Abstract:Bamboo is found worldwide but is especially concentrated in tropical and subtropical areas with the major producing nations being China, Indonesia and Thailand with an annual production of 12 million tonnes. It has found uses in many applications such as: furniture, flooring, roofing, fencing, interior design and scaffolding in the construction industry. In this study, discarded waste bamboo furniture was used in the ground form as the raw material feedstock for the production of a series of biochars and activated carbons. The biochars were produced at different temperatures, namely, 723, 823, 923, 1,023, 1,123 and 1223 K, in a muffle furnace inerted with nitrogen and for different pyrolysis times. The product chars yields were 20–30% by weight of the raw material, surface areas were 100–350 m 2 /g. Other tests include elemental analysis, helium displacement density, pH, ICP-AES on a leachate sample. Four of the different temperature samples of biochar were used to adsorb the basic dye methylene blue and were shown to possess high adsorption capacities. Then, the same bamboo raw material powder was treated with acid and pyrolysed/activated in a nitrogen atmosphere at the same range of temperatures to produce activated carbons; these were characterized using similar test methods to the biochars. The yields are in the range 20–40% by weight of the raw material feedstock and the BET surface areas are in the range 200–600 m 2 /g. Three of the different temperature activated carbons were used to adsorb methylene blue and the results were compared with the biochar results. All the adsorption experimental isotherm results were analyzed using conventional isotherm equations. The benefits and cost implications of both biochar and activated carbon routes are discussed. The methylene blue adsorption capacities are extremely attractive in the range 0.42–1.12 mmol/g (150–300 mg/g char product) and extend to over 2.35 mmol/g (700 mg/g) for the bamboo derived activated carbons. The micropore and mesopore volumes have been determined under the various char and activated carbon experimental conditions and coupled with the surface areas; these results have been used to explain the trends in the methylene blue adsorption capacities.

Stabilized surface charge by optimizing the carbonization temperature of bamboo for sustainable dye degradation at varying pH

Evaluation of Engineered Hydrochar from KMnO4 Treated Bamboo Residues: Physicochemical Properties, Hygroscopic Dynamics, and Morphology.

Adsorption of microcystin-LR on the leaves-phyllostachys praecox-derived biochar

The Use of Gigantochloa Bamboo-Derived Biochar for the Removal of Methylene Blue from Aqueous Solution

Surface charge alteration of charcoal derived from bamboo leaves and understanding the interaction with anionic and cationic dye

Eco-friendly, Stable, and High-Performance Biochar Prepared by a Twice-Modification Scheme: Saccharification of Raw Materials & Thermal Air Oxidation of Biochar

Statistical modeling of methylene blue dye adsorption by high surface area mesoporous activated carbon from bamboo chip using KOH-assisted thermal activation

Modified Bamboo Charcoal as a Bifunctional Material for Methylene Blue Removal

Char Products From Bamboo Waste Pyrolysis and Acid Activation

Role of biochar in superoxide-dominated dye degradation in catalyst-activated peroxymonosulphate process

Enhanced Biochar Stabilities and Adsorption Properties for Tetracycline by Synthesizing Silica-Composited Biochar.

Aromaticity, polarity, and longevity of biochar derived from disposable bamboo chopsticks waste for environmental application

Efficient dye adsorption of mesoporous activated carbon from bamboo parenchyma cells by phosphoric acid activation

CO2 Adsorption by Bamboo Biochars Obtained via a Salt-Assisted Pyrolysis Route

Pyrolysis temperature effect on biochar-derived cow manure: Physicochemical properties and adsorption behavior toward organic dyes

Study of methylene blue dye removal using biochar derived from leaf and stem of Lantana camara L.

Effect of pyrolysis temperature on the chemical oxidation stability of bamboo biochar

3D Hierarchical Porous Activated Carbon Derived from Bamboo and Its Application for Textile Dye Removal: Kinetics, Isotherms, and Thermodynamic Studies

Modification of biochar by phosphoric acid via wet pyrolysis and using it for adsorption of methylene blue

A High-Performance Biochar Produced from Bamboo Pyrolysis with In-Situ Nitrogen Doping and Activation for Adsorption of Phenol and Methylene Blue

Enhancing the adsorption function of biochar by mechanochemical graphitization for organic pollutant removal