Abstract:An embeddable, robust and cost-effective optical interferometric strain sensor with nano-scale strain resolution is reported in this paper. The principal structure of the sensor consists of an optical fiber, a quartz rod coated with a thin gold layer, and two metal shells employed to transfer the strain, orient and protect the optical fiber and quartz rod. The optical fiber endface, combining with the gold-coated surface forms an extrinsic Fabry-Perot interferometer. When the sensor is subjected to an external compressive/tensile stress, slide between the two metal shells will occur, resulting in a cavity length variation of the interferometer. A temperature compensation design is employed in the structure to minimize the temperature crosstalk of the sensor. The sensor was firstly calibrated, and the result showed that our prototype sensor can realize a measurement resolution of 30 nanostrain (n) and a sensitivity of 10.01 /m over a range of 1000 . After calibration of the sensor, monitoring the shrinkage strain of a cubic brick of mortar in real time during the drying process was conducted. The strain sensor was compared with a commercial linear variable displacement transducer, and the comparison results in four weeks demonstrated that our sensor had much higher measurement resolution and gained more detailed and useful information. Due to the advantages of the extremely simple, robust and cost-effective configuration, it is believed that the sensor is significantly beneficial to practical applications, especially in structural health monitoring.

Fiber-optic extrinsic Fabry-Perot interferometer strain sensor with <50 pm displacement resolution using three-wavelength digital phase demodulation.

Strain Sensor Based on Gourd-Shaped Single-Mode-multimode-single-mode Hybrid Optical Fibre Structure.

Experimental Research of Strain and Temperature Based on Efpi Sensor

Optical fiber Fabry-Perot interferometer based embeddable strain sensor with 30 nano-strain resolution

High Sensitivity Fabry-Perot Interferometer Based on Offset Splicing Fibers and Vernier Effect for Strain Measurement

Miniaturized fiber Fabry–Pérot interferometer for strain sensing

Highly Precise In-Plane Displacement Sensor Based on an Asymmetric Fiber Fabry-Perot Interferometer.

Dual Fiber-Optic Fabry-Perot Interferometer Strain Sensor with Low-Cost Light-Emitting Diode Light Source

Discrete amplified sensing of temperature and strain

A Miniature Extrinsic Fabry-Pérot Interferometer Strain Sensor Based on Hollow-Core Photonic Crystal Fiber

Optical Fiber Extrinsic Fabry-Perot Interferometric Sensor for Measuring Tiny Displacement

An embeddable optical strain gauge based on a buckled beam

Ultrahigh resolution optical fiber strain sensor using dual Pound-Drever-Hall feedback loops.

Self-compensation three-wavelength demodulation method for the large phase extraction of extrinsic Fabry–Pérot interferometric sensors

Multiplexed Sub-Nano Resolution Quasi-Static Strain Sensor Based on Transient Response of Fabry-Perot Interferometers

In-Fiber Double-Layered Resonator for High-Sensitive Strain Sensing

Time-domain Multiplexed High Resolution Fiber Optics Strain Sensor System Based on Temporal Response of Fiber Fabry-Perot Interferometers

Polymer-capped fiber Fabry-Perot interferometer for large range displacement sensing

An Ultra-High-resolution Large-Dynamic-range Fiber Optic Static Strain Sensor Using Pound-Drever-Hall Technique

Simultaneous Strain and Temperature Measurement Using an Integrated Fibre Bragg Grating Extrinsic Fabry-Perot Sensor

Intensity-Modulated Strain Sensor Based on Fiber In-Line Mach–Zehnder Interferometer