Synthesis of a Ce–La Adsorbent with Large Adsorption Capacity for Efficient Fluoride Removal from Leaching Solution of Spent Lithium-Ion Batteries

Jian Xu,Jie Gao,Mengmeng Wang,Shuang Tian,Chenxiao Lin,Yonggao Xia
DOI: https://doi.org/10.1021/acs.energyfuels.4c00435
IF: 4.6541
2024-04-04
Energy & Fuels
Abstract:The presence of fluoride in the leaching solution of spent lithium-ion batteries (LIBs) can harm product purity and the environment and potentially lead to the corrosion of recycling equipment. However, the development of fluoride adsorbents face challenges due to their limited adsorption capacity. Herein, flaky porous Ce–La oxides adsorbent with high metal content, synthesized using ammonia as a complexing and precipitating agent in a continuous stirred tank reactor (CSTR), are employed for fluoride removal. The maximum adsorption capacity of the Ce–La oxides adsorbent reaches up to 662.25 mg/g, greatly exceeding that of other reported adsorbents. Furthermore, the adsorbtent can be easily regenerated through desorption in NaOH solution in 0.5 h, with only an 8.4% decrease in adsorption capacity after four cycles. The F– concentration in the leaching solution of spent LiNi x Co y Mn1–x–y O2 (NCM)-based batteries can be reduced from 336.5 to 0.6 mg/L by the Ce–La oxides adsorbent, meeting the requirements for the production of battery grade Ni/Co/Mn sulfate solution. These results demonstrate that Ce–La oxides adsorbent with superior fluoride adsorption performance can be produced via a straightforward method that is suitable for large-scale production.
energy & fuels,engineering, chemical
What problem does this paper attempt to address?