Abstract:In this paper, angular displacement and angular velocity sensors based on coplanar waveguide (CPW) transmission lines and S-shaped split ring resonators (S-SRRs) are presented. The sensor consists of two parts, namely a CPW and an S-SRR, both lying on parallel planes. By this means, line-to-resonator magnetic coupling arises, the coupling level being dependent on the line-to-resonator relative angular orientation. The line-to-resonator coupling level is the key parameter responsible for modulating the amplitude of the frequency response seen between the CPW ports in the vicinity of the S-SRR fundamental resonance frequency. Specifically, an amplitude notch that can be visualized in the transmission coefficient is changed by the coupling strength, and it is characterized as the sensing variable. Thus, the relative angular orientation between the two parts is measured, when the S-SRR is attached to a rotating object. It follows that the rotation angle and speed can be inferred either by measuring the frequency response of the S-SRR-loaded line, or the response amplitude at a fixed frequency in the vicinity of resonance. It is in addition shown that the angular velocity can be accurately determined from the time-domain response of a carrier time-harmonic signal tuned at the S-SRR resonance frequency. The main advantage of the proposed device is its small size directly related to the small electrical size of the S-SRR, which allows for the design of compact angular displacement and velocity sensors at low frequencies. Despite the small size of the fabricated proof-of-concept prototype (electrically small structures do not usually reject signals efficiently), it exhibits good linearity (on a logarithmic scale), sensitivity and dynamic range.

Displacement Sensor With High Sensitivity and Linearity Based on a Half-Wavelength SIR for Crack Width Measurement

Nanometer-scale Displacement Sensor Based on Phase-Sensitive Diffraction Grating.

Highly Sensitive Lateral Deformable Optical MEMS Displacement Sensor: Anomalous Diffraction Studied by Rigorous Coupled-Wave Analysis.

Highly Sensitive Displacement Sensor Based on Composite Interference Established Within a Balloon-Shaped Bent Multimode Fiber Structure.

A High-Resolution Displacement Sensor Based on a Grating Interferometer with the Phase Modulation Technique

Differential Two-Wave Mixing Interferometer for Crack Detection in Metallic Structures Based on Laser-Induced Ultrasound

Subnanometer Resolution Displacement Sensor Based on a Grating Interferometric Cavity with Intensity Compensation and Phase Modulation

Design of novel highly sensitive sensors for crack detection in metal surfaces: theoretical foundation and experimental validation

Ultrasensitive microwave near-field based sensors for crack detection in metallic materials

Research on High Sensitivity Displacement Sensor Based on Planar Ring Micro-cavity Structure

Noncontact Group-Delay-Based Sensor for Metal Deformation and Crack Detection

An Electromagnetically Induced Transparency Inspired Antenna Sensor for Crack Monitoring

Ultrasensitive displacement sensor based on tunable horn-shaped resonators

A Small-Displacement Sensor Using Total Internal Reflection Theory and Surface Plasmon Resonance Technology for Heterodyne Interferometry

Angular Displacement and Velocity Sensors Based on Coplanar Waveguides (CPWs) Loaded with S-Shaped Split Ring Resonators (S-SRR)

Design of SAW Sensor for Longitudinal Strain Measurement with Improved Sensitivity

A Displacement Sensor Combining Cavity Tuning of A Laser with A Piezoelectric Transducer'S Subdivision Technique for A Bidirectional Sampling on the Rising and Falling Flanks

Design of Double-Layer Electrically Extremely Small-Size Displacement Sensor

Integrated High Sensitivity Displacement Sensor Based on Micro Ring Resonator

Reliable Crack Monitoring Based on Guided Wave Through Periodically Loaded Transmission Line

Two-Dimensional Wide Dynamic Range Displacement Sensor using Dielectric Resonator Coupled Microwave Circuit