Highly selective electroreduction of nitrate to ammonia on a Ru-doped tetragonal Co 2 P monolayer with low-limiting overpotential

Jie Wu,Yang-Xin Yu

DOI: https://doi.org/10.1039/d1cy01217g

2021-01-01

Abstract:A Ru-doped Co 2 P monolayer is constructed to modulate the d-band center close to the value at the volcano top and its limiting potential is −0.38 V, exhibiting excellent activity as well as selectivity.

chemistry, physical

What problem does this paper attempt to address?

Highly Selective Electroreduction of Nitrate to Ammonia on a Ru-doped Tetragonal Co2P Monolayer with Low-Limiting Overpotential

Jie Wu,Yang-Xin Yu

DOI: https://doi.org/10.1039/d1cy01217g

IF: 6.177

2021-01-01

Catalysis Science & Technology

Abstract:A Ru-doped Co2P monolayer is constructed to modulate the d-band center close to the value at the volcano top and its limiting potential is −0.38 V, exhibiting excellent activity as well as selectivity.
Gradient-concentration RuCo Electrocatalyst for Efficient and Stable Electroreduction of Nitrate into Ammonia

Xinhong Chen,Yumeng Cheng,Bo Zhang,Jia Zhou,Sisi He

DOI: https://doi.org/10.1038/s41467-024-50670-w

IF: 16.6

2024-01-01

Nature Communications

Abstract:Electrocatalytic nitrate reduction to ammonia holds great promise for developing green technologies for electrochemical ammonia energy conversion and storage. Considering that real nitrate resources often exhibit low concentrations, it is challenging to achieve high activity in low-concentration nitrate solutions due to the competing reaction of the hydrogen evolution reaction, let alone considering the catalyst lifetime. Herein, we present a high nitrate reduction performance electrocatalyst based on a Co nanosheet structure with a gradient dispersion of Ru, which yields a high NH3 Faraday efficiency of over 93% at an industrially relevant NH3 current density of 1.0 A/cm2 in 2000 ppm NO3- electrolyte, while maintaining good stability for 720 h under -300 mA/cm2. The electrocatalyst maintains high activity even in 62 ppm NO3- electrolyte. Electrochemical studies, density functional theory, electrochemical in situ Raman, and Fourier-transformed infrared spectroscopy confirm that the gradient concentration design of the catalyst reduces the reaction energy barrier to improve its activity and suppresses the catalyst evolution caused by the expansion of the Co lattice to enhance its stability. The gradient-driven design in this work provides a direction for improving the performance of electrocatalytic nitrate reduction to ammonia. Achieving stable and high-activity nitrate electroreduction to ammonia in low concentrations nitrate is critical but challenging. Here, the authors present a Co-based electrocatalyst with gradient-doped Ru atoms, showing a continuous ammonia production at -1000 mA/cm2 in 2000 ppm nitrate electrolyte.
Ru‐Induced Defect Engineering in Co3O4 Lattice for High Performance Electrochemical Reduction of Nitrate to Ammonium

Maggie Lim,Zhipeng Ma,George O'Connell,Jodie A Yuwono,Priyank Kumar,Rouhollah Jalili,Rose Amal,Rahman Daiyan,Emma C Lovell,Jodie A. Yuwono,Emma C. Lovell

