Enhancing the adsorption function of biochar by mechanochemical graphitization for organic pollutant removal

Peidong Su,Xiangyu Gao,Junke Zhang,Ridha Djellabi,Bo Yang,Qi Wu,Zhen Wen
DOI: https://doi.org/10.1007/s11783-021-1418-2
2021-03-25
Abstract:Biochar (BC) has been extensively studied as adsorbent for the treatment of water pollution. Despite the distinct advantages, the high calcination temperature and low adsorption capacity of pristine BC limit its practical applications. Most of the former studies focused on the structure and/or surface modification to improve the adsorption capacity of BC. However, the harsh experiment conditions involved in the biochar modification limited the application in industrial level. Herein, we introduced mechanical treatment into BC preparation to reduce the calcination temperature and improve the adsorption capacity simultaneously. The results indicated that the calcination temperature was reduced and the adsorption capacity of the treated BC was improved after mechanochemical treatment. Characterization of the samples disclosed that BCs were graphitized with the particle size reduced to nanoscale after treatment. Adsorption tests indicated that the mechanochemically treated BCs showed much better removal performance of organic contaminants than that of pristine BCs. For instance, among four pristine BCs (BC600, BC700, BC800, and BC900), only BC900 has strong adsorption capacity for MB, while BC600 has low adsorption capacity (1.2 mg/g). By comparison, the adsorption capacity of MB increased greatly to 173.96 mg/g by BC600-500/1 (treated at 500 r/min for 1 hour). To optimize the mechanochemical treatment, the effects of rotation speed and agitation duration were also investigated.
environmental sciences,engineering, environmental
What problem does this paper attempt to address?
The problem that this paper attempts to solve is how to enhance the adsorption function of biochar (BC) for organic pollutants through mechanochemical graphitization treatment while reducing its calcination temperature. Specifically, the research aims to improve the adsorption capacity of biochar through mechanochemical treatment and reduce the high - temperature conditions required in the preparation process, thereby increasing its feasibility and efficiency in practical applications. Traditionally, the high calcination temperature and low original adsorption capacity of biochar have limited its wide application. In addition, many methods used to improve the structure or surface characteristics of biochar are difficult to implement on an industrial scale due to harsh experimental conditions. Therefore, this paper proposes a new method, that is, optimizing the preparation process of biochar through mechanochemical treatment to overcome these limitations.