Abstract:Mater-Bi® is one of the most commercialized starch-based blends used in biodegradable flexible packaging. However, the high ductility and low stiffness of Mater-Bi® might limit its application and developing a solution to tailor the stiffness and mechanical strength is highly desirable. In the present work, blends based on Mater-Bi® and poly-L-(lactic acid) (PLLA) at a different ratio from 70/30 to 50/50 wt% were prepared via melt-extrusion and the effect of the PLLA content and Joncryl ADR® as a reactive compatibilizing agent, on the mechanical properties, melts rheology, morphology and disintegration aptitude were investigated. The inclusion of PLLA in Mater-Bi® has a marked beneficial effect on the tensile strength and stiffness of the blend while maintaining acceptable ductility. The addition of the reactive compatibilizing agent contributed to improving the strength and elongation at the break of the blend. The melt rheology of the blend was also affected by the ratio of the two components, mostly when the Joncryl ADR® was present. The disintegration by biodegradation of the blend was preserved in the presence of PLLA, and it takes less than 30 days for the films to completely decompose and disintegrate under controlled composting conditions. Interestingly, a thin film from Mater-Bi®/PLLA 60/40 was successfully prepared by blown film extrusion, demonstrating a good balance between stretchability (elongation at break exceeding 100%) and stiffness (1.8 GPa). This work opened to broadening the use of starch-based biodegradable plastic toward more demanding applications such as mulching films.

Characterization and Properties of Nucleated Polylactide, Poly(butylene adipate-co-terephthalate), and Thermoplastic Starch Ternary Blend Films: Effects of Compatibilizer and Starch

Reactive Compatibilization of Polylactide, Thermoplastic Starch and Poly(butylene adipate-co-terephthalate) Biodegradable Ternary Blend Films

Preparation and Characteristics of Poly(butylene adipate-co-terephthalate)/Polylactide Blend Films via Synergistic Efficiency of Plasticization and Compatibilization

Synergistic effect of nucleation and compatibilization on the polylactide and poly(butylene adipate-co-terephthalate) blend films

Preparation, mechanical, and thermal properties of biodegradable polyesters/poly(lactic acid) blends

In situ reactive compatibilization of polylactic acid (PLA) and thermoplastic starch (TPS) blends; synthesis and evaluation of extrusion blown films thereof

Preparation, Characterization and Properties of Binary and Ternary Blends with Thermoplastic Starch, Poly(lactic Acid) and Poly(butylene Adipate-Co-terephthalate)

Studies on Rheological, Thermal, and Mechanical Properties of Polylactide/Methyl Methacrylate-Butadiene-Styrene Copolymer/Poly(propylene Carbonate) Polyurethane Ternary Blends

Effect of different modified starches on physical, morphological, thermomechanical, barrier and biodegradation properties of cassava starch and polybutylene adipate terephthalate blend film

Mechanical Properties, Crystallization and Biodegradation Behavior of the Polylactide/Poly(3-hydroxybutyrate-co-4-hydroxybutyrate)/Poly(but Ylene Adipate-Co-terephthalate) Blown Films

Rheological, Thermal and Mechanical Properties of Biodegradable Poly(lactic Acid)/poly(butylene Adipate-Co-terephthalate)/poly(propylene Carbonate) Polyurethane Trinary Blown Films

Study of Thermal, Mechanical and Barrier Properties of Biodegradable PLA/PBAT Films with Highly Oriented MMT

Study Of Biodegradable Polyactide/Poly(Butylene Adipate-Co-Terephthalate) Blends

Mechanical Properties, Thermal Behavior, Miscibility and Light Stability of the Poly(butylene Adipate-Co-terephthalate)/poly(propylene Carbonate)/polylactide Mulch Films

Thermoplastic starch/polyester films: effects of extrusion process and poly (lactic acid) addition

High Content of Thermoplastic Starch, Poly(butylenes Adipate-Co-terephthalate) and Poly(butylene Succinate) Ternary Blends with a Good Balance in Strength and Toughness.

Study on Thermal, Rheological, Mechanical, Morphological, and Barrier Properties of Poly(butylene Adipate-Co-terephthalate)/thermoplastic Starch/poly(propylene Carbonate) Biodegradable Blown Films

Effect of Compatibilizer Distribution on Thermal and Rheological Properties of Gelatinized Starch/Biodegradable Polyesters Blends

Processing Polymer Blends of Mater-Bi® and Poly-L-(Lactic Acid) for Blown Film Application with Enhanced Mechanical Strength

A reactive compatibilization with the compound containing four epoxy groups for polylactic acid/poly(butylene adipate-co-terephthalate)/thermoplastic starch ternary bio-composites

Effect of Maleic Anhydride and Titanate Coupling Agent As Additives on the Properties of Poly (butylene Adipate-Co-terephthalate)/thermoplastic Starch Films