DOI: https://doi.org/10.1002/smll.202401333

IF: 13.3

2024-04-13

Small

Abstract:This work investigates defect engineering for nitrate reduction to ammonia. Here, flame spray pyrolysis for the integration of Ru into the Co3O4 lattice, coupled with electroreduction conditioning treatment is utilized. This controlled defecting approach results in increased NH4+ production at 10 at.% Ru loading. Amidst these growing sustainability concerns, producing NH4+ via electrochemical NO3− reduction reaction (NO3RR) emerges as a promising alternative to the conventional Haber‐Bosch process. In a pioneering approach, this study introduces Ru incorporation into Co3O4 lattices at the nanoscale and further couples it with electroreduction conditioning (ERC) treatment as a strategy to enhance metal oxide reducibility and induce oxygen vacancies, advancing NH4+ production from NO3RR. Here, supported by a suite of ex situ and in situ characterization measurements, the findings reveal that Ru enrichment promotes Co species reduction and oxygen vacancy formation. Further, as evidenced by the theoretical calculations, Ru integration lowers the energy barrier for oxygen vacancy formation, thereby facilitating a more energy‐efficient NO3RR‐to‐NH4+ pathway. Optimal catalytic activity is realized with a Ru loading of 10 at.% (named 10Ru/Co3O4), achieving a high NH4+ production rate (98 nmol s−1 cm−2), selectivity (97.5%) and current density (≈100 mA cm−2) at −1.0 V vs RHE. The findings not only provide insights into defect engineering via the incorporation of secondary sites but also lay the groundwork for innovative catalyst design aimed at improving NH4+ yield from NO3RR. This research contributes to the ongoing efforts to develop sustainable electrochemical processes for nitrogen cycle management.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Single-atom Co alloyed Ru for electrocatalytic nitrite reduction to ammonia

Fuzhou Wang,Jiaqi Xiang,Guike Zhang,Kai Chen,Ke Chu

DOI: https://doi.org/10.1007/s12274-023-6261-2

IF: 9.9

2023-11-09

Nano Research

Abstract:Electrochemical converting NO 2 − into NH 3 (NO 2 RR) holds an enormous prospect to attain efficient NH 3 electrosynthesis and polluted NO 2 − mitigation. Herein, we report single-atom Co alloyed Ru (Co 1 Ru) as an efficient and durable NO 2 RR catalyst. Extensive experimental and theoretical investigations reveal that single-atom Co alloying of Ru enables the construction of Co 1 Ru heteronuclear active sites to synergistically promote NO 2 − activation/hydrogenation while suppressing the competitive H 2 evolution, rendering the greatly enhanced activity and selectivity of Co 1 Ru towards the NO 2 RR. Consequently, Co 1 Ru assembled within a flow cell exhibits an impressive NH 3 yield rate of 2379.2 μmol·h −1 ·cm −2 with an NH 3 -Faradaic efficiency of 92% at a high current density of 415.9 mA·cm −2 , which is among the highest NO 2 RR performances reported to date.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Ru‐Incorporation‐Induced Phase Transition in Co Nanoparticles for Low‐Concentration Nitric Oxide Electroreduction to Ammonia at Low Potential

Dongdong Wang,Guilan Fan,Deyan Luan,Yan Guo,Xiaojun Gu,Xiong Wen (David) Lou

DOI: https://doi.org/10.1002/adma.202408580

IF: 29.4

2024-11-08

Advanced Materials

Abstract:Electrocatalytic low‐concentration NO conversion can effectively alleviate the artificially destroyed N‐cycle balance. RuCo alloy nanoparticles in the hexagonal close‐packed phase are synthesized and demonstrated as an electrocatalyst for efficient NO electroreduction. It exhibits a record‐high Faraday efficiency of 99.2% and an NH3 yield of 77.76 μg h−1 mgcat−1 at a low potential. With this RuCo electrocatalyst, a Zn‐NO battery is assembled to simultaneously achieve NO removal, NH3 synthesis, and power output. Electrocatalytic reduction of nitric oxide (NO) to ammonia (NH3) represents a potential solution for improving the disrupted nitrogen cycle balance. Unfortunately, designing efficient electrocatalysts for NO reduction reaction (NORR) remains a notable challenge, especially at low concentrations. Herein, a displacement‐alloying strategy is reported to successfully induce the phase transition of Co nanoparticles supported on carbon nanosheets from face‐centered cubic (fcc) to hexagonal close‐packed (hcp) structure through Ru incorporation. The obtained RuCo alloy with hcp phase structure (hcp‐RuCo) exhibits apparent NORR activity with a record‐high Faraday efficiency of 99.2% and an NH3 yield of 77.76 μg h−1 mgcat−1 at −0.1 V versus reversible hydrogen electrode at a NO concentration of 1 vol %, surpassing Co nanoparticles with fcc phase structure and most reported catalysts. Density functional theory calculations reveal that the excellent NORR activity of hcp‐RuCo can be attributed to the optimized electronic structure of Co site and lowered energy barrier of the potential rate‐determining step through phase transition. Furthermore, the assembled Zn‐NO battery using hcp‐RuCo as the cathode achieves a power density of 2.33 mW cm−2 and an NH3 yield of 45.94 μg h−1 mgcat−1. This work provides a promising research perspective for low‐concentration NO conversion.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Electroreduction of Nitrate to Ammonia on Palladium–Cobalt–Oxygen Nanowire Arrays

