Abstract:In the actual industrial production process, the method of adaptively tuning proportional–integral–derivative (PID) parameters online by neural network can adapt to different characteristics of different controlled objects better than the controller with PID. However, the commonly used microcontroller unit (MCU) cannot meet the application scenarios of real time and high reliability. Therefore, in this paper, a closed-loop motion control system based on BP neural network (BPNN) PID controller by using a Xilinx field programmable gate array (FPGA) solution is proposed. In the design of the controller, it is divided into several sub-modules according to the modular design idea. The forward propagation module is used to complete the forward propagation operation from the input layer to the output layer. The PID module implements the mapping of PID arithmetic to register transfer level (RTL) and is responsible for completing the output of control amount. The main state machine module generates enable signals that control the sequential execution of each sub-module. The error backpropagation and weight update module completes the update of the weights of each layer of the network. The peripheral modules of the control system are divided into two main parts. The speed measurement module completes the acquisition of the output pulse signal of the encoder and the measurement of the motor speed. The pulse width modulation (PWM) signal generation module generates PWM waves with different duty cycles to control the rotation speed of the motor. A co-simulation of Modelsim and Simulink is used to simulate and verify the system, and a test analysis is also performed on the development platform. The results show that the proposed system can realize the self-tuning of PID control parameters, and also has the characteristics of reliable performance, high real-time performance, and strong anti-interference. Compared with MCU, the convergence speed is far more than three orders of magnitude, which proves its superiority.

FPGAs in Industrial Control Applications

FPGA Design Methodology for Industrial Control Systems—A Review

FPGAs used in industrial control and instrumentation systems

Guest Editorial Special Section on Industrial Control Applications of FPGAs

Using advanced FPGA SoC technologies for the design of industrial control applications

Development of control algorithms for mobile robotics focused on their potential use for FPGA-based robots

FPGA-Based Optimization of Industrial Numerical Machine Tool Servo Drives

Development of embedded fuzzy control using reconfigurable FPGA technology

Design of Field Programmable Gate Array (FPGA) Based Emulators for Motor Control Applications

An overview of applications of Field Programmable Gate Array (FGPA)

Model Predictive Control System Based on FPGA and A Case Study

Optimal hardware/software partitioning of a system on chip FPGA-based sensorless AC drive current controller

Advantages of FPGA-based multiprocessor systems in industrial applications

Design of High-Performance Electrical Servo System Based on FPGA

Development and Implementation of Modular FPGA for a Multi-Motor Drive and Control Integrated System

A Design of FPGA-Based Neural Network PID Controller for Motion Control System

FPGA Realization of ANFIS Controller Using a Proposed Digital Design

A New Model Predictive Controller with Swarm Intelligence Implemented on FPGA

Study on Aero-Engine Electronic Controller Design Technology Based on FPGA

FPGA: The super chip in the age of artificial intelligence

A review on FPGA implementation of fractional-order systems and PID controllers