Abstract:Due to the occurrence of earth tremors which leads to the vibrations of foundations and perhaps failure of buildings and roads, it is therefore important to understand and have knowledge of the geomechanical soil properties for foundation design, assessment of risks and suggestion of mitigation plans in engineering structures and road construction. A total of 3 boreholes were drilled with the Standard Penetration Test (SPT) performed and Downhole Seismic Test (DST) carried out in the boreholes located within Assa to investigate the Geomechanical soil properties in the area. For the geophysical survey, the downhole seismic test was carried out to determine the P-wave and S-wave. The results were processed using the generalized reciprocal method (GRM) with the Seisimager program. The results of soil dynamic modulus (shear, young and bulk modulus) and Poisson ratio recorded from DST conducted in BH1, BH2 and BH3 ranges from 7300 KPa to 72390 KPa, 0.31 to 0.41 for the Poisson ratio. Meanwhile, soil static modulus and Poisson’s ratio recorded from SPT conducted in BH1, BH2 and BH3 ranges from 2520 to 44687.0 KPa, 0.20 to 0.55 for the Poisson ratio respectively. The results of this study have shown that there is a wide variation between geomechanical properties derived from geotechnical investigations (static properties) and geophysical investigations (dynamic properties). Based on depth trend analysis, the dynamic and static soil elastic properties all increases with depth. Generally, the dynamic soil properties were significantly higher than the static elastic properties. At shallow depths (<12.0 m), the difference between static and dynamic soil modulus was relatively small, but increased with increasing depth. Meanwhile, the difference between static and dynamic Poisson ratio was high at shallow depth and it decreased with increased depths where they almost overlap. Correlation between the derived static and dynamic properties all revealed positive correlation trends. The strength of the correlation was highest for young modulus (r=0.87) which was closely followed by the shear modulus (r=0.63). Meanwhile, Poisson ratio (r=0.40) and bulk modulus (r=0.23) revealed weak positive correlation trends. The regression models generated from this study were used to derive static elastic properties and compared with the static properties obtained from geotechnical investigation thereby deriving the equations Dynamic Shear Modulus = (1.4207 x Static Shear Modulus) + 5022, Dynamic Young Modulus = (2.0241 x static young modulus) + 5054.8, Dynamic Bulk Modulus = (1.7852 x static bulk modulus) + 15458, Dynamic Poisson’s ratio = (0.1812 x Static Poisson’s ratio) + 0.3154. The results showed fairly good match between static (geotechnical) shear modulus and static (from regression model) shear modulus, static (geotechnical) young modulus and static (from regression model) young modulus. There was no good match obtained for bulk modulus and Poisson ratio generally, except at shallow depth (< 12 m depth) where Poisson ratio revealed a good match.

Assessment of thermal and physicochemical properties of mechanic village soils derived from two different geological formations in Ogun State, Nigeria

Concentrations and health risk appraisal of heavy metals and volatile organic compounds in soils of automobile mechanic villages in Ogun State, Nigeria

Mineralogical compositions of soils under three geological formations in some parts of Ogun state, Nigeria and their agricultural potentials

Effects of different land uses on soil physical and chemical properties in Odeda LGA, Ogun State, Nigeria

Geotechnical investigation and statistical relationship of subsoil properties derived from two parent rock types in Southwestern Nigeria

Morphogenetic and geochemical assessment of wetland soils developed over Abeokuta formation of Ogun State Nigeria

Effects of Thermal Cycles on Soil Behaviour: Theoretical and Experimental Studies

COMPARATIVE ANALYSIS OF STATIC SHEAR MODULUS AND DYNAMIC SHEAR MODULUS DETERMINED BY GEOPHYSICAL AND GEOTECHNICAL INVESTIGATION

Geo-spatial sensing of physical properties a leeway to agricultural soil assessment

Study on the Effective Thermal Conductivity of Typical Light Petroleum Hydrocarbons-Contaminated Soil at Low Temperatures

Estimating Soil Organic Matter: A Case Study of Soil Physical Properties for Environment-Related Issues in Southeast Nigeria

MEASUREMENT AND ANALYSIS OF THE ELECTRICAL PROPERTIES OF REMEDIATED CRUDE OIL IMPACTED

Assessment of Spatial Variability of Physico-chemical Properties of Soil at Crop, Soil and Pest Management Research Farm, FUTA

Investigation into the Mechanical Behaviour of Silica Rich Bituminous Sand

Experimental Study and Modelling of the Thermal Conductivity of Sandy Soils of Different Porosities and Water Contents

Suitable Models for Describing Sulphate Desorption Kinetics in Selected Bauchi North Soils of Varying Parent Materials in the Nigerian Sudan Savanna

Soil Mechanical Composition and Texture as Indices for On-site and Field Precise Choice of Land Use Type to Adopt

Effects of Temperature and Thermal Cycles on the Elastic Shear Modulus of Saturated Clay

Investigation of Petroleum Hydrocarbons in Soil from Auto-mobile Mechanic Workshops within Ikot Akpaden, Mkpat Enin L.G.A Akwa Ibom State Nigeria

Physicochemical characterization of low rank Nigerian coals

ArcGIS mapping, characterisations and modelling the physical and mechanical properties of the Sulaimani City soils, Kurdistan Region, Iraq