Abstract:Characterization of the damage behavior and failure mechanisms of the bonded‐bolted hybrid three‐bolt joint in composite laminates by a combined experimental and finite element approach. In this paper, the mechanical properties, damage modes, and bolt load distribution of the bonded‐bolted hybrid three‐bolt joint were investigated by a combination of experiments and numerical simulations. Acoustic emission (AE) was used to monitor the tensile process of the connection in real time, and the K‐means clustering algorithm was used to realize the cluster analysis of the damage modes. A numerical simulation model of the tensile process of the joint was established using ABAQUS simulation software. The progressive damage evolution of composite laminates, and adhesive layer was characterized by using the VUMAT subroutine, the B‐K failure criterion, and cohesive element with zero thickness, respectively. The results show that four main damage modes occur in composite laminates during tension: matrix cracking, delamination, fiber pull‐out, and fiber breakage, with corresponding peak frequency ranges of (0–80 kHz), (80–210 kHz), (210–330 kHz), and (330–375 kHz), respectively. The adhesive layer between the laminates mainly exhibits peeling failure because of the secondary bending effect. In the load‐bearing process, the adhesive layer was loaded first and failed, and the bolt loading was delayed. Meanwhile, the results of bolt load distribution showed that the bolts and the adhesive layer at both ends carried greater loads. Highlights Damage modes and damage evolution of the bonded‐bolted hybrid joint in tension were analyzed by combining acoustic emission technology and numerical simulation. The simulation of delamination damage in composite laminates was carried out by inserting zero‐thickness cohesive elements into the laminates, and the delamination damage between the carbon fiber layup and the adjacent glass fiber layup was analyzed. The effect of the inclusion of the adhesive layer on the mechanical properties of the joint and the distribution of the bolt load was analyzed.

Detection of bolt load loss in hybrid composite/metal bolted connections

Use of data-driven phase space models in assessing the strength of a bolted connection in a composite beam

Damage evolution monitoring and failure level evaluation of composite bolted joints by MXene/CNTs sensors

An Experimental Study on Bolt Looseness Monitoring Using Low-Cost Transfer Impedance Technique

Detection of Load Loss by Using a New Bolt Sensor

Nondestructive Damage Detection of a Magentostricive Composite Structure

Characterization of damage behavior and failure mechanisms of the bonded‐bolted hybrid three‐bolt joint in composite laminates

A Novel Contactless Bolt Preload Monitoring Method Using Digital Image Correlation

Detection of Damage in Bolted Steel Structures Using Vibration Signature Analysis

Fault Detection Method of Bolt-joint Using Acceleration and Impedance

Numerical Analysis for Damage Detection in CFRP Bolted Joints Using Strain Measurement

Multi-Bolt Loosening Monitoring Using an Integrated Vibro-Acoustic Modulation Technique

Contact Acoustic Nonlinearity (Can)-Based Continuous Monitoring of Bolt Loosening: Hybrid Use of High-Order Harmonics and Spectral Sidebands

Lamb Wave-Based Structural Health Monitoring On Composite Bolted Joints Under Tensile Load

Looseness Detection Utilizing FBG Based Operational Modal Strain for a Bolted Cantilever Plate

Electromechanical impedance instrumented wearable piezoelectric ring-type sensor for bolted connection monitoring

Investigation on the Progressive Damage and Bearing Failure Behavior of Composite Laminated Bolted Joints under Tension

Impedance‐based looseness detection of bolted joints using artificial neural network: An experimental study

Development of a portable damage detection system based on electromechanical impedance technique for monitoring of bolted joint structures

On-Site Health Monitoring of Composite Bolted Joint Using Built-In Distributed Eddy Current Sensor Network

Real time bolt preload monitoring using piezoceramic transducers and time reversal technique—a numerical study with experimental verification