Min Liu,Qiqi Mao,Keke Shi,Ziqiang Wang,You Xu,Xiaonian Li,Liang Wang,Hongjing Wang

DOI: https://doi.org/10.1021/acsami.1c19412

2022-03-09

Abstract:Developing high-efficiency electrocatalysts for the selective reduction of nitrate to valuable ammonia is of great significance. Herein, Pd–PdO-modified Co3O4 nanowire arrays on nickel foam (PdCoO/NF) are fabricated by a facile cation-exchange reaction. Pd and PdO can facilitate the generation of adsorbed hydrogen, and abundant oxygen vacancies can promote nitrate activation. Therefore, the PdCoO/NF exhibits a superior nitrate conversion rate (89.3%), Faradaic efficiency (88.6%), and ammonium selectivity (95.3%) at −1.3 V versus a saturated calomel electrode. The source of the produced ammonia is confirmed by 15N isotope labeling experiments and 1H magnetic resonance. This presented synthetic method provides a powerful strategy for the preparation of nanowire arrays with controllable compositions for selective nitrate electroreduction to ammonia.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c19412.Experimental details; SEM images; calibration curves of KNO2, KNO3, and NH4Cl; NO3––N conversion rates and selectivity of NH4+–N; NH4+ yield rate; FEs of different catalysts; 1H NMR spectra; XRD patterns; EDX spectra; EIS; and more comparative information (PDF)This article has not yet been cited by other publications.

materials science, multidisciplinary,nanoscience & nanotechnology
Accelerated ammonia electrosynthesis of cobalt hydroxide through electronic modulation with ultralow noble metal doping

Fengcai Lei,Ruixue Huai,Menghan Zhang,Ying Wang,Jing Yu,Yuhan Hou,Junfeng Xie,Pin Hao,Bo Tang

DOI: https://doi.org/10.1039/d4cc04109g

2024-10-15

Abstract:This study introduces an innovative method to ammonia production through electrocatalytic reduction of nitrate using Ru-doped Co(OH)2. The incorporation of Ru into the Co(OH)2 was found to markedly enhance the catalytic activity by optimizing the electronic structure and increasing the number of active sites.
Highly stable Mo-doped Fe 2 P and Fe 3 P monolayers as low-onset-potential electrocatalysts for nitrogen fixation

Jie Wu,Jia-Hui Li,Yang-Xin Yu

DOI: https://doi.org/10.1039/d0cy02192j

2021-01-01

Abstract:Mo atom doping can modify the electronic properties of Fe 2 P and Fe 3 P monolayers, and significantly enhance their NRR activities with onset potentials as low as −0.30 V and −0.17 V, respectively.

chemistry, physical
Highly stable Mo-doped Fe2P and Fe3P monolayers as low-onset-potential electrocatalysts for nitrogen fixation

