Barrier, Mechanical, Thermal, and Rheological Properties of Plasticized Biopolymeric Films Manufactured by Co-Extrusion

Heidy Lorena Calambás Pulgarin,Carolina Caicedo
DOI: https://doi.org/10.3390/pr12030524
IF: 3.5
2024-03-06
Processes
Abstract:The thermal, rheological, mechanical, and barrier properties of flat biopolymeric films processed by extrusion with different proportions of plasticizer and surfactant were evaluated. In the first stage, pellets were developed through twin-screw extrusion using a temperature profile in the ascending step process. These samples were analyzed using rotational rheology analysis to understand the viscoelastic transitions through the behavior of the storage and loss modulus, as well as the incidence of complex viscosity concerning concentration. The interaction among the components was analyzed under infrared spectroscopy after the two processing stages, revealing the miscibility of the mixture due to the action of the surfactant. The degradation temperatures increased by more than 20 °C, generating thermal stability, and the temperatures related to polymer transitions were determined. In the second stage, co-extrusion was carried out using pellets from the blend with a melt flow index (MFI) suitable for this process. The samples TPS50-PLA50-T5 and TPS75-PLA25-T5-A10 presented MFI values of 2.27 and 1.72 g/10 min, respectively. These samples were co-extruded for the production of films, impacting the physical properties. The resistance to traction, Young's modulus, and elongation showed limited effectiveness of plasticizer and surfactant, with high resistance and elongation values (4.276 MPa and 2.63%) in the TPS50-PLA50-T5 film. Additionally, morphological analysis showed the detailed action of the plasticizer on the regular shapes of threads as a product of deformation during material processing. The barrel properties exhibited limited biopolymer–plastic–tensile miscibility, resulting in different water vapor permeability for the TPS75-PLA25-T5-A10 film on each side (a difference of two orders of magnitude). The contact angle corroborated the effect, with values in each case ranging from 103.7° to 30.3°. In conclusion, we assert that biopolymeric films, when modified with plasticizers and surfactants, can be tailored for various applications within the packaging sector while maintaining control over each film.
engineering, chemical
What problem does this paper attempt to address?
The main problem this paper attempts to address is the evaluation of the synergistic effects of Tween 20 compatibilizer and acetyl tributyl citrate (ATBC) plasticizer on thermoplastic starch (TPS) and polylactic acid (PLA) blends at different concentrations, particularly in the application of co-extrusion technology. Specifically, the study focuses on the following aspects: 1. **Mechanical Properties**: Assess the impact of different concentrations of plasticizers and compatibilizers on the tensile strength, Young's modulus, and elongation at break of TPS/PLA blends. 2. **Morphological Characteristics**: Analyze the microstructure of the sample surfaces using scanning electron microscopy (SEM) to understand the effects of plasticizers and compatibilizers on the material morphology. 3. **Thermal Properties**: Study the thermal stability, degradation temperature, and phase transition behavior of the blends using differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). 4. **Rheological Properties**: Analyze the viscosity, storage modulus, and loss modulus of the blends using a rotational rheometer to understand their rheological behavior. 5. **Surface Properties**: Evaluate the hydrophilicity and hydrophobicity of the samples through contact angle measurements. 6. **Water Vapor Transmission Rate (WVTR) and Water Vapor Permeability (WVP)**: Analyze the water vapor barrier properties of the films to assess their suitability for packaging applications. Through these comprehensive characterization methods, the study aims to gain an in-depth understanding of the structural and performance changes in TPS/PLA blends with the addition of different concentrations of plasticizers and compatibilizers, thereby providing scientific evidence for the development of biodegradable polymer films with excellent physical properties. These films are expected to be widely used in the packaging industry, especially in applications requiring high barrier performance.