Abstract:Functional electrical stimulation (FES) device has been widely used by spinal cord injury (SCI) patients in their rehab exercises to restore motor function to their paralysed muscles. The major challenge of muscle contraction induced by FES is early muscle fatigue due to the open-loop stimulation strategy. To reduce the early muscle fatigue phenomenon, a closed-loop FES system is proposed to track the angle of the limb’s movement and provide an accurate amount of charge according to the desired reference angle. Among the existing feedback controllers, fuzzy logic controller (FLC) has been found to exhibit good control performance in handling complex non-linear systems without developing any complex mathematical model. Recently, there has been considerable interest in the implementation of FLC in hardware embedded systems. Therefore, in this paper, a digital fuzzy feedback controller (FFC) embedded in a field-programmable gate array (FPGA) board was proposed. The digital FFC mainly consists of an analog-to-digital converter (ADC) Data Acquisition and FLC sub-modules. The FFC was designed to monitor and control the progress of knee extension movement by regulating the stimulus pulse width duration to meet the target angle. The knee is expected to extend to a maximum reference angle setting (70°, 40° or 30°) from its normal position of 0° once the stimulus charge is applied to the muscle by the FES device. Initially, the FLC was modelled using MATLAB Simulink. Then, the FLC was hardcoded into digital logic using hardware description language (HDL) Verilog codes. Thereafter, the performance of the digital FLC was tested with a knee extension model using the HDL co-simulation technique in MATLAB Simulink. Finally, for real-time verification, the designed digital FFC was downloaded to the Intel FPGA (DE2-115) board. The digital FFC utilized only 4% of the total FPGA (Cyclone IV E) logic elements (LEs) and required 238 μs to regulate stimulus pulse width data, including 3 μs for the FLC computation. The high processing speed of the digital FFC enables the stimulus pulse width duration to be updated every stimulation cycle. Furthermore, the implemented digital FFC has demonstrated good control performance in accurately controlling the stimulus pulse width duration to reach the desired reference angle with very small overshoot (1.4°) and steady-state error (0.4°). These promising results are very useful for a real-world closed-loop FES application.

Pole placement tuning of proportional integral derivative feedback controller for knee extension model

Optimized Proportional-Integral-Derivative Control Strategies and Simulation for Lower Limb Functional Electrical Stimulation

Adaptive Sliding Mode Feedback Control Algorithm for a NonLinear Knee Extension Model

Intelligent Algorithm Tuning PID Method of Function Electrical Stimulation Using Knee Joint Angle

Radial Basis Function Neural Network-Based PID Model for Functional Electrical Stimulation System Control

Closed-loop control of standing neuroprosthesis using PID controller

A Robust Fuzzy Fractional Order PID Design Based On Multi-Objective Optimization For Rehabilitation Device Control

Optimization and evaluation of a proportional derivative controller for planar arm movement

Design of an FPGA-Based Fuzzy Feedback Controller for Closed-Loop FES in Knee Joint Model

Ant Colony Optimization Tuning Pid Algorithm for Precision Control of Functional Electrical Stimulation

A Comparison of Closed-Loop Control Algorithms for Regulating Electrically Stimulated Knee Movements in Individuals With Spinal Cord Injury

A Simulation Study of Functional Electrical Stimulation for An Upper Limb Rehabilitation Robot using Iterative Learning Control (ILC) and Linear models

A Tube-Based Model Predictive Control Method to Regulate a Knee Joint With Functional Electrical Stimulation and Electric Motor Assist

BP Neural Network Tuning PID Algorithm for Precision Control of Functional Electrical Stimulation

Adaptive Particle Swarm Optimization of PID Gain Tuning for Lower-Limb Human Exoskeleton in Virtual Environment

Iterative Learning Control of Functional Electrical Stimulation Based on Joint Muscle Model

Fuzzy Logic Based Pid Control Of A 3 Dof Lower Limb Rehabilitation Robot

A Method For Fes Control Of Human Knee Joint With Time-Dependent Model Parameters

A PID-Controlled Approach in the Design of a Physiotherapy Robot for Upper Arm Rehabilitation

Robustness and Tracking Performance Evaluation of PID Motion Control of 7 DoF Anthropomorphic Exoskeleton Robot Assisted Upper Limb Rehabilitation

Design of Modified Adaptive PID Controller for Lower Limb Rehabilitation Robot based on Grey Wolf Optimization Algorithm