Jie Wu,Jia-Hui Li,Yang-Xin Yu

DOI: https://doi.org/10.1039/d0cy02192j

IF: 6.177

2021-01-01

Catalysis Science & Technology

Abstract:Ammonia (NH3) is an essential ingredient for fertilizer production and a carbon-free energy carrier for engineering applications. Searching for novel electrocatalysts with low onset potential, high selectivity and excellent stability is still one of the most attractive and challenging topics. Here, based on the conductor-like screening model and first-principles calculations, we systematically investigated nitrogen reduction reaction (NRR) pathways occurring on iron-based phosphide monolayers. It can be found that Mo-doped Fe2P and Fe3P monolayers can efficiently promote the NRR with onset potentials of -0.30 V and -0.17 V, respectively, especially for the Mo-doped Fe3P monolayer, which has the lowest onset potential to date. Electronic analysis shows that the Mo atom doping can significantly enhance the degree of matching between the d-orbitals of transition metal atoms and the p-orbitals of the N-2 molecule, contributing to the activation of dinitrogen. Furthermore, Mo and Fe atoms provide bimetallic active sites, helping to avoid the linear relationship during the NRR pathway. Besides, the competing hydrogen evolution reaction (HER) is suppressed because of larger onset potentials and ab initio molecular dynamics (AIMD) simulations were performed to identify the high stabilities of the Mo-doped monolayers. This work offers useful insights into the design of high-performance electrocatalysts for the NRR and provides guidance for future experimental and theoretical investigations.
Constructing Ru@C3N4/Cu Tandem Electrocatalyst with Dual‐Active Sites for Enhanced Nitrate Electroreduction to Ammonia

Yinan Zheng,MingXin Qin,Xin Yu,Hu Yao,Wenhua Zhang,Gang Xie,Xiaohui Guo

DOI: https://doi.org/10.1002/smll.202302266

IF: 13.3

2023-05-15

Small

Abstract:Ru@C3N4/Cu Tandem electrocatalyst are fabricated by in situ oxidation and two‐step pyrolysis process, which exhibit superior electrocatalytic activity and selectivity toward Ammonia synthesis. The excellent NO3−RR performance is mainly attributed to the dual active sites from the Ru and Cu species. Electroreduction of nitrate to ammonia reaction (NO3−RR) is considered as a promising carbon‐free energy technique, which can eliminate nitrate from waste‐water also produce value‐added ammonia. However, it remains a challenge for achieving satisfied ammonia selectivity and Faraday efficiency (FE) due to the complex multiple‐electron reduction process. Herein, a novel Tandem electrocatalyst that Ru dispersed on the porous graphitized C3N4 (g‐C3N4) encapsulated with self‐supported Cu nanowires (denoted as Ru@C3N4/Cu) for NO3−RR is presented. As expected, a high ammonia yield of 0.249 mmol h−1 cm−2 at −0.9 V and high FENH3 of 91.3% at −0.8 V versus RHE can be obtained, while achieving excellent nitrate conversion (96.1%) and ammonia selectivity (91.4%) in neutral solution. In addition, density functional theory (DFT) calculations further demonstrate that the superior NO3−RR performance is mainly resulted from the synergistic effect between the Ru and Cu dual‐active sites, which can significantly enhance the adsorption of NO3− and facilitate hydrogenation, as well as suppress the hydrogen evolution reaction, thus lead to highly improved NO3−RR performances. This novel design strategy would pave a feasible avenue for the development of advanced NO3−RR electrocatalysts.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Preparation of Ru-doped Cu-based catalyst for enhanced electrochemical ammonia synthesis from efficient electrocatalytic nitrate reduction

Anmin Liu,Guangxin Li,Jianghui Cao,Fang Zhao,Xiru Chen,Qianqian Hua,Liguo Gao,Tingli Ma,Xuefeng Ren

