Abstract:This study investigates the decolorization of two widely used textile dyes (Acid Black 172 (AB172) and Disperse Blue 56 (DB56) by using a combined sono-photo-electro-Fenton (SPEF) process. The effects of dye structure and processing factors on dye degradation from contaminated water and COD removal efficiency were determined by adopting response surface methodology. The results confirmed that current density, irradiation time, pH, ({ aise0.7exhbox{({{ ext{H}}_{{2}} { ext{O}}_{{2}} })} !mathord{left/ {vphantom {{{ ext{H}}_{{2}} { ext{O}}_{{2}} } {{ ext{C}}_{{0}} }}} ight.kern-0em} !lower0.7exhbox{({{ ext{C}}_{{0}} })}}), and AB172 concentration had the most impacts on COD removal, respectively, whereas DB56 removal efficiency was highly dependent on the initial dye concentration and ({ aise0.7exhbox{({{ ext{H}}_{{2}} { ext{O}}_{{2}} })} !mathord{left/ {vphantom {{{ ext{H}}_{{2}} { ext{O}}_{{2}} } {{ ext{C}}_{{0}} }}} ight.kern-0em} !lower0.7exhbox{({{ ext{C}}_{{0}} })}}), compared to other processing factors. The dye degradation efficiency of 95.5% and COD removal efficiency of 91.6% for DB56 were obtained at optimum conditions of pH = 3, current density = 2 mA.cm−2, dye concentration = 200 ppm, ({ aise0.7exhbox{({{ ext{H}}_{{2}} { ext{O}}_{{2}} })} !mathord{left/ {vphantom {{{ ext{H}}_{{2}} { ext{O}}_{{2}} } {{ ext{C}}_{{0}} }}} ight.kern-0em} !lower0.7exhbox{({{ ext{C}}_{{0}} })}}) of 0.78 and irradiation time of 30 min. In the case of AB172, the same optimum conditions were found unlike reaction time of 50 min and ({ aise0.7exhbox{({{ ext{H}}_{{2}} { ext{O}}_{{2}} })} !mathord{left/ {vphantom {{{ ext{H}}_{{2}} { ext{O}}_{{2}} } {{ ext{C}}_{{0}} }}} ight.kern-0em} !lower0.7exhbox{({{ ext{C}}_{{0}} })}}) of 0.33, which resulted in the optimal dye degradation efficiency and COD removal of 97.4% 94.5%, respectively. These results verified that the type of dye and its structure can be a key factor in the Fenton-based degradation process. The comparison of the performance of different Fenton-based processes confirmed that the removal efficiency of electro-Fenton, sono-electro-Fenton, photo-electro-Fenton, and SPEF was 82–88%, 89.5–91%, 91.5–92.3% and 95.5–97.4%, respectively. The Fenton-based processes are highly effective methods that can be applied for water and wastewater treatment.Graphic

Advances in the decontamination of wastewaters with synthetic organic dyes by electrochemical Fenton-based processes

A review on the photoelectro-Fenton process as efficient electrochemical advanced oxidation for wastewater remediation. Treatment with UV light, sunlight, and coupling with conventional and other photo-assisted advanced technologies

468 https://doi.org/10.31881/TLR.2024.010 Decolourization of Synthetic Wastewater Related to the Textile Industry Using Photo-Fenton

Study on Advanced Treatment of Dyeing Wastewater by Fenton Oxidation

Recent progress in treatment of dyes wastewater using microbial-electro-Fenton technology

Investigation and optimization of the performance of sono-photo-electro-Fenton process for removal of Acid Black 172 and Disperse Blue 56 from polluted water: comparison of the degradation activity with electro-Fenton-based processes

Highly efficient degradation of antibiotic residues with reagent-free photoelectro-fenton via hollow fiber gas diffusion electrode

High-efficiency electro-Fenton synergistic electrocoagulation for enhanced removal of refractory organic pollutants

Recent advances in electro-Fenton process and its emerging applications

Degradation of methylene blue by an E-Fenton process coupled with peroxymonosulfate via free radical and non-radical oxidation pathways

Removal enhancement of persistent basic fuchsin dye from wastewater using an eco-friendly, cost-effective Fenton process with sodium percarbonate and waste iron catalyst

Electro-Fenton degradation of synthetic dyes

A critical review on the recent progress in application of electro-Fenton process for decontamination of wastewater at near-neutral pH

A Novel Method for the Highly Effective Removal of Binary Dyes from Colored Dyeing Wastewater by Periodic Reversal/Direct Current-Activated Persulfate

Advanced Treatment of Actual Textile Dye Wastewater by Fenton‐flocculation Process

Electron Beam Technology Coupled to Fenton Oxidation for Advanced Treatment of Dyeing Wastewater: from Laboratory to Full Application

Advanced Oxidation Processes Based Emerging Technologies for Dye Wastewater Treatment

Tannic acid-Fe complex derivative-modified electrode with pH regulating function for environmental remediation by electro-Fenton process

Treatment of Dyeing Wastewater by Photo-assisted Fenton System

Photoelectro-Fenton System Including Electromagnetic Induction Electrodeless Lamp and Black Carbon Poly Tetra Fluoro Ethylene Air-Diffusion Cathode: Degradation Kinetics, Intermediates and Pathway for Azo Dye.

Efficient electrochemical advanced degradation of Red CL and Red WB dyes from the tanning industry using a boron-doped diamond anode