Abstract:Antibiotic-related environmental contamination directly threatens ecosystems and human health. Adsorption is an efficient and simple treatment process for removing antibiotics from water environments. Attapulgite (ATP) is a natural clay mineral extensively researched as a promising adsorbent material in the food industry, pharmaceutical sanitation, and organic wastewater treatment. Graphene oxide (GO) is widely employed in the treatment of organic wastewater due to its superior physicochemical properties. Here, using high temperature and HCl, ATP was activated (a-ATP), and a GO/a-ATP composite was prepared via hydrothermal synthesis. Using an adsorbent dosage of 0.75 g L −1 , pH = 5, reaction time of 120 min, initial temperature = 35 °C, and initial TC concentration of 50 mg L −1 , the adsorption capacity of GO/a-ATP for TC was 38.8 mg g −1 . The pseudo-first-order model (PFO) and pseudo-second-order (PSO) model were fitted to the kinetic data, and yielded an R 2 -value of PSO (0.99991) > PFO (0.9389), indicating that the adsorption process is related to chemisorption. Adsorption was also well described by the mixed-order (MO) model ( R 2 = 0.9827), demonstrating that two rate-limiting adsorption reaction steps, diffusion and adsorption, occur; the former exerting greater influence. Equilibrium data was fitted to Langmuir, Freundlich, and Temkin isotherm models; the Langmuir model gave the best fit, suggesting the adsorption process is a homogeneous and monolayer adsorption process. Various thermodynamic parameters such as standard Gibbs free energy (Δ G 0 ) and standard enthalpy (Δ H 0 ) were also calculated, these results indicate the adsorption reaction is an endothermic process. Our study shows that GO/a-ATP is a promising adsorbent material for use in the adsorption of tetracycline in aquatic environments.

Adsorption of Doxycycline on Attapulgite

Adsorption of Antibiotics in Aqueous Solution with Modified Attapulgite

Effect of calcination temperature of titanium dioxide (TiO2) on adsorption performance of doxycycline hydrochloride

Comparison and discussion on the adsorption capacity of several compounds with layered structure

Adsorption of the Total Organic Acid by Attapulgit

ADSORPTION OF 3,4-DICHLOROANILINE ONTO ATTAPULGITE CLAY

Selective adsorption of Pb2+ and Cu2+ on amino-modified attapulgite: Kinetic, thermal dynamic and DFT studies

Adsorption Performances for Aqueous Cu(II) onto Chelating Resin Dowex M-4195: Interaction Mechanism Investigation

Adsorption Properties and Mechanism of Attapulgite to Graphene Oxide in Aqueous Solution

Adsorption Of Anionic Dye By Magnesium Hydroxide-Modified Diatomite

A comparative study of Cd(II) adsorption on calcined raw attapulgite and calcined aluminium hydroxide-modified attapulgites in aqueous solution

Adsorption Mechanisms of Purified Attapulgite for Zn2+ in Aqueous Solution

Preparation and adsorption of Cd2+ of attapulgite modified by AMPS

Kinetic Study and Equilibrium Isotherm Analysis of Cationic Dye Adsorption Onto Attapulgite and Rectorite

Effects of Different Treatments on the Structure and Characteristic of Attapulgite Clay

Removal of fluoride ions from aqueous solution using modified attapulgite as adsorbent.

Performance comparison of Mg-loaded amphoteric clays in antibiotics adsorption from aqueous solutions

Zwitterionic MOF-embedded alginate beads with polydopamine surface functionalization for efficient doxycycline removal: Optimization and mechanistic study

Adsorption performance of GO-doped activated ATP composites towards tetracycline

Tetracycline adsorption on kaolinite: pH, metal cations and humic acid effects

Insights into Tetracycline Adsorption Onto Kaolinite and Montmorillonite: Experiments and Modeling