Abstract:Tube overheating is the leading cause of boiler tube failures that had led to tremendous replacement and maintenance costs. Boiler tube temperature is simultaneously affected by the heating effect of hot combustion gas in the furnace and the cooling effect of steam flow in boiler tubes. Thus, prediction of tube temperature needs to include the simulations of both the gas and steam flows of the boiler in the model. To compromise the significant scale difference between the boiler furnace and tubes, a coupled model that integrates a three-dimensional (3D) CFD model describing the gas flow and combustion processes in the furnace with a one-dimensional (1D) hydrodynamic model describing the steam flow in the boiler waterwall tubes was developed in this paper. The 3D CFD and 1D hydrodynamic models are coupled by iterative data exchange of boiler heat flux and steam temperature between the two models. In this way, this coupled model can incorporate all the key parameters that strongly affect the waterwall tube temperature, including the distributions of boiler heat flux, steam temperature and the convective heat transfer coefficient of steam flow in boiler tubes. In particular, the critical effects of steam maldistribution caused by both the structure of tube network system and uneven heat absorption of parallel tubes on tube temperature can be resolved by this model. This coupled model provides the capability to predict the detailed distribution of waterwall tube temperature and locate the areas of tube overheating under different boiler operating parameters. This coupled model was employed to predict the tube temperature distribution of the spiral waterwall of a 350 MW supercritical boiler. The predicted results show that the areas having higher risk of tube overheating are located near the outlet of spiral waterwall tubes where the steam temperature is the highest and on the wall areas where the local wall heat flux is the highest. The results strengthen the necessity of incorporating both the gas and steam sides of boiler into the model for accurate prediction of waterwall tube temperature.

Distributed parameters modeling for evaporation system in a once-through coal-fired twin-furnace boiler

Decoupling Investigation of Furnace Side and Evaporation System in a Pulverized-Coal Oxy-Fuel Combustion Boiler

The Study of Unified Thermal Calculation Model of Circulating Fluidized Bed Boiler Based on Experience

Mathematical Model and Simulation of the Evaporating Surface in a Once-Through Boiler

NUMERICAL MODELING OF 3-D ISOTHERMAL FLOW IN TANGENTIALLY-FIRED BOILER WITH BODY-FITTED MESHES

Thermal-hydraulic Calculation and Analysis on Evaporator System of a 660 MWe Ultra-Supercritical CFB Boiler

Simulation of Dynamic Characteristics of Supercritical Boiler Based on Coupling Model of Combustion and Hydrodynamics

Combustion Modeling Of Cfb Boiler Furnace Based On An Euler-Euler Approach

Experimental Investigation and Model Validation of the Heat Flux Profile in a 300 MW CFB Boiler

Integrated Numerical Model for Ultra/Supercritical CFB Boilers

Modeling of the axial distributions of volatile species in a circulating fluidized bed boiler

STUDY ON PREDICTION MODEL FOR TEMPERATURE OF FLUE GAS EXHAUSTED FROM UTILITY BOILERS BASED ON PROPERTIES OF FUEL COAL

Numerical and Experimental Study on Nonlinear Phenomena and Thermal Deviation Control in a 1000 MW Tower-Type Boiler

Simulation of the supercritical boiler evaporator operation under conditions of a rapid power increase

A coupled combustion and hydrodynamic model for the prediction of waterwall tube overheating of supercritical boiler

Modeling of a 300 MW Circulating Fluidized Bed Boiler

Linear Evaporation Model for Process of Supercritical Once-Through Boiler

Computational Modeling of Tangentially Fired Boiler (I) Models, Flow Field and Temperature Profiles

Modelica-based heating surface modelling and dynamic exergy analysis of 300 MW power plant boiler

Modeling of Combustion Process in 600 Mw Utility Boiler Using Comprehensive Models and Its Experimental Validation

Steam Temperature Characteristics in Boiler Water Wall Tubes Based on Furnace CFD and Hydrodynamic Coupling Model