Abstract:This paper analyzes the microstructure and electrical insulation characteristics at the interface of 500 kV cross-linked polyethylene (XLPE) cable factory joints for extra high voltage direct current (EHVDC) application. The interface between two layers was polished by different grit sandpapers (80, 400, 1000, 2000, and 0000 (unpolished)). The samples (#1000) polished by 1000 grit mesh at the interface were degassed at 70 degrees C for 0, 12, 36, 90, and 200 h, respectively. Physico-chemical and electrical experiments were performed on the prepared test samples. It is found that increasing the number of sandpaper grit meshes reduces the average lamellae thickness at the interface and increases the crystallinity. Moreover, microporous defects are observed at the interface. The parameters viz elongation at break, current density, and the number of microporous defects increase initially and then decrease. However, the space charge accumulation, threshold electric field strength, and DC breakdown decrease initially and then increase. Notably, the #1000 roughness is a turning point. On the other side, degassing treatment promotes the orderly folding and recrystallization of the molecular chains arranged the amorphous region and significantly reduces the microporous defects at the interface. The mechanical properties are affected to a certain extent. The improved microstructure reduces the space charge accumulation and the current density of the sample, and increases the DC breakdown strength. An interfacial microscopic model and a charge transport model are proposed to analyze the mechanism of material properties under different roughnesses and electric fields. The results indicate that the ultra-smooth interface and degassing treatment strengthen the molecular chain linking at the interface. Moreover, they significantly reduce the microporous defects at the interface and improve the insulation properties of the factory joint. (C) 2021 Elsevier Ltd. All rights reserved.

Halogen free releasable semiconductive insulation shielding material and production method thereof

Development of Radiation Resistant,halogen-Free,low Smoke Generating and Flame Retardant EPDM Insulating Material for Cable

Insulation Properties and Interfacial Quantum Chemical Analysis of Cross-Linked Polyethylene under Different Degassing Time for HVDC Cable Factory Joint Applications

Development of Irradiation Resistant Low Smoke HFFR Insulating Compound for Cables for Nuclear Power Station

Interfacial Microstructure and Insulation Properties of 500 Kv EHVDC XLPE Cable Factory Joint under Different Roughness and Degassing Durations

Effect of Degassing Treatment Durations on Physico-Chemical and Electrical Properties of 500 Kv Extra HVDC XLPE Cable Insulation

Electrical Insulation Properties of Material Interfaces in HVDC Cable Factory Joint

Halogen-free flame retardant cable and preparation method tpe

Low-smoke halogen-free flame-retardant light power control cable

Low-smoke halogen-free flame-retardant power cable

Surface Layer Fluorination-Modulated Space Charge Behaviors in HVDC Cable Accessory

ELECTRICAL, MECHANICAL AND THERMAL PROPERTIES OF SEMICONDUCTIVE SHIELD MATERIALS PREPARED WITH GRAPHENE NANOSHEETS

Preparation of Polyurethane-Modified Silicone Rubber Insulating Coating and Its Application in 10 kV Overhead Bare Wire Wrapping

Research on the Vacuum Casting Epoxy Insulating Materials of High Voltage Cable Accessory

Preparation of Silane Precursor Microencapsulated Intumescent Flame Retardant and Its Enhancement on the Properties of Ethylene–vinyl Acetate Copolymer Cable

High temperature-resistant and ageing-resistant cable

Application of Magnesium Hydroxide/Diphenoxy Phosphate in Silicone Rubber Flame Retardant Cable Material

Influence of doping additive on thermophysical and rheological properties of halogen-free polymer composition for cable insulation and sheaths

Research progress of semiconductive shielding layer of HVDC cable

Research on Properties of CB/EVA Semiconductive Shielding Composites

Enhanced fire-retardancy of poly(ethylene vinyl acetate) electrical cable coatings containing microencapsulated ammonium polyphosphate as intumescent flame retardant