Abstract:This study investigates the decolorization of two widely used textile dyes (Acid Black 172 (AB172) and Disperse Blue 56 (DB56) by using a combined sono-photo-electro-Fenton (SPEF) process. The effects of dye structure and processing factors on dye degradation from contaminated water and COD removal efficiency were determined by adopting response surface methodology. The results confirmed that current density, irradiation time, pH, ({ aise0.7exhbox{({{ ext{H}}_{{2}} { ext{O}}_{{2}} })} !mathord{left/ {vphantom {{{ ext{H}}_{{2}} { ext{O}}_{{2}} } {{ ext{C}}_{{0}} }}} ight.kern-0em} !lower0.7exhbox{({{ ext{C}}_{{0}} })}}), and AB172 concentration had the most impacts on COD removal, respectively, whereas DB56 removal efficiency was highly dependent on the initial dye concentration and ({ aise0.7exhbox{({{ ext{H}}_{{2}} { ext{O}}_{{2}} })} !mathord{left/ {vphantom {{{ ext{H}}_{{2}} { ext{O}}_{{2}} } {{ ext{C}}_{{0}} }}} ight.kern-0em} !lower0.7exhbox{({{ ext{C}}_{{0}} })}}), compared to other processing factors. The dye degradation efficiency of 95.5% and COD removal efficiency of 91.6% for DB56 were obtained at optimum conditions of pH = 3, current density = 2 mA.cm−2, dye concentration = 200 ppm, ({ aise0.7exhbox{({{ ext{H}}_{{2}} { ext{O}}_{{2}} })} !mathord{left/ {vphantom {{{ ext{H}}_{{2}} { ext{O}}_{{2}} } {{ ext{C}}_{{0}} }}} ight.kern-0em} !lower0.7exhbox{({{ ext{C}}_{{0}} })}}) of 0.78 and irradiation time of 30 min. In the case of AB172, the same optimum conditions were found unlike reaction time of 50 min and ({ aise0.7exhbox{({{ ext{H}}_{{2}} { ext{O}}_{{2}} })} !mathord{left/ {vphantom {{{ ext{H}}_{{2}} { ext{O}}_{{2}} } {{ ext{C}}_{{0}} }}} ight.kern-0em} !lower0.7exhbox{({{ ext{C}}_{{0}} })}}) of 0.33, which resulted in the optimal dye degradation efficiency and COD removal of 97.4% 94.5%, respectively. These results verified that the type of dye and its structure can be a key factor in the Fenton-based degradation process. The comparison of the performance of different Fenton-based processes confirmed that the removal efficiency of electro-Fenton, sono-electro-Fenton, photo-electro-Fenton, and SPEF was 82–88%, 89.5–91%, 91.5–92.3% and 95.5–97.4%, respectively. The Fenton-based processes are highly effective methods that can be applied for water and wastewater treatment.Graphic

Electro-Fenton assisted sonication for removal of ammoniacal nitrogen and organic matter from dye intermediate industrial wastewater

Sequential electro-coagulation and electro-Fenton processes for the treatment of textile wastewater

Comparison of ozonation, Fenton, and photo-Fenton processes for the treatment of textile dye-bath effluents integrated with electrocoagulation

Study on Advanced Treatment of Dyeing Wastewater by Fenton Oxidation

Effect of solution pH on the performance of three electrolytic advanced oxidation processes for the treatment of textile wastewater and sludge characteristics

Electron Beam Technology Coupled to Fenton Oxidation for Advanced Treatment of Dyeing Wastewater: from Laboratory to Full Application

Investigation and optimization of the performance of sono-photo-electro-Fenton process for removal of Acid Black 172 and Disperse Blue 56 from polluted water: comparison of the degradation activity with electro-Fenton-based processes

Chemical or electrochemical techniques, followed by ion exchange, for recycle of textile dye wastewater

The effect of media ion and nitrogen gas dissolved in water on color removal with sonolysis, Fenton and sono-Fenton in the continuous flow ultrasonic reactor

Integrated Fenton-like and ozonation based advanced oxidation processes for treatment of real-time textile effluent containing azo reactive dyes

RESPONSE SURFACE METHODOLOGY APPLIED TO ELECTRO-FENTON PROCESS FOR DEGRADATION OF RED BEMACID AS TEXTILE DYE MODEL

Electro-Fenton technology for dairy wastewater treatment

Advances in the decontamination of wastewaters with synthetic organic dyes by electrochemical Fenton-based processes

Removal of COD and Color from Textile Wastewater by the Fenton and UV/H2O2 Oxidation Processes and Optimization

Removal of Neutral Red Dye via Electro-Fenton Process: A Response Surface Methodology Modeling

Process Optimization of Electrochemical Oxidation of Ammonia to Nitrogen for Actual Dyeing Wastewater Treatment

Comprehensive study of Fenton reaction efficiency on textile wastewater treatment from dye solution to real effluent with emphasis on Fukui function analysis

Impact of different anode materials on electro-Fenton process and tannery wastewater treatment using sequential electro-Fenton and electrocoagulation

Treatment of Reactive Orange 16 Dye-Bearing Wastewater by Electro-Fenton Process with Stainless-Steel Electrodes: Statistical Optimization and Operational Analysis

Advanced Treatment of Actual Textile Dye Wastewater by Fenton‐flocculation Process

High Concentration Dyeing Waste Water Pretreatment by Fe-C Micro-Electrolysis