Abstract:Widely present in the primary circuit of Nuclear Power Plants (NPP), Dissimilar Metal Welds (DMW) are inspected using Ultrasonic nondestructive Testing (UT) techniques to ensure the integrity of the structure and detect defects such as Stress Corrosion Cracking (SCC).In a previous collaborative research, CRIEPI and CEA have worked on the understanding of the propagation of ultrasonic waves in complex materials. Indeed, the ultrasonic propagation can be disturbed due to the anisotropic and inhomogeneous properties of the medium and the interpretation of inspection results can then be difficult. An analytical model, based on a dynamic ray theory, developed by CEA-LIST and implemented in the CIVA software had been used to predict the ultrasonic propagation in a DMW. The model evaluates the ray trajectories, the travel-time and the computation of the amplitude along the ray tube in a medium described thanks to a continuously varying description of its physical properties. In this study, the weld had been described by an analytical law of the crystallographic orientation. The simulated results of the detection of calibrated notches located in the buttering and the weld had been compared with experimental data and had shown a good agreement.The new collaborative program presented in this paper aims at detecting a real SCC defect located close to the root of the DMW. Thus, simulations have been performed for a DMW described with an analytical law and a smooth cartography of the crystallographic orientation. Furthermore, advanced ultrasonic testing methods have been used to inspect the specimen and detect the real SCC defect. Experimental and simulated results of the mock-up inspection have been compared.

Enhanced PAUT method with pulse compression for heavy-walled CASSs in nuclear power plants

Ultrasonic Guided Wave-Based Circumferential Scanning of Plates Using a Synthetic Aperture Focusing Technique

Evaluation of Pipe Axial Defeat Through the Use of Ultrasonic Guided Wave and Matching Pursuit

Simulation of PA-UT Sector Scanning Imaging of Irregular Defects in Polyethylene Pipe Based on Finite Element Analysis

Study on Industrial Computed Tomography Detection and Identification of Inclusion Defects in Thick-Wall Polyethylene Pipe Butt Fusion Joint Within Nuclear Power Plant

RECONSTRUCTION OF PHASED ARRAY ULTRASONIC TESTING IMAGE OF THROUGH HOLE BASED ON FINITE ELEMENT ANALYSIS

An Improved Phased Array Ultrasonic Testing Technique for Thick-Wall Polyethylene Pipe Used in Nuclear Power Plant

Ultrasonic Phased Array Technique for Defect Detection and Sizing in Heavy-Walled Cast Components

Ultrasonic Wave Propagation Analysis in Cast Stainless Steel With Solidification Grain Structure Predicted by Cellular Automaton Finite Element Approach

Enhancements of Eddy Current Testing Techniques for Quantitative Nondestructive Testing of Key Structural Components of Nuclear Power Plants

Evaluation of Wall Thinning in Carbon Steel Piping Based on Magnetic Saturation Pulsed Eddy Current Testing Method

Circumferential Ultrasonic Testing for Ultra- High Pressure Vessels and Pipes(1)

Circumferential Ultrasonic Testing for Ultra-high Pressure Vessels and Pipes(2)

Application of advanced ultrasonic testing methods to Dissimilar Metal Welds -- Comparison of simulated and experimental results

Compressive sensing of ultrasonic array data with full matrix capture in nozzle welds inspection

Ultrasonic wave propagation analyses in centrifugally cast stainless steel using solidification grain structure models

Quantitative non-destructive testing of local wall thinning defect based on an efficient simulator of pulsed eddy current testing signals

A Fast Finite Element Simulation Method of Phased Array Ultrasonic Testing and Its Application in Sleeve Fillet Weld Inspection

Physic perspective fusion of electromagnetic acoustic transducer and pulsed eddy current testing in non-destructive testing system

Enhanced Nondestructive Testing Using Pulsed Eddy Current and Electromagnetic Ultrasonic Techniques

A Hybrid Nondestructive Testing Method of Pulsed Eddy Current Testing and Electromagnetic Acoustic Transducer Techniques for Simultaneous Surface and Volumetric Defects Inspection