Abstract:The converter controller model is the key part of a doubly-fed induction generator (DFIG) model.Because of the large number of controller parameters and the series connection between the PI controllers of inner and outer control loops,the traditional identification methods have some trouble with identifiability or engineering realization.A parameter identification method is proposed based on the disturbances made on the measurement signals of secondary side,which features multi-step identification and interactive iteration.The method separately makes disturbances on the measurement signals which are used as input of PI controllers in the converter control system.These disturbances can enlarge the effect of the triggered PI controller on the response of a DFIG.Therefore,parameters of the triggered PI controller can be identified by using its measurable control target as the observation.For the series connected PI controllers,the measurement signal disturbance will be made on the latter PI controller while shielding the change of the input measurement signal of the former PI controller. Thus,the decoupling identification can be carried out on the parameters of series connected PI controllers.Using the proposed method,the two parameters of each PI controller in the converter control system can be identified separately without any identifiability problem under the certain measurement signal disturbance.And the interactive iteration of identification can further improve the identification accuracy of total parameters.

Parameter Identification of Synchronous Condenser and Its Excitation System Considering Multivariate Coupling and Symmetry Characteristic

Identification of synchronous generator practical parameters based on time interval

Parameter Identification Of Synchronous Condenser Based On Sensitivity Analysis Of Parameters

Parameter Identification of Load Model Using Scatter Plot Based Global Sensitivity Analysis

Parameter identification of drive system for fixed-speed wind power generation units

Parameter Estimation of Synchronous Generator Based on Park Model

A study on the identifiability of synchronous generator parameters

On-line Frequency Response Method of Synchronous Machine Parameter Identification Based on Rotor Angle Measurement

Parameter Identification Method for Converter Controller of DFIG Based on Measurement Signal Disturbance

Parameter Identification of the Synthesis Load Model Considering Distribution Impedance and Compensation Capacitor

Modeling and Parameter Identification of DC/DC Converters in Both CCM and DCM Mode

Identification of Synchronous Generator Parameters Including Magnetic Saturation

Model parameter identification of DFIG based on short circuit current

Parameter Identification of Power Electronic Circuits Based on Hybrid Model

Parameter Identification of Synchronous Condenser Based on Grid Searching Method of Initial Values

PARAMETER IDENTIFICATION OF DC/DC POWER ELECTRONIC CIRCUITS BASED ON HYBRID SYSTEM MODEL

Network Parameter Identification and Estimation Based on Hybrid Measurement of WAMS/SCADA

Identification and Validation for Synchronous Generator Parameters Based on Recorded On-Line Disturbance Data

On-line parameter identification for large synchronous machines

Nonlinear Parameters Identification for Synchronous Generator Excitation Systems

Multi-Scenario Parameter Estimation for Synchronous Generation Systems