Abstract:The two-phase loop thermosyphon (TPLT) with a high filling ratio is considered an efficient heat transfer device and therefore has a good application prospect in the field of high heat flux dissipation engineering. However, the heat transfer mechanism of the TPLT with high filling ratios remains elusive. In this study, we establish a computational fluid dynamics (CFD) model of the loop thermosyphon. In order to accurately simulate boiling and condensation processes, we take into account the relationship between saturation temperature and pressure in the phase change model. There were two flow patterns, i.e., the bubbly flow and the slug flow, under low filling ratios in the heating section, in which the pool boiling dominates the main heat transfer mechanism, and dropwise condensation occurred in the condensation section. The driving force to propel the liquid during the vapor bubbles rise cannot be transferred to the liquid in the right tube, resulting in lower flow velocity. In stark contrast, the single-phase flow and the bubbly flow occurred periodically in the loop thermosyphon with high filling ratios, in which the dominant heat transfer mechanism is the flow boiling. The rising bubbles promote the clockwise flow of liquid in the loop like a pump. Because of the switch of the heat transfer mechanism, the average flow velocity increased, and the thermal resistance decreased. The minimum thermal resistance was 0.15 K/W under a filling ratio of 75%, and the maximum average velocity of the fluid was 0.19 m/s. Furthermore, we found a strong coupling relationship between the heat transfer performance and the flow characteristics of the loop thermosyphon. For low filling ratios, local dry-out occurred in the loop thermosyphon under a high input heat flux, leading to an increase in the thermal resistance. For high filling ratios, the average velocity of the fluid was augmented with the increase in heating power, while the liquid was capable of being replenished quickly in the heating section to avoid the dry-out. Therefore, the loop thermosyphon with high filling ratios enables a better heat transfer performance under a high heat flux than those with low filling ratios.

Heat transfer and two-phase flow of a metal foam enhanced horizontal loop thermosyphon for high power solar thermal applications

Experimental Investigation on the Heat Transfer Performance and Evaporation Temperature Fluctuation of a New-Type Metal Foam Multichannel Heat Pipe

Dynamic Thermal Response Characteristics of a Metal Foam Enhanced Horizontal Loop Thermosyphon

Experimental Study on an Thermosyphon Loop with Bubble Pump Effect

Experimental investigation on the heat transfer characteristics of loop thermosyphon with a micro-channel evaporator under low heat flux

Numerical simulation on the heat transfer characteristics of two-phase loop thermosyphon with high filling ratios

Heat transfer enhancement in a loop thermosyphon with microencapsulated phase change material suspension

Visualized Investigation of Gas–liquid Stratified Flow Boiling of Water in a Natural Circulation Thermosyphon Loop with Horizontal Arranged Evaporator

Experimental study on the effect of filling ratio on an R141b two-phase thermosyphon loop with a horizontal parallel tube evaporator

Performance Evaluation and Analysis of a Vertical Heat Pipe Latent Thermal Energy Storage System with Fins-Copper Foam Combination

Heat Transfer Characteristics and Operational Visualization of Two-Phase Loop Thermosyphon

Experimental investigation on air-cooling type loop thermosyphon thermal characteristic with serpentine tube heat exchanger

Radially graded metal foams arrangement in heat storage device of photothermal utilization systems

Experimental Study on a Forced-Circulation Loop Thermosiphon Solar Water Heating System

Role of Porous Metal Foam on the Heat Transfer Enhancement for a Thermal Energy Storage Tube

Thermodynamics Investigation of a Solar Power System Integrated Oil and Molten Salt As Heat Transfer Fluids

Numerical and Experimental Investigations of Latent Thermal Energy Storage Device Based on a Flat Micro-Heat Pipe Array–metal Foam Composite Structure

Visualization Research on a Pentane Loop Thermosyphon for Shaft Cooling

Visualized-experimental investigation on a mini-diameter loop thermosyphon with a wide range of filling ratios

Start-up Investigation and Heat Transfer Enhancement Analysis of a Loop Thermosyphon with Biomimetic Honeycomb-Channel Evaporator

Experimental and theoretical analysis of a closed loop two-phase thermosiphon under various states for latent heat storage