Abstract:The development of a viable structural health monitoring (SHM) technology for the operational condition monitoring of wind turbine blades is of great interest to the wind industry. In order for any SHM technology to achieve the technical readiness and performance required for an operational implementation, advanced signal processing algorithms need to be developed to adaptively remove noise and retain the underlying signals of interest that describe the damage-related information. The wavelet packet transform decomposes a measured time domain signal into a time-frequency representation enabling the removal of noise that may overlap with the signal of interest in time and/or frequency. However, the traditional technique suffers from several assumptions limiting its applicability in an operational SHM environment, where the noise conditions commonly exhibit erratic behavior. Furthermore, an exhaustive number of options exist when selecting the parameters used in the technique with limited guidelines that can help select the most appropriate options for a given application. Appropriately defining the technique tends to be a daunting task resulting in a general avoidance of the approach in the field of SHM.This work outlines an adaptive wavelet packet denoising algorithm applicable to numerous SHM technologies including acoustics, vibrations, and acoustic emission. The algorithm incorporates a blend of non-traditional approaches for noise estimation, threshold selection, and threshold application to augment the denoising performance of real-time structural health monitoring measurements. Appropriate wavelet packet parameters are selected through a simulation considering the trade-off between signal to noise ratio improvement and amount of signal energy retained. The wavelet parameter simulation can be easily replicated to accommodate any SHM technology where the underlying signal of interest is known, as is the case in most active-based approaches including acoustic and wave-propagation techniques. The finalized adaptive wavelet packet algorithm is applied to a comprehensive dataset demonstrating an active acoustic damage detection approach on a ~46 m wind turbine blade. The quality of the measured data and the damage detection performance obtained from simple spectral filtering is compared with the proposed wavelet packet technique. It is shown that the damage detection performance is enhanced in all but one test case by as much as 60%, and the false detection rate is reduced. The approach and the subsequent results presented in this paper are expected to help enable advancement in the performance of several established SHM technologies and identifies the considered acoustics-based SHM approach as a noteworthy option for wind turbine blade structural health monitoring.

Acoustic-based whistle detection of drain hole for wind turbine blade

Vibration Anomaly Detection of Wind Turbine Based on Temporal Convolutional Network and Support Vector Data Description

Acoustical damage detection of wind turbine blade using the improved incremental support vector data description

Damage Mode Identification and Singular Signal Detection of Composite Wind Turbine Blade Using Acoustic Emission

A novel transformer-enhanced and acoustic-based approach for wind turbine blade fault detection with integrated system implementation

Unsupervised acoustic detection of fatigue-induced damage modes from wind turbine blades

Wind turbine blade fault detection by acoustic analysis: Preliminary results

Acoustic-Signal-Based Damage Detection of Wind Turbine Blades—A Review

Acoustic monitoring of wind turbine blades using wavelet packet analysis and 1D convolutional neural networks

Damage identification of wind turbine blades using the microphone array under different parametric and measuring conditions: A prototype study with laboratory-scale models

Early warning of damaged wind turbine blades using spatial–temporal spectral analysis of acoustic emission signals

An adaptive wavelet packet denoising algorithm for enhanced active acoustic damage detection from wind turbine blades

Damage detection for wind turbine rotor blades using airborne sound

An experimental investigation into passive acoustic damage detection for structural health monitoring of wind turbine blades

A passive, blade-mounted ultrasonic bat deterrent for wind turbines

A Pattern Recognition Approach to Acoustic Emission Data Originating from Fatigue of Wind Turbine Blades

Damage Mode Identification of Composite Wind Turbine Blade under Accelerated Fatigue Loads Using Acoustic Emission and Machine Learning

Anomaly Identification of Wind Turbine Blades Based on Mel-Spectrogram Difference Feature of Aerodynamic Noise

A generalized computational approach to predict high-frequency acoustic pressure response of cavity structures for structural health monitoring of wind turbine blades

π-FBG Fiber Optic Acoustic Emission Sensor for the Crack Detection of Wind Turbine Blades

A novel hybrid strategy for damage detection of wind turbine yaw bearing