Abstract:Bolted joints are widely used in industrial applications and joint failure can cause a disastrous accident if loosening happens. Bolt loosening detection can be made by regular manual inspection or by using sensors based on different physical principles, such as acoustoelastic effect, piezoelectric active sensing, and electromechanical impedance. Compared with the above methods, vibration based bolt looseness monitoring using accelerometers is appealing for its economy and convenience for measurement. In this paper, cargo bolts looseness monitoring under random excitation is studied based on vibration transmissibility, which overcomes the drawback of commonly used vibration methods in finding local bolt looseness. Vibration transmissibility analysis only uses two vibration transducers to monitor bolt group looseness, where the vibration signal below the cargo bolts is used as the “input” and the other one above the cargo bolts is used as the “output.” There are 12 bolts in the cargo bolts studied in this paper, providing an essential clamping force to fix cargo during transportation. Six kinds of bolt group looseness with an increasing degree are simulated in the experiment. The experimental analysis shows that variation of the spectral moment can be used to monitor the global variation of the torque wrench exerted on the cargo bolts. The early stage of the bolt group looseness is that some one or two bolts begin to loose; however, the spectrum moment factor is insensitive to the local bolt looseness in the bolt group. To address this issue, the eigensystem realization algorithm (ERA) based on random input and output is utilized to find the subtle eigenvalue variation of the system matrix, which is neglected by the frequency transmissibility function. The experimental results show the effectiveness of the proposed method for detecting local bolt looseness.

Multi-Bolt Loosening Monitoring Using an Integrated Vibro-Acoustic Modulation Technique

Continuous Monitoring of Residual Torque of Loose Bolt in a Bolted Joint

Monitoring of multi-bolt connection looseness using a novel vibro-acoustic method

Monitoring of bolt loosening using vibro-acoustic modulation (VAM)

Bolt Looseness Detection Using SH Guided Wave and Wave Energy Transmission

Vibration acoustic modulation for bolt looseness monitoring based on frequency-swept excitation and bispectrum

Artificial Intelligence (AI)-Based Evaluation of Bolt Loosening Using Vibro-Acoustic Modulation (VAM) Features from a Combination of Simulation and Experiments

Proof-of-concept study of high-order sideband for bolt loosening detection using vibroacoustic modulation method

Contact Acoustic Nonlinearity (Can)-Based Continuous Monitoring of Bolt Loosening: Hybrid Use of High-Order Harmonics and Spectral Sidebands

Integrated acoustic‐vibration frequency‐modulation technology to detect the contact nonlinear features of mechanical structure

Quantitative Evaluation of Residual Torque of a Loose Bolt Based on Wave Energy Dissipation and Vibro-Acoustic Modulation: A Comparative Study

Multi-bolt looseness monitoring using guided waves: a cross-correlation approach of the wavelet energy envelope

Study on the effect mechanism of vibration excitation parameters on bolt loosening based on an implicit monitoring method

Entire loosening stage monitoring of bolted joints via nonlinear electro-mechanical impedance spectroscopy

Interface behaviors of elastic-plastic waves and its impact on uncertainties in vibro-acoustic modulation (VAM) for structural health monitoring (SHM) of bolt loosening

Bolt tightness monitoring using multiple reconstructed narrowband lamb waves combined with piezoelectric ultrasonic transducer

Monitoring of the Looseness in Cargo Bolts under Random Excitation Based on Vibration Transmissibility

Application of Nonlinear-Modulation Technique for the Detection of Bolt Loosening in Frame Structure

IWSHM 2017: Structural health monitoring of the loosening in a multi-bolt structure using linear and modulated nonlinear ultrasound acoustic moments approach

Preload Monitoring of Bolted L-Shaped Lap Joints Using Virtual Time Reversal Method

Monitoring Method of Bolt Looseness Based on Inversion of Joint Surface Gap by Magnetic Field Change