Abstract:Global poultry waste production is substantial, with billions of poultry raised annually for meat and egg production, resulting in significant feather waste. Conventional poultry waste disposal methods are restricted due to environmental concerns. Meanwhile, wood-composite panel industries face raw material shortages, emphasizing the need for sustainable, renewable fiber sources. In this study, in the core layer of panels, wood particles were replaced with 5 wt% clean duck feathers without pretreatment to take advantage of feather attributes like hydrophobicity, thermal insulation, and sound damping as an alternative construction material. Three adhesives—urea-formaldehyde (UF), polymeric 4,4′-diphenylmethane diisocyanate (pMDI), and polyvinyl acetate (PVAc)—were examined for resin–feather compatibility. The control panels in this study were identical but wood was not replaced with feathers. The results revealed that wood–feather particleboard with pMDI and PVAc resins meets the requirements of the relevant standard for P2 boards (where applicable) concerning their modulus of rupture (MOR: 11 N·mm−2), modulus of elasticity (MOE: 1600 N·mm−2), internal bond (IB: 0.35 N·mm−2), and screw withdrawal resistance (SWR). However, those produced with UF resin did not meet the standards for IB and MOE. Furthermore, the physical properties showed similar water resistance and thickness swelling to control panels with pMDI. Notably, substituting 5 wt% wood with feathers improved thermal insulation by approximately 10% for UF and pMDI resins. Additionally, particleboard with feathers demonstrated improved sound absorption at high frequencies, ranging from 2500 to 500 Hz, particularly with pMDI resin, approaching Class B classification according to EN ISO 11654:1997. This study identifies the higher compatibility of pMDI over PVAc and UF adhesives for feather-based composite materials in construction applications.

Engineered wood flooring made of residual forest biomass with incorporated aluminum oxide microparticles

Mechanical and Water Soaking Properties of Medium Density Fiberboard with Wood Fiber and Soybean Protein Adhesive.

Performance of eucalypt particleboard with the addition of farm waste

Eco-friendly particleboard production from coconut waste valorization

PHYSICAL AND MECHANICAL PROPERTIES OF PARTICLEBOARD FROM Eucalyptus grandis PRODUCED BY UREA FORMALDEHYDE RESIN WITH SiO2 NANOPARTICLES

Substitution of urea-formaldehyde by renewable phenolic compound for environmentally appropriate production of particleboards

Influence of Pressing Temperatures on Physical–Mechanical Properties of Wood Particleboards Made with Urea-Formaldehyde Adhesive Containing Al2O3 and CuO Nanoparticles

Reengineering Wood into a High-Strength, and Light-Weight Bio-Composite Material for Structural Applications

Properties of patula pine plywood using phenolic resin-impregnated veneers

Boron-based polyelectrolyte complex nanocoating for fire protection of engineered wood

Izrada laminata upotrebom kompozita od drva i otpadne gume

Exploring strategies for valorizing wood processing waste: advancing sustainable, fully lignocellulosic biocomposites

Properties of MDF manufactured with mixtures of wood from paricá plantations and wood waste from native Amazonian species

Effect of Structural Design on the Pore Structure, Water Resistance, and Mechanical Properties of Engineered Wood/Bamboo Laminated Composites

Physical and Mechanical Properties of Particleboard Produced from Some Timber Trees Irrigated with Treated Wastewater

Preparation and Characterization of Particleboard Made from Industrial-Type Wood Particles and Discarded Duck Feathers

Sustainable Engineering Polymer Composites Fabricated Using Delignified Bamboo Fiber as Reinforcement and Walnut Shell Powder as Filler

Towards high performance wood composites through interface customization with cellulose-based adhesive

An environment-friendly, fire-resistant, thermal-insulating and mechanical-robust wood with anisotropic capacitive pressure-sensitive performance

Structure Formation in Engineered Wood Using Wood Waste and Biopolyurethane

Superficial analysis of different wood polymer composites exposed to artificial weathering