Abstract:Solid polymer electrolytes (SPEs) were investigated for several decades due to their good compatibility with electrodes. However, meeting the essential requirements for solid polymer electrolytes, including enhanced ionic conductivity, superior solubility with conductive lithium salts, and robust interface stability when in contact with a Li anode, remains a formidable challenge. In our work, we found that transition metal carbides (NiNbCeC) over mesoporous silica (SBA-15) can be filled into the Polyethylene Oxide (PEO) matrix to form composite solid electrolytes which can greatly improve the ionic conductivity of PEO. We investigate a series of transition metal carbides with varying mass ratios of Cerium (5%, 10%, and 20%) to fabricate All-Solid-State Li-S batteries (ASSLi-S). Our results demonstrate that different mass ratios of Cerium play a pivotal role in enhancing the ionic conductivity of the composite solid electrolytes, reducing impedance levels from 9150 O (20% Ce) to 4000 O (5% Ce) to 1730 O (10% Ce). At room temperature, the high initial specific capacity at 1C and reversible specific capacity after 100 cycles are 525 and 363 mAh/g, 605 and 403 mAh/g, 246.3 mAh/g and 63.28 mAh/g for 5% Ce, 10%, and 20%, respectively. Furthermore, long-term cycling tests of ASSLi-S cells at 0.5C reveal promising performance, with the cell containing 10% Ce solid electrolytes delivering an initial specific capacity of 1165.7 mAh/g and maintaining 335 mAh/g after 200 cycles. This represents a significant breakthrough, demonstrating that PEO-based solid electrolytes can achieve impressive electrochemical results at room temperature. SEM characterization was employed to assess the volume change in the solid electrolyte layer and elemental distribution of solid electrolyte materials through cross-sectional analysis. This analysis revealed that the failure modes of solid-state Li-S cells can also be attributed to the migration of sulfur elements from the cathode to the solid electrolyte layer during the cycling process. XRD was utilized to study the crystallinity of composite solid electrolytes. This study represents a significant stride in the progress of high-performance solid polymer electrolytes for All-Solid-State Li-S batteries, shedding light on the failure modes of such batteries. It underscores the potential of composites based on transition metal carbides in addressing crucial challenges for their practical implementation in Solid-State Lithium-Sulfur Batteries.

Single crystal Ni-rich layered cathodes enabling superior performance in all-solid-state batteries with PEO-based solid electrolytes

LiNi0.5Mn1.5O4 cathode microstructure for all-solid-state batteries

LiNi 0.5 Mn 1.5 O 4 Cathode Microstructure for All-Solid-State Batteries.

Well-dispersed single-crystalline nickel-rich cathode for long-life high-voltage all-solid-state batteries

Revealing the Design Principles of Ni-Rich Cathodes for All-Solid-State Batteries

In-situ coating and surface partial protonation co-promoting performance of single-crystal nickel-rich cathode in all-solid-state batteries

Tuning Ion/Electron Conducting Properties at Electrified Interfaces for Practical All‐Solid‐State Li–Metal Batteries

Outstanding electrochemical performances of the all-solid-state lithium battery using Ni-rich layered oxide cathode and sulfide electrolyte

A gradient oxy-thiophosphate-coated Ni-rich layered oxide cathode for stable all-solid-state Li-ion batteries

Novel PEO-based composite solid electrolytes for all-solid-state Li-S battery

Crack‐Free Single‐Crystalline LiNiO2 for High Energy Density All‐Solid‐State Batteries

High Performance Single-Crystal Ni-Rich Cathode Modification via Crystalline LLTO Nanocoating for All-Solid-State Lithium Batteries

Single crystal cathodes enabling high-performance all-solid-state lithium-ion batteries

The Effect of Single versus Polycrystalline Cathode Particles on All‐Solid‐State Battery Performance

SnF2-Catalyzed Lithiophilic-Lithiophobic Gradient Interface for High-Rate PEO-Based All-Solid-State Batteries

A Plastic-Crystal Electrolyte Layer Promotes Interfacial Stability of Ni-Rich Oxide Cathode in Li6PS5Cl-Based All-Solid-State Rechargeable Li Batteries

Enabling superior electrochemical performance of NCA cathode in Li5.5PS4.5Cl1.5-based solid-state batteries with a dual-electrolyte layer

Influence of the particle size of the Ni-rich cathode material on the electrochemical properties for all solid-state batteries

An Adjustable-Porosity Plastic Crystal Electrolyte Enables High-Performance All-Solid-State Lithium-Oxygen Batteries

Single‐ or Poly‐Crystalline Ni‐Rich Layered Cathode, Sulfide or Halide Solid Electrolyte: Which Will be the Winners for All‐Solid‐State Batteries?

Surface to Bulk Design Empowering Ni-rich Layered Oxide Cathode in Sulfide-Based All-Solid-State Batteries