DOI: https://doi.org/10.1039/d3cy01072d

IF: 6.177

2023-09-26

Catalysis Science & Technology

Abstract:Ammonia (NH3) is not only an essential feedstock for fertilizer, but also deemed as a potential hydrogen carrier. Worldwide industrial-scale NH3 synthesis relies heavily on the Haber-Bosch process, which involves harsh operation under reaction conditions. In addition, nitrate is prevalent in groundwater and surface water, causing serious pollution. Electrocatalytic nitrate reduction reaction (NITRR), a sustainable ammonia synthesis technique, is the most potential alternative to the traditional Haber-Bosch process. we combined the noble metal Ru by impregnation based on Cu-based materials that can inhibit HER to prepare Cu/Cu2O/RuO2@C composites. Surprisingly, the NH3 yield of Cu/Cu2O/RuO2@C composites prepared by NITRR reached 209.44 μmol∙cm-2∙h-1 and 82.40% Faraday efficiency at -0.6 V (vs. RHE). Such a high reduction activity is attributed to the synergistic effect between Ru heteroatoms and the Cu-based material. In addition, Cu/Cu2O/RuO2@C exhibited good cycling stability and repeatability. This work highlights the potential importance of electrocatalyst design, contributing to the research and exploration of related materials.

chemistry, physical
A metallic Cu 2 N monolayer with planar tetracoordinated nitrogen as a promising catalyst for CO 2 electroreduction

Jingjing Jia,Zhongxu Wang,Yu Liu,Fengyu Li,Yongchen Shang,Yuejie Liu,Qinghai Cai,Jingxiang Zhao

DOI: https://doi.org/10.1039/d1ta09209j

IF: 11.9

2022-01-01

Journal of Materials Chemistry A

Abstract:By means of a particle swarm optimization search and density functional theory computations, we predicted a hitherto unknown Cu 2 N monolayer with planar hexacoordinate Cu and tetracoordinate N atoms as a CO 2 RR catalyst.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Alloying Pd with Ru enables electroreduction of nitrate to ammonia with ∼100% faradaic efficiency over a wide potential window

Yue Hu,Jiawei Liu,Wenyu Luo,Jinfeng Dong,Carmen Lee,Nan Zhang,Mengxin Chen,Yifan Xu,Dongshuang Wu,Mingsheng Zhang,Qiang Zhu,Erhai Hu,Dongsheng Geng,Lixiang Zhong,Qingyu Yan

DOI: https://doi.org/10.1039/d4sc00558a

2024-05-03

Abstract:Electrocatalytic nitrate (NO3-) reduction reaction (eNO3-RR) to ammonia under ambient conditions is deemed a sustainable route for wastewater treatment and a promising alternative to the Haber-Bosch process. However, there is still a lack of efficient electrocatalysts to achieve high NH3 production performance at wastewater-relevant low NO3- concentrations. Herein, we report a Pd74Ru26 bimetallic nanocrystal (NC) electrocatalyst capable of exhibiting an average NH3 FE of ∼100% over a wide potential window from 0.1 to -0.3 V (vs. reversible hydrogen electrode, RHE) at a low NO3- concentration of 32.3 mM. The average NH3 yield rate at -0.3 V can reach 16.20 mg h-1 cm-2. Meanwhile, Pd74Ru26 also demonstrates excellent electrocatalytic stability for over 110 h. Experimental investigations and density functional theory (DFT) calculations suggest that the electronic structure modulation between Pd and Ru favors the optimization of NO3- transport with respect to single components. Along the *NO3 reduction pathway, the synergy between Pd and Ru can also lower the energy barrier of the rate-determining steps (RDSs) on Ru and Pd, which are the protonation of *NO2 and *NO, respectively. Finally, this unique alloying design achieves a high-level dynamic equilibrium of adsorption and coupling between *H and various nitrogen intermediates during eNO3-RR.
Electronegative Phosphorus-Integrated Co 2+ Active Sites for Enhanced Electrocatalytic Nitrogen Reduction

