Abstract:Owing to the intrinsically good near-room-temperature thermoelectric performance, β-Ag2Se has been considered as a promising alternative to n-type Bi2Te3 thermoelectric materials. Herein, we develop an energy- and time-efficient wet mechanical alloying and spark plasma sintering method to prepare porous β-Ag2Se with hierarchical structures including high-density pores, a metastable phase, nanosized grains, semi-coherent grain boundaries, high-density dislocations, and localized strains, leading to an ultralow lattice thermal conductivity of ∼0.35 W m–1 K–1 at 300 K. A relatively high carrier mobility is obtained by adjusting the sintering temperature to obtain pores with an average size of ∼260 nm, therefore resulting in a figure of merit, zT, of ∼0.7 at 300 K and ∼0.9 at 390 K. The single parabolic band model predicts that zT of such porous β-Ag2Se can reach ∼1.1 at 300 K if the carrier concentration can be tuned to ∼1 × 1018 cm–3, suggesting that β-Ag2Se can be a competitive candidate for room-temperature thermoelectric applications.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c15341?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c15341</a>.XRD patterns and SEM images of the as-synthesized Ag2Se powders; statistical pore size distribution; TEM image of AS-573; equations of single parabolic band model and Wiedemann–Franz law; calculated μ0 values of the as-sintered samples; temperature-dependent η, L, and κe; and EPMA results showing the mole fraction of Ag and Se for the as-sintered samples (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c15341/suppl_file/am0c15341_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Boosting thermoelectric efficiency of Ag2Se through cold sintering process with Ag nano-precipitate formation

Effect of Sintering Temperature on the Thermoelectric Properties of Ag2Se Fabricated by Spark Plasma Sintering with High Compression

Fast, Simple, and Cost‐Effective Fabrication of High‐Performance Thermoelectric Ag2Se through Low‐Temperature Hot‐Pressing

Ag Interstitial Inhibition and Phonon Scattering at the ZnSe Nano-Precipitates to Enhance the Thermoelectric Performance of Ag 2 Se

Suppressing Ag2Te Nanoprecipitates for Enhancing Thermoelectric Efficiency of AgSbTe2

Enhancement of Thermoelectric Performance of Layered SnSe2 by Synergistic Modulation of Carrier Concentration and Suppression of Lattice Thermal Conductivity

Independently Tuning the Power Factor and Thermal Conductivity of SnSe Via Ag2S Addition and Nanostructuring

AgSbSe2 inclusions enabling high thermoelectric and mechanical performance in n-type Ag2Se-based composites

Engineering of Thermoelectric Composites Based on Silver Selenide in Aqueous Solution and Ambient Temperature

Hierarchical Structures Advance Thermoelectric Properties of Porous n-type β-Ag 2 Se

Liquid-Phase Manipulation Securing Enhanced Thermoelectric Performance of Ag 2 Se

Ultra-low lattice thermal conductivity and enhanced thermoelectric performance in Ag2−xSe1/3S1/3Te1/3 via anion permutation and cation modulation

Enhanced Thermoelectric Properties of Cu2SnSe3-Based Materials with Ag2Se Addition

Constructing n-type Ag2Se/CNTs composites toward synergistically enhanced thermoelectric and mechanical performance

Stoichiometric manipulation to enhance the thermoelectric and mechanical performance of Ag2Se1+x

High thermoelectric performance for an Ag<sub>2</sub>Se-based material prepared by a wet chemical method

Thermoelectric Ag2Se: Imperfection, Homogeneity, and Reproducibility.

Solvent-assisted synthesis of Ag2Se and Ag2S nanoparticles on carbon fabric for enhanced thermoelectric performance

Synthesis and Thermoelectric Properties of Ag-Doped Snse

Thermoelectric Ag 2 Se: Imperfection, Homogeneity, and Reproducibility

Enhanced thermoelectric properties of Cu-Se system via bond-structure adjustment by Ag-doping