Study on reduction characteristics of Fe species in coal ash under SNCR condition

Jianjiang Wang,Bo Wei,Xian Li,Wenjun Yang,Cheng Zhang,Inamullah Mian,Houzhang Tan,Fengyun Ma
DOI: https://doi.org/10.1016/j.fuel.2020.118231
IF: 7.4
2020-10-01
Fuel
Abstract:<p>To obtain the reduction characteristics of NH<sub>3</sub> on Fe<sub>2</sub>O<sub>3</sub> in coal ash, and verify that the injected ammonia-bearing reductant led to slagging during SNCR, the slag sample was collected at the flue gas temperature range of 720 °C–780 °C in a medium temperature separation circulating fluidized bed boiler (MTS-CFBB). The XRF, XRD were used to determine the elemental distribution and mineral composition. The reduction reaction of CO, NH<sub>3</sub> with Fe<sub>2</sub>O<sub>3</sub> was calculated by HSC Chemistry 6.0 to obtain the reduction ability. Moreover, the mineral transformation in coal ash was studied by the tube furnace under N<sub>2</sub> and N<sub>2</sub>-NH<sub>3</sub> atmosphere. The results indicated that the contents of Fe<sub>2</sub>O<sub>3</sub> in the three layers of slag sample were 16.36%, 16.00%, and 12.63% respectively from outside to inside, which were higher than that in burned coal ash. The NH<sub>3</sub> has stronger reduction ability as compared to CO reacting with Fe<sub>2</sub>O<sub>3</sub> and Fe<sub>3</sub>O<sub>4</sub> at the temperature range of 720 °C–780 °C. With the reacting temperature increasing, the added NH<sub>3</sub> led to more Na and O release, lower decomposed temperature of CaSO<sub>4</sub>. The NH<sub>3</sub> reduced the Fe<sup>3+</sup> in coal ash to form the Fe<sub>3</sub>O<sub>4</sub>, FeO or other Fe<sup>2+</sup> contained compounds at the high-temperature. The formed Fe<sup>2+</sup> contained compounds with low melting temperature played a glue role to promote the slagging process. At last, the slagging mechanism caused by injected ammonia-bearing reductant under the SNCR condition was established.</p>
energy & fuels,engineering, chemical
What problem does this paper attempt to address?