Yuanyuan Xiong,Jingxian Li,Xiaoxuan Wang,Xinyue Chi,Shuyuan Li,Yanfei Sun,Zheng Tang,Zishan Hou,Jiangzhou Xie,Zhiyu Yang,Yi-Ming Yan

DOI: https://doi.org/10.1021/acs.inorgchem.4c00618

IF: 4.6

2024-04-16

Inorganic Chemistry

Abstract:In the quest for proficient electrocatalysts for ammonia's electrocatalytic nitrogen reduction, cobalt oxides, endowed with a rich d-electron reservoir, have emerged as frontrunners. Despite the previously evidenced prowess of CoO in this realm, its ammonia yield witnesses a pronounced decline as the reaction unfolds, a phenomenon linked to the electron attrition from its Co^(2+) active sites during electrocatalytic nitrogen reduction reaction (ENRR). To counteract this vulnerability, we...

chemistry, inorganic & nuclear
Enhancing electrochemical nitrogen reduction with Ru nanowires via the atomic decoration of Pt

Weiqing Zhang,Liting Yang,Changhua An,Jichao Zhang,Junfa Zhu,Peng Chen

DOI: https://doi.org/10.1039/d0ta09937f

IF: 11.9

2020-01-01

Journal of Materials Chemistry A

Abstract:Achieving an efficient electrochemical nitrogen reduction reaction (ENRR) remains a great challenge, demanding the development of a new strategy for ENRR catalyst engineering. Herein, we demonstrate a largely improved ENRR by the controlled engineering of Ru nanowires with atomic Pt decoration. Specifically, the readily synthesized Ru88Pt12 nanowires exhibit a high NH3 production rate of 47.1 mu g h(-1) mg(cat)(-1) and faradaic efficiency of 8.9% at -0.2 V, which are 5.3 and 14.6 times higher than those values for Ru nanowires. They also show outstanding stability, as evidenced by the full preservation of the NH3 yield and faradaic efficiency even after 15 h of electrocatalysis. As revealed by theoretical investigations, the d-band center of Ru atoms is upshifted by the tensile strain due to the presence of Pt atoms, leading to the selective enhancement of N-2 adsorption and the stabilization of N2H*. Such an atomic engineering method may be applied to precisely tailor other metal nanocatalysts for different applications.
Heterostructured Co/Co3O4 anchored on N-doped carbon nanotubes as a highly efficient electrocatalyst for nitrate reduction to ammonia

Xianxian He,Hongfei Liu,Jiangzhou Qin,Zhaodong Niu,Jincheng Mu,Baojun Liu

DOI: https://doi.org/10.1039/d3dt01705b

IF: 4

2023-07-14

Dalton Transactions

Abstract:Electrochemical reduction of nitrate (NO3−) to ammonia (NH3) reaction has emerged as an attractive approach for selectively reducing NO3− to highly value-added NH3 and removing NO3− pollutants simultaneously. In this work, heterostructured Co/Co3O4 anchored on N-doped carbon nanotubes was prepared and applied for NO3− reduction towards NH3 in alkaline conditions. The catalyst achieves an outstanding performance with up to 67% NH3 Faradaic efficiency at -1.2 V vs. Hg/HgO and 8.319 mg h-1 mgcat-1 yield at -1.7 V vs. Hg/HgO. In addition, it also displays good long-term stability. 15N isotopic labelling experiments prove that the yielded NH3 is derived from NO3− species. In-situ electrochemical Raman spectra revealed that the structure of as-prepared catalyst showed outstanding stability and identified the possible intermediates during electrocatalytic NO3− reduction reaction (NO3RR).

chemistry, inorganic & nuclear
In-situ electrochemical reconstruction and modulation of adsorbed hydrogen coverage in cobalt/ruthenium-based catalyst boost electroreduction of nitrate to ammonia

Jian Zhang,Thomas Quast,Bashir Eid,Yen-Ting Chen,Ridha Zerdoumi,Stefan Dieckhöfer,João R C Junqueira,Sabine Seisel,Wolfgang Schuhmann

