Abstract:The implementation of a progressive rehabilitation training model to promote patients' motivation efforts can greatly restore damaged central nervous system function in patients. Patients' active engagement can be effectively stimulated by assist-as-needed (AAN) robot rehabilitation training. However, its application in robotic therapy has been hindered by a simple determination method of robot-assisted torque which focuses on the evaluation of only the affected limb's movement ability. Moreover, the expected effect of assistance depends on the designer and deviates from the patient's expectations, and its applicability to different patients is deficient. In this study, we propose a control method with personalized treatment features based on the idea of estimating and mapping the stiffness of the patient's healthy limb. This control method comprises an interactive control module in the task-oriented space based on the quantitative evaluation of motion needs and an inner-loop position control module for the pneumatic swing cylinder in the joint space. An upper-limb endpoint stiffness estimation model was constructed, and a parameter identification algorithm was designed. The upper limb endpoint stiffness which characterizes the patient's ability to complete training movements was obtained by collecting surface electromyographic (sEMG) signals and human–robot interaction forces during patient movement. Then, the motor needs of the affected limb when completing the same movement were quantified based on the performance of the healthy limb. A stiffness-mapping algorithm was designed to dynamically adjust the rehabilitation training trajectory and auxiliary force of the robot based on the actual movement ability of the affected limb, achieving AAN control. Experimental studies were conducted on a self-developed pneumatic upper limb rehabilitation robot, and the results showed that the proposed AAN control method could effectively estimate the patient's movement needs and achieve progressive rehabilitation training. This rehabilitation training robot that simulates the movement characteristics of the patient's healthy limb drives the affected limb, making the intensity of the rehabilitation training task more in line with the patient's pre-morbid limb-use habits and also beneficial for the consistency of bilateral limb movements.

Position/force evaluation-based assist-as-needed control strategy design for upper limb rehabilitation exoskeleton

An Upper-Limb Power-Assist Exoskeleton Using Proportional Myoelectric Control

Control of a Soft Medical Exoskeleton via a Bio-inspired Approach

Adaptive CPG-Based Impedance Control for Assistive Lower Limb Exoskeleton

Fuzzy Adaptive Passive Control Strategy Design for Upper-Limb End-Effector Rehabilitation Robot

Adaptive robust backstepping force control of 1-dof joint exoskeleton for human performance augmentation

Development, Dynamic Modeling, and Multi-Modal Control of a Therapeutic Exoskeleton for Upper Limb Rehabilitation Training

Single-input adaptive fuzzy sliding mode control of the lower extremity exoskeleton based on human–robot interaction:

Patient-Active Control of a Powered Exoskeleton Targeting Upper Limb Rehabilitation Training

Performance-based assistance control for robot-mediated upper-limbs rehabilitation

Patient's Healthy-Limb Motion Characteristic-Based Assist-As-Needed Control Strategy for Upper-Limb Rehabilitation Robots

Flexible assistance strategy of lower limb rehabilitation exoskeleton based on admittance model

Iterative learning control applied to a hybrid rehabilitation exoskeleton system powered by PAM and FES

Force/position-based velocity control strategy for the lower limb rehabilitation robot during active training: design and validation

Design of an Active and Passive Control System of Hand Exoskeleton for Rehabilitation

Multi-modal control scheme for rehabilitation robotic exoskeletons

Cooperative Control for A Hybrid Rehabilitation System Combining Functional Electrical Stimulation and Robotic Exoskeleton

Human-machine Interaction Force Control: Using a Model-Referenced Adaptive Impedance Device to Control an Index Finger Exoskeleton

Fuzzy logic compliance adaptation for an assist-as-needed controller on the Gait Rehabilitation Exoskeleton (GAREX)

Evaluation of a Fused Sonomyography and Electromyography-Based Control on a Cable-Driven Ankle Exoskeleton

sEMG-Based Joint Force Control for an Upper-Limb Power-Assist Exoskeleton Robot