Abstract:The utilisation of cotton waste as precursors in the synthesis of nanocrystalline cellulose has gained significant attention. This approach suggests a sustainable solution to address the growing concern of textile waste accumulation while simultaneously producing a valuable material. The main aim of this study is to examine the properties of cellulose nanocrystals (CNCs) obtained from postconsumer polyester–cotton waste and assess the effect of different fabric structures on the extraction and these properties. To acquire nanocellulose, a thorough decolourisation pretreatment process was utilised, which involved the treatment of polyester–cotton waste with sodium dithionite and hydrogen peroxide. Consequently, the postconsumer material was then treated with an acid hydrolysis method employing a 64% (v/v) sulphuric acid solution at 50 °C for 75 min, resulting in the formation of CNCs with average yield percentages ranging from 38.1% to 69.9%. Separation of the acid from the CNC was facilitated by a centrifugation process followed by dialysis against deionised water. Uniform dispersion was then achieved using ultrasonication. A variety of analytical techniques were employed to investigate the morphological, chemical, thermal, and physical properties of the isolated CNCs. Among these techniques, attenuated total reflection-Fourier-transform infrared spectroscopy (ATR-FTIR), energy-filtered transmission electron microscopy (EF-TEM), thermogravimetric analysis (TGA), and X-ray diffraction (XRD) were utilised to analyse the CNCs. The findings indicated that the separated CNCs exhibited a rod-shaped morphology, measuring between 78 and 358 nm in length and 5 and 16 nm in diameter, and also exhibited high crystallinity (75–89%) and good thermal stability. The extracted CNCs were mixed with polyvinyl alcohol (PVA) and glycerol to assess their reinforcing effect on plastic films. The prepared composite film exhibited improved mechanical properties and thermal stability. Incorporating CNCs led to a 31.9% increase in the tensile strength and a 42.33% rise in the modulus of elasticity. The results from this research proved that CNCs can be extracted from postconsumer mixed fabrics as a potential solution to effectively address the mounting concerns surrounding waste management in the textile industry and also provide avenues for enhancing the qualities of eco-friendly composite films.

Synthesis and properties of transparent PMMA/cellulose nanocomposites prepared by in situ polymerization in green solvent

Synergistic Impact of Cellulose Nanocrystals with Multiple Resins on Thermal and Mechanical Behavior

Compatibilization of poly(methyl methacrylate) and cellulose nanocrystals through co‐continuous phase to enhance the thermomechanical properties

Dispersion of Cellulose Nanofibers in Methacrylate-Based Nanocomposites

Cellulose nanofibril aerogels reinforcing polymethyl methacrylate with high optical transparency

Preparation of Poly (methyl Methacrylate)/nanometer Calcium Carbonate Composite by In-Situ Emulsion Polymerization

Environmentally Friendly High‐performance Polydimethylsiloxane Composites Reinforced with Renewable Cellulose Nanocrystals Based on Dynamic Silyl Ether Linkages

PMMA/TEMPO-oxidized cellulose nanofiber nanocomposite with improved mechanical properties, high transparency and tunable birefringence

In Situ Fast Polymerization of Graphene Nanosheets‐filled Poly(methyl Methacrylate) Nanocomposites

Acrylic Functionalization of Cellulose Nanocrystals with 2-Isocyanatoethyl Methacrylate and Formation of Composites with Poly(methyl methacrylate)

One promising thermoplastic material: Poly(methyl methacrylate) and its continuous glass fiber reinforced composites by redox polymerization

Robust cellulose nanofibrils reinforced poly(methyl methacrylate)/polystyrene binary blend composites with pebble‐shaped structure using Pickering emulsion gel

Enhanced Thermal Properties and Flame Retardancy of a Novel Transparent Poly(methyl Methacrylate)-Based Hybrid Prepared by the Sol–Gel Method

Preparation and characterization of transparent advanced smart nanocomposites reinforced by nanofibrillated cellulose/poly(methyl methacrylate)/methyl methacrylate/benzoyl peroxide

Green Bionanocomposites Based on Polyhydroxybutyrate and Filled with Cellulose Nanocrystals: Melting Processing and Characterization

Surface Mechanical Properties of Transparent Poly(methyl Methacrylate)/zirconia Nanocomposites Prepared by in Situ Bulk Polymerization

Cellulose nanocrystals as organic nanofillers for transparent polycarbonate films

Physicochemical Properties of Cellulose Nanocrystals Extracted from Postconsumer Polyester/Cotton-Blended Fabrics and Their Effects on PVA Composite Films

Fabrication of PMMA nanocomposite biomaterials reinforced by cellulose nanocrystals extracted from rice husk for dental applications

Preparation of a novel SiO2/PMMA nanocomposite with high transparency, thermal stability, and superior surface hardness via gamma‐radiation polymerization

Enhanced dispersion of cellulose nanocrystals in melt-processed polylactide-based nanocomposites