Abstract:In order to meet the growing industrial demand of high quality and high efficiency machining, long cutters with larger axial depth of cut are extensively implemented in peripheral milling of deep pockets, grooves, and thin-wall parts. However, due to their high flexibilities, chatter easily occurs during the machining process. It has been demonstrated that milling cutters with variable pitch and/or variable helix angles can mitigate the chatter, which are gaining increasingly important applications. Although this kind of cutters have been studied in some detail in previous research, few studies have focused on the interaction dynamics complicated by actual cutter runout in long tool-part contact zone. This paper systematically studies the dynamics and stability of variable-pitch/helix milling system with long end cutters. The cutters are divided into a series of axial disks, and each axial disk includes several cutting elements which are equal to the number of teeth. Variations of pitch and helix angles, cutter run-outs including radial offset and axial tilt, and mode shapes with the cross terms in the orthogonal direction, are assigned to these cutting elements. The system, involving multiple regenerative delays as well as the axially varying dynamics, is formulated as a matrix form of time-periodic delay differential equation with multi-modal dynamic parameters. An updated cross-axis and cross-point modal testing method is then proposed to obtain the dynamic parameters, which can effectively avoid multiple hits when impacting the cutter with hammer. The stability lobes are predicted in state space by developing an improved semi-discretization method, by which the pitch variations and actual runout effects on stability are investigated. It is shown that the stability lobes differ significantly when the combined effects of cross-axis and cross-point FRFs and actual cutter runout are considered. A series of cutting experiments is conducted to demonstrate the proposed model and method. Results show that these lobes well agree with the experimental results.

Trochoidal milling: investigation of dynamic stability and time domain simulation in an alternative path planning strategy

Trochoid-path-based FEM Simulation for High-Speed Milling of Aluminum Alloy

Optimisation of tool path shape in trochoidal milling using B-spline curves

Efficient Trochoidal Milling Based on Medial Axis Transformation and Inscribed Ellipse

A Novel Method for Trochoidal Milling Tool Path Tailoring Based on Curvature Variation

Time-Efficient Trochoidal Tool Path Generation for Milling Arbitrary Curved Slots

Modeling and Analysis of Micro Surface Topography from Ball-End Milling in a Trochoidal Milling Mode

Analysis of tool wear, chip and machined surface morphology in multi-axis milling process of Ni-based superalloy using the torus milling cutter

Modeling of variable-pitch/helix milling system considering axially varying dynamics with cutter runout offset and tilt effects

An improved time-varying stability analysis of micro milling considering tool wear

Role of trochoidal machining process parameter and chip morphology studies during end milling of AISI D3 steel

Modeling dynamics and stability of variable pitch and helix milling tools for development of a design method to maximize chatter stability

Milling Mechanism and Chattering Stability of Nickel-Based Superalloy Inconel 718

Investigation of variable pitch tool design for chatter suppression in milling of Ti-6Al-4 V: a comparison of simulation and experimental results

An Improved Tool Path Model Including Periodic Delay for Chatter Prediction in Milling

Modelling of the stability of variable helix end mills

An optimization method of trochoidal radius for trochoidal milling hole based on the adaptive feed rate scheduling

Efficient 5-Axis CNC Trochoidal Flank Milling of 3D Cavities Using Custom-Shaped Cutting Tools

Tool path optimization with stability constraints for ball-end milling cutters based on frequency domain controlling strategy

Symmetry breaking in milling dynamics

Chatter stability analysis and prediction for elliptical ultrasonic vibration-assisted milling process