q max ) of 27.02 mg/g at 20 °C and R 2 of 0.997. The adsorption isotherms at different temperatures have been used for the determination of the free energy (Δ G o = 2.1808 to—1.0981 kJ/mol), enthalpy (Δ H o = 20.74 kJ/mol), and entropy (Δ S o = 65.58 J/mol/K) indicate that the overall adsorption is spontaneous and endothermic in nature.

Effect of calcination temperature of titanium dioxide (TiO2) on adsorption performance of doxycycline hydrochloride

Influence Of Crystallization Of Nano Tio2 Prepared By Adsorption Phase Synthesis On Photodegradation Of Gaseous Toluene

Effect of Calcination Temperature on Crystal Structure and Photocatalytic Prop- Erty of TiO2/Diatomite Nanoparticles

Effect of Calcination Temperature on the Catalytic Activity of Nanosized TiO2 for Ozonation of Trace 4-Chloronitrobenzene

Adsorption of Doxycycline on Attapulgite

Preparation and Properties of TiO2/illite Composites Synthesized at Different Hydrothermal Ph Values

Influence of Drying and Calcination on Remaining Amount and Immobile Character of Titanium on Titanium‐pillared Montmorillonite

Effects of TiO2 Nanoparticles Synthesized via Microwave Assistance on Adsorption and Photocatalytic Degradation of Ciprofloxacin

Synergistic Effect of N Doping and Oxygen Vacancies over TiO2 Nanosheets with Enhanced Photocatalytic Removal of Tetracycline

Indium oxide/Halloysite composite as highly efficient adsorbent for tetracycline Removal: Key roles of hydroxyl groups and interfacial interaction

Hydrothermally regulating phase composition of TiO2 nanocrystals toward high photocatalytic activity

TiO 2 embedded in AC-COFs/SiO 2 composites with core-shell structure for improved photocatalytic degradation performance of tetracycline

Synergistic effect of N doping and oxygen vacancies over TiO 2 nanosheets with enhanced photocatalytic removal of tetracycline

Effect of calcination temperature on the structure and properties of SiO2 microspheres/nano-TiO2 composites

Effect of Calcination Temperature on Surface Acidity and Photocatalytic Activity of Nano-TiO2/Diatomite Composite Photocatalyst

Photocatalytic activities of Ion doped TiO2 thin films when prepared on different substrates

TiO 2 –graphene sponge for the removal of tetracycline

Performance and mechanism of antibacterial activity and organic dyes degradation of WO3/TiO2/(Ca,Y)F2:Tm,Yb loaded on Bio-CaCO3

Adsorption performance and optimization by response surface methodology on tetracycline using Fe-doped ZIF-8-loaded multi-walled carbon nanotubes

Potential of Titanium Dioxide to Remove Bromothymol Blue (BTB) in Aqueous Solution by Batch Mode Adsorption–Kinetic, Isotherm and Thermodynamic Studies

Equilibrium, kinetic and mechanism studies on adsorption of textile disperse dye from aqueous solution onto TiO2 in the presence of ultrasound and rare earth ions