Abstract:Benefiting from the high critical current density (Jc), single-grain (RE)BCO (where RE = rare earth or Gd) bulks are capable of trapping over 17.6 T magnetic field which is crucial for the application of bulk superconductors. Nevertheless, during field cooling magnetization (FCM), the large mechanical stress induced by Lorentz forces may lead to fracture behavior in the brittle ceramic nature of (RE)BCO materials. Most previous numerical models that adopted simplified homogeneous Jc had difficulty reflecting the real stress/strain situation in high temperature superconductor (HTS) bulks. Based on the proposed modified Jirsa model considering r-z plane Jc inhomogeneity, we investigate the mechanical response of GdBCO bulks manufactured by top-seeded melt growth (TSMG) process. A 2D axisymmetric electromagnetic-thermal-mechanical coupled model is implemented to take into account the dependence of Jc upon mechanical deformation. The simulation results show the electromagnetic-thermal-mechanical response of the r-z plane inhomogeneous Jc model is significantly lower than that obtained by the homogeneous Jc model. This confirms Takahashi's speculation (K Takahashi 2019 Supercond. Sci. Technol. 32 015007) about the mismatch between experimental data and the simulation results of homogeneous Jc model, and suggests the stress levels in the bottom plane of HTS bulk are overestimated by the previous homogeneous Jc model. On top of that, the overall stress level of GdBCO bulk is strongly determined by the magnitude and position of the Lorentz force load, and the stress distribution of inhomogeneous Jc model is mainly concentrated in high Jc regions near top surface, instead of being symmetrically distributed along the z-axis as in homogeneous Jc model. The mechanical response of stainless steel reinforced GdBCO bulk under two different constraint conditions was analyzed and compared. Finally, the coupling effect between the fracture strength variability caused by defects and cracks and the trapped field in GdBCO bulks with r-z plane Jc inhomogeneity is further studied. This study may provide a relatively realistic mechanical response of HTS bulk during FCM, and a novel design consideration for its mechanical reinforcement.

The levitation force and stiffness enhancement of single domain GdBCO bulk superconductor by an axial background magnetic field

Investigation on magnetic levitation force of recycled multi-domain GdBCO bulk superconductor

Enhancement of Levitation Force Characteristics in High Tc Superconducting Levitation.

Anisotropy Effect on Levitation Performance of Bulk High-Tc Superconductors above a Permanent Magnet Guideway

Enhancing levitation force of superconductors through wavelength optimization in halbach permanent magnet arrays

Dynamic Guidance Performance of GdBaCuO and YBaCuO Bulk Single Grain Superconductors under a Varying External Magnetic Field

Magnetic and levitation characteristics of bulk high-temperature superconducting magnets above a permanent magnet guideway

Magnetic levitation force between a superconducting bulk magnet and a permanent magnet

Optimization Study of the Halbach Permanent Magnetic Guideway for High Temperature Superconducting Magnetic Levitation

Axial Stiffness Augmentation by adding Superconductor Bulks or Limiting Permanent Magnet Rings to a Horizontal Axis Zero-Field Cooled High-Tc Radial Passive Superconducting Bearing

Influence of Re-magnetized HTS Bulk Samples on the Levitation Performances of a Maglev System

Very strong levitation force and stability achieved with a large MgB 2 superconductor disc

Design and Analysis of Superconducting Magnets of a New Mixed Maglev Model

Magnetic performance change of multi-main-phase Nd–Ce–Fe–B magnets by diffusing (Nd, Pr)H x

R-z plane spatial critical current inhomogeneity-induced mechanical response of GdBCO superconducting bulks during field cooling magnetization

Levitation force measurement and characteristics analysis of double sided high temperature superconducting thin film device

Levitation Force of Melt-Textured YBCO Superconductors under Non-Quasi-static Situation

Effect of Reciprocating Motions Around Working Points on Levitation Force of Superconductor-Magnet System

Levitation Characteristics of High-Temperature Superconducting Bulks of Different Orientations and Arrays

Dynamic modeling of levitation of a superconducting bulk by coupled $H$-magnetic field and Arbitrary Lagrangian-Eulerian formulations

Investigations of the behaviour of superconducting magnetic levitating set-ups including a large MgB2 disc and a smaller NdFeB magnet.