Abstract:The established linear fatigue life prediction model based on the Miner rule has been widely applied to fatigue life prediction under constant amplitude uniaxial and multiaxial loading. Considering the physical significance of crack formation and propagation, a multiaxial equivalent linear fatigue life prediction model is put forward based on Miner rule and critical plane method under constant amplitude loading. The essence of this approach is that the equivalent strain, which consists of the shear strain and normal strain on the critical plane, replaces the relevant parameter of uniaxial nonlinear fatigue damage model. The principal axes of stress/strain rotate under non-proportional loading. Meanwhile, the microstructure of material and slip systems change, which lead to additional hardening effect. The ratio of cyclic yield stress to static yield stress is used to represent the cyclic hardening capacity of material, and the influence of phase difference and loading condition on the non-proportional hardening effect is considered. The multiaxial fatigue life is predicted using equivalent stain approach, maximum shear stain amplitude model, CXH model, and equivalent multiaxial liner model under proportional and/or non-proportional loading. The smooth and notched fatigue specimens of four kinds of materials (Q235B steel, titanium alloy TC4, Haynes 188, and Mod.9Cr-1Mo steel) are used in the multiaxial fatigue experiments to verify the proposed model. The predicted results of these materials are compared with the test results, and the results show that these four models can achieve good effect under proportional loading, but the proposed model performs better than the other three models under non-proportional loading. Meanwhile, it also verifies that the proposed enhancement factor can reflect the influence of phase difference and material properties on additional hardening.

Prediction of fatigue crack growth and residual life using an exponential model: Part II (mode-I overload induced retardation)

Stochastic modelling of fatigue crack growth under constant amplitude loading

Fatigue crack growth in degrading elastic components of nonlinear structural systems under random loading

An engineering model of fatigue crack growth under variable amplitude loading

A New Empirical Life Prediction Model For 9-12%Cr Steels Under Low Cycle Fatigue And Creep Fatigue Interaction Loadings

Prediction of Fatigue Crack Initiation under Variable Amplitude Loading: Literature Review

High-cycle and low-cycle fatigue life prediction under random multiaxial loadings without cycle counting

Theoretical Estimation of Fatigue Life before Crack Initiation in Metal Materials at Variable Cycle Stresses

A novel fatigue-oxidation-creep life prediction method under non-proportional loading

Fatigue crack growth prediction model under variable amplitude loading conditions

Fatigue analysis for the aluminum alloy 7050-T7451 performed by a two scale continuum damage mechanics model

A new method for prediction of fatigue crack propagation life under variable amplitude spectrum loading

A new multiaxial fatigue life prediction model considering additional hardening effect

Prediction of fatigue crack growth life based on a new fusion model

A novel two-scale nonlinear damage accumulation model for vibration fatigue life prediction

A nonlinear cumulative fatigue damage life prediction model under combined cycle fatigue loading considering load interaction

A fatigue crack growth life prediction model for metal matrix nanocomposites: contribution of strengthening factors

Life Prediction of Corrosion-Fatigue Based on a New Crack Growth Rate Model with Damage and the Extended Finite Element Method

Crack growth-based life prediction for additively manufactured metallic materials considering surface roughness

Computational Monitoring of an Initial Fatigue Crack Incubation and Growth in a Smooth Specimen

Prediction of Fatigue Crack Growth Retardation Using a Cyclic Cohesive Zone Model