Abstract:The indoor thermal environment is usually non-uniformly distributed in parameters such as temperature and velocity. For precise control of indoor environment, it is necessary to figure out the indoor non-uniform temperature distribution (INUTD) that empowers independently zone control according to the different requirements of occupants. Computational Fluid Dynamics (CFD) tool is usually used to obtain the INUTD, but it consumes huge computational resources and time, which may not be suitable for coupling with control system. To address this research question, this study proposes a numerical modeling method for predicting the INUTD and air flowrate response of multiple diffusers for coordinated air flow control. Firstly, we establish a dataset with 5000 cases, along with the results of INUTD for each case. Then two models, namely room thermal response model (RTRModel) and air flowrate prediction model (AFPModel), are developed by machine learning algorithms to predict indoor temperature and supply air flowrate, respectively. The results show that proposed models are both fast in prediction, less than 1 s for each case. The standard deviation of error in RTRModel developed with support vector machine algorithm is 0.0041 while that in AFPModel developed with Convolutional Neural Network algorithm is 0.0198. Further, a comparative analysis has been conducted between the AFPModel with and without optimization algorithm. The results reveal that using optimization algorithm is more accurate, but it takes more time. While numerical modeling can instantaneous response with qualified accuracy. The proposed method can contribute to independently zonal environment control and occupant-centered micro-environment control.

Inverse determination of multiple heat sources’ release history in indoor environments

An Inverse Method Based on CFD to Determine the Temporal Release Rate of a Heat Source in Indoor Environments

A Cfd-Based Test Method For Control Of Indoor Environment In Air-Conditioned Rooms

Inverse Determination of Wall Boundary Convective Heat Fluxes in Indoor Environments Based on Cfd

A Multiple Model Approach for Predictive Control of Indoor Thermal Environment with High Resolution

A numerical method for two-dimensional nonlinear transient inverse heat conduction problems for orthotropic material

Optimal Specification of Target Temperature Points for Inverse Design of an Indoor Thermal Environment

Numerical Modeling of Non-Uniform Indoor Temperature Distribution for Coordinated Air Flow Control

Dynamical Source Term Estimation in a Multi-Compartment Building under Time-Varying Airflow

Inverse design of an indoor environment using a CFD-based adjoint method with the adaptive step size for adjusting the design parameters

Inverse modeling of thermal boundary conditions in commercial aircrafts based on Green's function and regularization method

Inverse design of an indoor environment using a filter-based topology method with experimental verification

A Combined CFD-based Genetic Algorithm and Human Body Thermoregulation Model for Designing the Indoor Thermal Environment

Air supply parameter optimization of a custom nonuniform temperature field based on the POD method

A Superposition Method to Predict Indoor Temperature Distribution with Convective Heat Gain/Loss Through the Building Envelope

Numerical Study On The Characteristics Of Heat Release From Human Body

Three-dimensional Temperature Field Inversion Calculation Based on an Artificial Intelligence Algorithm

Construction of Linear Temperature Model Using Non-Dimensional Heat Exchange Ratio: Towards Fast Prediction of Indoor Temperature and Heating, Ventilation and Air Conditioning Systems Control

Numerical Simulation on Indoor Thermal Environment of Radiant Flooring Cooling System with Displacement Ventilation

Inverse Design of Underfloor Heating Power Rates and Air-Supply Temperature for an Aircraft Cabin

Numerical analysis of outdoor thermal environment around buildings