DOI: https://doi.org/10.1038/s41467-024-52780-x

2024-10-03

Abstract:The electroreduction of nitrate offers a promising, sustainable, and decentralized route to generate valuable ammonia. However, a key challenge in the nitrate reduction reaction is the energy efficiency of the reaction, which requires both a high ammonia yield rate and a high Faradaic efficiency of ammonia at a low working potential (≥-0.2 V versus reversible hydrogen electrode). We propose a bimetallic Co-B/Ru12 electrocatalyst which utilizes complementary effects of Co-B and Ru to modulate the quantity of adsorbed hydrogen and to favor the specific hydrogenation for initiating nitrate reduction reaction at a low overpotential. This effect enables the catalyst to achieve a Faradaic efficiency for ammonia of 90.4 ± 9.2% and a remarkable half-cell energy efficiency of 40.9 ± 4% at 0 V versus reversible hydrogen electrode. The in-situ electrochemical reconstruction of the catalyst contributes to boosting the ammonia yield rate to a high level of 15.0 ± 0.7 mg h-1 cm-2 at -0.2 V versus reversible hydrogen electrode. More importantly, by employing single-entity electrochemistry coupled with identical location transmission electron microscopy, we gain systematic insights into the correlation between the increase in the catalyst's active sites and its structural transformations during the nitrate reduction reaction.
Three-dimensional Cu3P/Cu Heterostructure As Robust Tandem Electrocatalyst for Selective Electroreduction of Nitrate to Ammonia

Tianyi Wu,Jiaxuan Chen,Lingyue Liu,Xiaolei Qu,Shourong Zheng,Dongqiang Zhu

DOI: https://doi.org/10.1016/j.apcatb.2024.124408

2024-01-01

Abstract:Electrochemical reduction of nitrate to ammonia (NH3) provides an attractive approach to accomplish resource utilization of pollutants, while exploring efficient catalysts with high catalytic activity and NH3 FE at low applied potentials remains great challenging. Herein, we constructed a three-dimensional Cu3P/Cu catalyst and studied its catalytic performances in electrochemical nitrate reduction reaction. The Cu3P/Cu catalyst with finely balanced metallic Cu and Cu3P sites exhibits a high NH3 yield of 4.27 mg h−1cm−2 after 1 h reaction at a low applied potential (-0.05 V vs RHE), outperforming most of previously reported Cu-based catalysts. DFT calculations demonstrate the favored reduction of nitrate to nitrite on metallic Cu and hydrogenation of nitrite to NH3 on Cu3P. This study opens up new opportunities for the application of Cu3P/Cu catalyst as a robust tandem electrocatalyst in the large-scale production of NH3 through electrochemical reduction with low energy consumption.
Highly Selective Electrochemical Nitrate to Ammonia Conversion by Dispersed Ru in a Multielement Alloy Catalyst

Meiqi Yang,Boyang Li,Shuke Li,Qi Dong,Zhennan Huang,Sunxiang Zheng,Ying Fang,Guangye Zhou,Xi Chen,Xiaobo Zhu,Tangyuan Li,Miaofang Chi,Guofeng Wang,Liangbing Hu,Zhiyong Jason Ren

DOI: https://doi.org/10.1021/acs.nanolett.3c01978

IF: 10.8

2023-06-29

Nano Letters

Abstract:Electrochemical reduction of nitrate to ammonia (NH(3)) converts an environmental pollutant to a critical nutrient. However, current electrochemical nitrate reduction operations based on monometallic and bimetallic catalysts are limited in NH(3) selectivity and catalyst stability, especially in acidic environments. Meanwhile, catalysts with dispersed active sites generally exhibit a higher atomic utilization and distinct activity. Herein, we report a multielement alloy nanoparticle catalyst with...

