Abstract:Abstract High-precision detection of electric charge is critical for physical, chemical, and biological measurements. Nanophotonic optomechanical system confines the optical field at the nanoscale and enables a strong interaction between optical cavity and mechanical resonator. Its high optical quality factor cavity and strong optomechanical coupling are promising for precision sensing applications. Here an integrated optomechanical electrometer is proposed for the electric charge sensing using a zipper cavity with a suspended photonic crystal nanobeam (PCN) acting as a movable mechanical resonator. As the electrostatic force arising from the electric voltage to be measured interacts with the mechanical motion of the movable PCN and modulates its resonance through electrostatic stiffening effect, optomechanical coupling transduces the mechanical motion to the optical field with enhanced sensitivity. The resonance shift of the mechanical resonator can be monitored to detect the electric voltage with a sensitivity of 0.007 Hz / m V 2 $\mathrm{Hz}/\mathrm{m}{\mathrm{V}}^{2}$ . Moreover, the sensing performance can be further enhanced with the operation of the optomechanical electrometer in the self-sustained oscillation above threshold power. Owing to the narrow-linewidth of detector radio frequency (RF) spectrum with a large peak-to-noise floor ratio (up to 73.5 dB), the enhanced electrical sensitivity of 0.014 Hz / m V 2 $\mathrm{Hz}/\mathrm{m}{\mathrm{V}}^{2}$ is achieved with a high resolution of 1.37 m V 2 H z − 1 / 2 $1.37\,\mathrm{m}{\mathrm{V}}^{2}\mathrm{H}{\mathrm{z}}^{-1/2}$ . A theoretical minimal detectable electrostatic charge is calculated as 1.33 × 10 − 2 eH z − 1 / 2 $1.33{\times}{10}^{-2}\,\mathrm{eH}{\mathrm{z}}^{-1/2}$ by converting the measured electric voltage versus RF shift to an approximatively linear relationship. This on-chip optomechanical electrometry scheme provides a powerful solution to the ultrasensitive determination of charged nanoparticles in biological and chemical applications.

Gold Flake‐Enabled Miniature Capacitive Picobalances

Optical Nanofiber-Enabled Self-Detection Picobalance

Open Carbon Nanopipettes As Resistive-Pulse Sensors, Rectification Sensors, and Electrochemical Nanoprobes.

Highly Sensitive, Precise, and Traceable Measurement of Force

Acoustofluidic localization of sparse particles on a piezoelectric resonant sensor for nanogram-scale mass measurements

Nanowire as pico-gram balance at workplace atmosphere

Flexible Capacitive Pressure Sensor with Optimized Interdigital AgNWs Electrodes for Wide-Range Pressure Monitoring

A nanonewton force sensor using a U-shape tapered microfiber interferometer

Nanogold Aggravating MEMS Cantilever Capacitance Detection Biochip

A High-Resolution MEMS Capacitive Force Sensor with Bionic Swallow Comb Arrays for Ultralow Multiphysics Measurement

A novel technique of microforce sensing and loading

High-sensitivity Photonic Crystal Fiber Force Sensor Based on Sagnac Interferometer for Weighing

Probe-Type Microforce Sensor for Mirco/Nano Experimental Mechanics

Fiber‐integrated Force Sensor using 3D Printed Spring‐Composed Fabry‐Perot Cavities with a High Precision Down to Tens of Piconewton

Single charge regime electrodynamic force measuring in solution by upconversion photonic force microscope

Ultrasensitive nanoscale optomechanical electrometer using photonic crystal cavities

Novel Capacitive Sensing System Design of A Microelectromechanical Systems Accelerometer for Gravity Measurement Applications

Robust Optical-Levitation-Based Metrology of Nanoparticle's Position and Mass.

Development and Proof of Concept of a Miniaturized MEMS Quantum Tunneling Accelerometer Based on PtC Tips by Focused Ion Beam 3D Nano-Patterning

Design of a New Type of In-Hole Gold-Coated High-Performance Quasi-PCF Sensor Enhanced with Surface Plasmon Resonance

Compact Dual-Frequency Fiber Laser Accelerometer with Sub-Μg Resolution