Abstract:This work aims to elucidate the hot deformation behavior and microstructure evolution of a non-equimolar TiZrHf-rich refractory high-entropy alloy (RHEA) with a composition of Ti2ZrHfV0.5Ta0.2 (at. %). The as-cast Ti2ZrHfV0.5Ta0.2 alloy composed solely of a body-centered cubic phase showed superior tensile mechanical properties with a yield strength of 865 MPa and a total elongation of 22.5%. The uniaxial compression tests were performed at temperatures ranging from 900 to 1100 °C and strain rates varying from 10−3 to 10−1 s−1. The relation among the flow stress, deformation temperature, and strain rate was represented by the Arrhenius-type constitutive equations. The calculations show a comparatively low apparent activation energy of 144–119 kJ/mol over the entire range of strains, revealing a noticeable contradiction between the concentration of group IV elements (Ti, Zr, Hf) and the high-temperature strength. The excessive addition of Group IV elements tends to deteriorate the high-temperature strength due to the relatively low melting points and self-diffusion activation energies of Group IV elements. The misorientation analysis based on electron back-scattered diffraction indicated that the dynamic recrystallization mechanism depends strongly on the thermo-mechanical processing conditions. A low deformation temperature and high strain rate results in an abnormal discontinuous dynamic recrystallization mechanism. Additionally, the dominant role played by the edge dislocation in RHEAs during deformation is supposed to be the reason for the abnormal discontinuous dynamic recrystallization mechanism. A series of stress drops were observed under low deformation temperatures and high strain rates. Based on an interrupted hot-compression experiment and a strain aging experiment, the stress drop can be attributed to the unlocking of dislocations pinned by the Cottrell atmosphere or short-range ordering.

Low-temperature precipitation of Al 3 (Zr,Er) dispersoids in an Al-0.4Fe-0.15Zr-0.25Er alloy processed by high pressure torsion

Atomic-scale study on the precipitation behavior of an Al-Zn-Mg-Cu alloy during isochronal aging

Thermal Stability of the Precipitates in Dilute Al-Er-Zr/Hf Alloys at Elevated Temperature

Study on Precipitation in (cocrfemnni)90al6ti4 High Entropy Alloy

Evolution of Grain Structure and Dynamic Precipitation during Hot Deformation in a Medium-Strength Al-Zn-Mg-Er-Zr Aluminum Alloy

Characterisation of precipitates formed in high-pressure torsion treated Mg-3.4at.%Zn alloy

Effect of High-Pressure Torsion Temperatures on the Precipitation and Properties of Cu-Cr Alloy

New insight into precipitation of Al3Zr and correlative effect on recrystallization behavior in a rapidly-solidified Al-Zn-Mg-Cu-Zr alloy

Microstructure Evolution during High-Pressure Torsion in a 7xxx AlZnMgZr Alloy

Precipitation Thermodynamics in an Al–Zn–Mg Alloy with Different Grain Sizes

High-resolution electron microscopy study of particle dispersion and precipitation in a nanostructured Al–2%Fe alloy

Effect of Al–Er–Zr Master Alloy on Grain Refinement After Heat Treatment

Characteristics of microstructural and mechanical evolution in 6111Al alloy containing Al3(Er,Zr) nanoprecipitates

Ultra-High Strength in FCC+BCC High-Entropy Alloy via Different Gradual Morphology

First-principles study on the effects of Er/Hf ratio on the properties of L12-Al3(Er,Hf)

Effect of Er and Zr additions and aging treatment on grain refinement of aluminum alloy fabricated by laser powder bed fusion

Dislocation evolution and induced precipitation on corrosion resistance of a novel Al-Mg-Zn-Er-Zr alloy during hot compression

Characterization of Al3Zr precipitation via double-step homogenization and recrystallization behavior after subsequent deformation in 2195 Al-Li alloy

Effect of Zr addition on the microstructure evolution and mechanical properties of extruded Al-Cu-Li-Mn alloys

Hot deformation behavior and microstructure evolution of non-equimolar Ti2ZrHfV0.5Ta0.2 refractory high-entropy alloy

Nucleation and growth of quasicrystal-related precipitates within the Al-matrix of AlEr(Fe) alloys