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Selectivity-Enhanced Electroreduction of CO 2 to CO at Novel Ru-Linked-GO Nanohybrids: the Role of Nanoarchitecture

Neda Khedri,Ali Reza Mahjoub,Amir Hossein Cheshme Khavar,RubĂ©n Rizo,Juan M. Feliu

DOI: https://doi.org/10.1021/acs.inorgchem.3c03733

IF: 4.6

2024-04-19

Inorganic Chemistry

Abstract:Recently, global-scale efforts have been conducted for the electroreduction of CO(2) as a potentially beneficial pathway for the conversion of greenhouse gases to useful chemicals and renewable fuels. This study focuses on the development of selective and sustainable electrocatalysts for the reduction of aqueous CO(2) to CO. A Ru^(II)complex [Ru(tptz)(ACN)Cl(2)] (RCMP) (tptz = 2,4,6-tris(2-pyridyl)-1,3,5-triazine, ACN = acetonitrile) was prepared as a molecular electrocatalyst for the CO(2)...

chemistry, inorganic & nuclear

Highly selective electroreduction of nitrate to ammonia on a Ru-doped tetragonal Co 2 P monolayer with low-limiting overpotential

Highly Selective Electroreduction of Nitrate to Ammonia on a Ru-doped Tetragonal Co2P Monolayer with Low-Limiting Overpotential

Gradient-concentration RuCo Electrocatalyst for Efficient and Stable Electroreduction of Nitrate into Ammonia

Ru‐Induced Defect Engineering in Co3O4 Lattice for High Performance Electrochemical Reduction of Nitrate to Ammonium

Single-atom Co alloyed Ru for electrocatalytic nitrite reduction to ammonia

Ru‐Incorporation‐Induced Phase Transition in Co Nanoparticles for Low‐Concentration Nitric Oxide Electroreduction to Ammonia at Low Potential

Electroreduction of Nitrate to Ammonia on Palladium–Cobalt–Oxygen Nanowire Arrays

Accelerated ammonia electrosynthesis of cobalt hydroxide through electronic modulation with ultralow noble metal doping

Highly stable Mo-doped Fe 2 P and Fe 3 P monolayers as low-onset-potential electrocatalysts for nitrogen fixation

Highly stable Mo-doped Fe<sub>2</sub>P and Fe<sub>3</sub>P monolayers as low-onset-potential electrocatalysts for nitrogen fixation

Constructing Ru@C3N4/Cu Tandem Electrocatalyst with Dual‐Active Sites for Enhanced Nitrate Electroreduction to Ammonia

Preparation of Ru-doped Cu-based catalyst for enhanced electrochemical ammonia synthesis from efficient electrocatalytic nitrate reduction

A metallic Cu 2 N monolayer with planar tetracoordinated nitrogen as a promising catalyst for CO 2 electroreduction

Alloying Pd with Ru enables electroreduction of nitrate to ammonia with ∼100% faradaic efficiency over a wide potential window

Electronegative Phosphorus-Integrated Co 2+ Active Sites for Enhanced Electrocatalytic Nitrogen Reduction

Enhancing electrochemical nitrogen reduction with Ru nanowires <i>via</i> the atomic decoration of Pt

Heterostructured Co/Co3O4 anchored on N-doped carbon nanotubes as a highly efficient electrocatalyst for nitrate reduction to ammonia

In-situ electrochemical reconstruction and modulation of adsorbed hydrogen coverage in cobalt/ruthenium-based catalyst boost electroreduction of nitrate to ammonia

Three-dimensional Cu3P/Cu Heterostructure As Robust Tandem Electrocatalyst for Selective Electroreduction of Nitrate to Ammonia

Highly Selective Electrochemical Nitrate to Ammonia Conversion by Dispersed Ru in a Multielement Alloy Catalyst

Selectivity-Enhanced Electroreduction of CO 2 to CO at Novel Ru-Linked-GO Nanohybrids: the Role of Nanoarchitecture