Abstract:To obtain cheap and environmentally friendly adsorbents, an attapulgite hydroxyapatite composite (HAA) was prepared via a co-precipitation method with attapulgite as the matrix. Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM) were used for material characterization. The isothermal, thermodynamics, factors experiments (pH, anions), kinetics, and competitive adsorption were studied. The formation of Ca (II) and rate equation were used to explain the mechanism of adsorption and mechanism of anionic action. The data showed that the adsorption was well described by the Langmuir model and quasi-second-order kinetics model. Thermodynamic parameters (ΔH0 > 0, ΔS0 > 0, ΔG0 < −20 kJ/mol) suggested that the adsorption was an endothermic chemical adsorption process. Further analysis of the mechanism showed that ion exchange also contributed to the removal of Cd (II). Studies found that pH values <5 caused partial dissolution of HAA and high temperature was conducive to rapid adsorption. The F− and SO42− promoted adsorption by the precipitate with Ca (II), and Cl− hindered adsorption by complexation with Cd (II). The adsorption capacity of HAA was 3.70, 1.99, 1.17, 0.98 mmol/g for Pb (II), Cu (II), Cd (II), and Zn (II), respectively, indicated that HAA may be promising for composite materials to remove heavy metals from water.Hydroxyapatite attapulgite composites were prepared by a co-precipitation method. The SBET of Synthetic compounds was is 4- and 9-fold that of HA and A, respectively. What’s more, HAA removal efficiency and adsorption capacity that is significantly higher than A and HA under identical conditions. The study found that ion exchange and chemisorptions can explain the remove mechanism. But ion exchange with Ca (II) is the main factor. The F- and SO42- promoted adsorption by the precipitate with Ca (II) and rate equation were used to explain the mechanism of anionic action.

Selective adsorption of Pb2+ and Cu2+ on amino-modified attapulgite: Kinetic, thermal dynamic and DFT studies

Preparation and Characterization of Mercapto-Functionalized Calcined Attapulgite and Its Removal of Pb (II) and Cd (II) Solution

Preparation and adsorption of Cd2+ of attapulgite modified by AMPS

Removal of Cd(II) and Pb(II) from aqueous solution by modified attapulgite clay

Removal of mercury ion from aqueous solutions by chemical modified attapulgite

The adsorption property investigation of tetraethylenepentamine functionalized nano-Fe3O4 polymer adsorbents on Cu(II) from wastewater

A comparative study of Cd(II) adsorption on calcined raw attapulgite and calcined aluminium hydroxide-modified attapulgites in aqueous solution

Cd(II) adsorption from aqueous solutions using modified attapulgite

Cd complexation with mercapto-functionalized attapulgite (MATP): Adsorption and DFT study

Fast Removal of Hg(Ii) Ions from Aqueous Solution by Amine-Modified Attapulgite

Adsorption of copper on iminodisuccinic acid modified attapulgite: characterization and mechanism

Adsorption Performances for Aqueous Cu(II) onto Chelating Resin Dowex M-4195: Interaction Mechanism Investigation

Adsorption of Pb(II) in water by modified chitosan-based microspheres and the study of mechanism

Adsorption of Pb (II) from Aqueous Solution by Modified Bentonite

Adsorption of arsenic on iron modified attapulgite (Fe/ATP): surface complexation model and DFT studies

Adsorption Mechanisms of Purified Attapulgite for Zn2+ in Aqueous Solution

Synthesis and Characterization of Amino-Grafted Attapulgite/graphene Oxide Nanocomposites and Their Adsorption for Pb(II) Removal

The dynamics and adsorption of Cd (II) onto hydroxyapatite attapulgite composites from aqueous solution

Preparation of EDTA-modified Magnetic Attapulgite Chitosan Gel Bead Adsorbent for the Removal of Cu(II), Pb(II), and Ni(II).

Functionalized Attapulgite for the Adsorption of Methylene Blue: Synthesis, Characterization, and Adsorption Mechanism